AS1701/06 Demoboard Application Note
Part | Datasheet |
---|---|
![]() |
AS1701 DB (pdf) |
Related Parts | Information |
---|---|
![]() |
AS1706 DB |
PDF Datasheet Preview |
---|
AS1701/06 Demoboard Application Note AS1701/06 Demoboard Application Note austriamicrosystems AS1701/06 Demoboard Application Note Input/Output Description Table 1 Input/Output Description Mark Connector Description Input Connectors for single ended signal source. Power Supply Connectors for VCC and GND. OUT+ Outputs Connectors. OUT- austriamicrosystems Jumper Description Table 2 Jumper Description Mark Jumper Description SHDN Shutdown Output Impedance Set AS1701, to GND Normal operation. Load = 8Ohm Measurement Points Description Table 3 Measurement Points Description Mark Pin IN+ of Input Signal Ground of Input Signal Ground BIAS OUT+ OUT- Figure 1 Board Description AS1706, to VCC Normal operation. Load = 4Ohm Not Set Not recommended Load = 0Ohm Input Signal Connector Figure 2 Board Description Use a mono 1/8” 3.5mm mono jack figure 3 to connect the input signal with the input connector A . The head of the mono jack should be connected to IN+ of the signal while the shell is connected to ground. Figure 3 Mono Jack AS1701/06 Demoboard Application Note Circuit austriamicrosystems Starting Up Soldered Chip The AS1701/06 demo board is designed to work with the AS1701, and the AS1706. Before using the Demoboard please make sure which chip is on the board and set the Jumpers appropriate if necessary. The marking of the chip can be found printed on the IC soldered on the board. Per default an AS1701 is mounted on the Demoboard |
More datasheets: DM74AS374WM | 74F552QC | EBWT41 | 17000657A | N02 060 6117 001 | M13072 SL002 | M13072 SL001 | M13072 SL005 | FDMF8705 | 1098 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AS1701 DB Datasheet file may be downloaded here without warranties.