17E-1724-2

17E-1724-2 Datasheet

17E-1724-2 17E-1725-2 17E-1726-2 17E-1727-2 17E-1728-2

Part	Datasheet
17E-1724-2	17E-1724-2 (pdf)

Related Parts	Information
17E-1726-2	17E-1726-2
17E-1725-2	17E-1725-2
17E-1727-2	17E-1727-2
17E-1728-2	17E-1728-2

PDF Datasheet Preview
Plated Plastic Backshell SPECIFICATIONS: Housing Material: ABS Polymer Plating: Nickel over copper Grommet Material Mounting Hardware: PVC UL 94 VO Steel, clear zinc *All materials are RoHS compliant ASSEMBLY INSTRUCTIONS Select the tightest insert that will over the cable and thread the cable through it, placing the end with the smaller O.D. the end without the washer towards the connector. Cut the jacket, fold the shielding back over the outside of the insert and cut it just short of the washer. Install jackscrews and connector. Place the washer in the outermost depression in the exit area of the hood and screw the cover closed. ACCESSORIES Amphenol’s plated plastic backshell accommodates most standard and high-density D-Subminiature connectors and is appropriate for cable assemblies requiring compliance to FCC This version is highly durable and provides EMI/RFI protection. The rubber grommet compression insert forces the cable’s shielding against the inside of the cable exit area, assuring shielding. DIMENSIONS AND ORDERING INFORMATION Shell Standard # Size of Contacts Hi-Density # of Contacts 15 26 44 62 78 Part # 17E-1724-2 17E-1725-2 17E-1726-2 17E-1727-2 17E-1728-2 Dimensions Cable Diameter Range Minimum Maximum INCHES MM 58 TELEPHONE 416 754-5656 FAX 416 754-8668 E-MAIL:

PDF Datasheet Preview

Plated Plastic Backshell

SPECIFICATIONS:

Housing Material:

ABS Polymer

Plating:

Nickel over copper

Grommet Material Mounting Hardware:

PVC UL 94 VO Steel, clear zinc
*All materials are RoHS compliant

ASSEMBLY INSTRUCTIONS

Select the tightest insert that will over the cable and thread the cable through it, placing the end with the smaller O.D. the end without the washer towards the connector.

Cut the jacket, fold the shielding back over the outside of the insert and cut it just short of the washer.

Install jackscrews and connector. Place the washer in the outermost depression in the exit area
of the hood and screw the cover closed.

ACCESSORIES

Amphenol’s plated plastic backshell accommodates most standard and high-density D-Subminiature connectors and is appropriate for cable assemblies requiring compliance to FCC This version is highly durable and provides EMI/RFI protection. The rubber grommet compression insert forces the cable’s shielding against the inside of the cable exit area, assuring shielding.
DIMENSIONS AND ORDERING INFORMATION

Shell Standard # Size of Contacts

Hi-Density # of Contacts
15 26 44 62 78

Part #
17E-1724-2 17E-1725-2 17E-1726-2 17E-1727-2 17E-1728-2

Dimensions

Cable Diameter Range Minimum Maximum

INCHES MM 58

TELEPHONE 416 754-5656 FAX 416 754-8668 E-MAIL:

More datasheets: 74F379SJ | 74F379SC | 74F379SJX | 74F379SCX | 74F379PC | M2483 SL001 | M2483 SL005 | M2483 SL002 | DC-11402 | 17E-1726-2

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 17E-1724-2 Datasheet file may be downloaded here without warranties.

Datasheet ID: 17E-1724-2 517367