TSL2581FN

TSL2581FN Datasheet


D 30y More Sensitive Than the TSL2560/61

Part Datasheet
TSL2581FN TSL2581FN TSL2581FN (pdf)
Related Parts Information
TSL2583FN TSL2583FN TSL2583FN
TSL2581CS TSL2581CS TSL2581CS
TSL2581CS-DB TSL2581CS-DB TSL2581CS-DB
TSL2581FNEVM TSL2581FNEVM TSL2581FNEVM
TSL2581CSEVM TSL2581CSEVM TSL2581CSEVM
TSL2581EVM TSL2581EVM TSL2581EVM
TSL2583CS TSL2583CS TSL2583CS
PDF Datasheet Preview
D 30y More Sensitive Than the TSL2560/61

Device

D Approximates Human Eye Response D Programmable ALS Interrupt Function with

User-Defined Upper and Lower Threshold Settings

D 16-Bit Digital Output with I2C Fast-Mode at
400 kHz

D Programmable Analog Gain and Integration

Time Supporting 1,000,000-to-1 Dynamic Range

D Available in Ultra-Small mm y mm Chipscale Package and Small 2 mm y 2 mm

Flat No-Lead Package

D Automatically Rejects 50/60-Hz Lighting

Ripple

D Low Quiescent Current 3 mA in Power

Down Mode

D RoHS Compliant

TSL2581, TSL2583 LIGHT-TO-DIGITAL CONVERTER

TAOS134 − MARCH 2011

PACKAGE CS 6-LEAD CHIPSCALE

TOP VIEW

VDD 1 ADDR SEL 2

GND 3
6 SDA 5 INT 4 SCL

PACKAGE FN DUAL FLAT NO-LEAD

TOP VIEW

VDD 1 ADDR SEL 2

GND 3
6 SDA 5 INT 4 SCL

Package Drawings are Not to Scale

D Ambient Light Sensor ALS for Display

Brightness Control

End Products and Market Segments D HDTVs D Laptops and Tablets D Mobile Handsets D Monitors

The TSL2581 and TSL2583 are very-high sensitivity light-to-digital converters that transform light intensity to a digital signal output capable of direct I2C interface. Each device combines one broadband photodiode visible plus infrared and one infrared-responding photodiode on a single CMOS integrated circuit capable of providing a near-photopic response over an effective 16-bit dynamic range 16-bit resolution . Two integrating ADCs convert the photodiode currents to a digital output that represents the irradiance measured on each channel. This digital output can be input to a microprocessor where illuminance ambient light level in lux is derived using an empirical formula to approximate the human eye response. The TSL2581 device supports a traditional level style interrupt that remains asserted until the firmware clears it.

While useful for general purpose light sensing applications, the TSL2581/83 devices are designed particularly for displays LCD, OLED, etc. with the purpose of extending battery life and providing optimum viewing in diverse lighting conditions. Display panel backlighting, which can account for up to 50 to 60 percent of total platform power, can be automatically managed. Both devices are also ideal for controlling keyboard illumination based upon ambient lighting conditions. Illuminance information can further be used to manage exposure control in digital cameras. The TSL2581/83 devices are ideal in notebook/tablet PCs, LCD monitors, flat-panel televisions, cell phones, and digital cameras. In addition, other applications include street light control, security lighting, sunlight harvesting, machine vision, and automotive instrumentation clusters.

The LUMENOLOGY r Company

Texas Advanced Optoelectronic Solutions Inc.
1001 Klein Road S Suite 300 S Plano, TX 75074 S 972r 673-0759

Copyright E 2011, TAOS Inc. 1

TSL2581, TSL2583 LIGHT-TO-DIGITAL CONVERTER

TAOS134 − MARCH 2011

Functional Block Diagram

Channel 0 Visible and IR
ORDERING NUMBER TSL2581CS TSL2581FN TSL2583CS TSL2583FN

Absolute Maximum Ratings over operating free-air temperature range unless otherwise noted †

Supply voltage, VDD see Note 1 V Digital output voltage range, VO V to V Digital output current, IO −1 mA to 20 mA Storage temperature range, Tstg −40°C to 85°C ESD tolerance, human body model 2000 V
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTE 1 All voltages are with respect to GND.

Recommended Operating Conditions

Supply voltage, VDD Operating free-air temperature, TA SCL, SDA input low voltage, VIL

SCL, SDA input high voltage, VIH NOTES Meets I2C specifications where VBUS = VDD

Meets I2C specifications where VBUS = V.

TSL2581 Note 2 TSL2583 Note 3 TSL2581 Note 2 TSL2583 Note 3

MIN −30

NOM MAX

UNIT V °C V

The LUMENOLOGY r Company

Copyright E 2011, TAOS Inc. 3

TSL2581, TSL2583 LIGHT-TO-DIGITAL CONVERTER

TAOS134 − MARCH 2011

Electrical Characteristics over recommended operating free-air temperature range unless otherwise noted

PARAMETER IDD Supply current

VOL INT, SDA output low voltage I LEAK Leakage current

TEST CONDITIONS Active Power down I2C activity 3 mA sink current 6 mA sink current

MIN TYP MAX UNIT
175 250 uA
10 uA
−5

Operating Characteristics, VDD = 3 V, TA = 255C, unless otherwise noted Notes 1, 2, 3, and 4

PARAMETER

TEST CONDITIONS

CHANNEL

MIN TYP MAX UNIT
fosc Oscillator frequency Dark ADC count value

Ee = 0, ATIME = 0xB6 200 ms ,
gain = 16x
705 750 795 kHz
counts

Ch0 ATIME = 0xDB 100 ms

Ch1 Full scale ADC count value

Ch0 ATIME = 0x6C 400 ms
37887 65535
counts

ADC count value
More datasheets: CWR-182-37-0000 | CWR-183-37-0000 | CWR-182-09-0021 | CWR-180-09-0021 | CWR-181-09-0021 | CWR-183-09-0021 | CWR-182-15-0003 | CWR-183-09-0000 | 70-841-015 | C1221/25


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived TSL2581FN Datasheet file may be downloaded here without warranties.

Datasheet ID: TSL2581FN 519839