AOZ8006FI

AOZ8006FI Datasheet


AOZ8006

Part Datasheet
AOZ8006FI AOZ8006FI AOZ8006FI (pdf)
PDF Datasheet Preview
AOZ8006

Ultra-Low Capacitance TVS Diode Array

The AOZ8006 is a transient voltage suppressor array designed to protect high speed data lines such as HDMI and Gigabit Ethernet from damaging ESD events.

This device incorporates eight surge rated, low capacitance steering diodes and a TVS in a single package. During transient conditions, the steering diodes direct the transient to either the positive side of the power supply line or to ground.

The AOZ8006 provides a typical line to line capacitance of 0.47pF and low insertion loss up to 2GHz providing greater signal integrity making it ideally suited for HDMI applications, such as Digital TVs, DVD players, set-top boxes and mobile computing devices.

The AOZ8006 comes in RoHS compliant MSOP-10 packages and is rated -40°C to +85°C junction temperature range. The MSOP package features a flow through layout design.
● ESD protection for high-speed data lines IEC 61000-4-2, level 4 ESD immunity test ±15kV air discharge and ±8kV contact discharge Human Body Model HBM ±15kV
● Array of surge rated diodes with internal TVS diode ● Small package saves board space ● Protects four I/O lines ● Low capacitance between I/O lines 0.47pF ● Low clamping voltage ● Low operating voltage 5.0V
● HDMI ports ● Monitors and flat panel displays ● Set-top box ● USB power and data line protection ● Video graphics cards ● Digital Video Interface DVI ● 10/100/1000 Ethernet ● Notebook computers

AOZ8006

AOZ8006

TX2+ TX2-

TX1+

HDMI TX1Transmitter

TX0+ TX0-

CLK+ CLK-

Connector

RX2+ RX2-

RX1+ RX1-

RX0+ RX0-

HDMI Receiver

CLK+ CLK-

AOZ8006

Figure HDMI Ports

AOZ8006

Page 1 of 11

AOZ8006
Ordering Information

Ambient Temperature Range

AOZ8006FI
-40°C to +85°C

Package MSOP-10

Environmental

RoHS Compliant Green Product

All AOS products are offered in packages with Pb-free plating and compliant to RoHS standards. Please visit for additional information.

Pin Configuration

CH1 1 NC 2 VP 3

CH3 4 NC 5

MSOP-10

Top View
10 NC 9 CH2 8 GND 7 NC 6 CH4

Absolute Maximum Ratings

Exceeding the Absolute Maximum ratings may damage the device.

Parameter

Storage Temperature TS ESD Rating per IEC61000-4-2, contact 1 ESD Rating per IEC61000-4-2, air 1 ESD Rating per Human Body Model 2

IEC 61000-4-2 discharge with CDischarge = 150pF, RDischarge = Human Body Discharge per MIL-STD-883, Method 3015 CDischarge = 100pF, RDischarge =

Rating
-65°C to +150°C ±8kV ±15kV ±15kV

Maximum Operating Ratings

Junction Temperature TJ

Parameter

Rating -40°C to +125°C

Page 2 of 11

AOZ8006

Electrical Characteristics

TA = 25°C unless otherwise specified. Specifications in BOLD indicate a temperature range of -40°C to +85°C.

Symbol VRWM VBR IR VF VCL

Positive Transients Negative Transient Channel Clamp Voltage Positive Transients Negative Transient Channel Clamp Voltage Positive Transients Negative Transient Channel Input Capacitance

Channel Input Capacitance Matching

Conditions Between VP and GND 3 IT = 1mA, between VP and GND 4 VRWM = 5V, between VP and GND IF = 15mA IPP = 1A, tp = 100ns, any I/O pin to Ground 5 6

IPP = 5A, tp = 100ns, any I/O pin to Ground 5 6

IPP = 12A, tp = 100ns, any I/O pin to Ground 5 6

VR = 0V, f = 1MHz, any I/O pin to Ground 5 VR = 0V, f = 1MHz, between I/O pins 5 VP = 3.3V, VR = 1.65V, f = 1MHz, any I/O pin to Ground VP = 5.0V, VR = 2.5V, f = 1MHz, any I/O pins to ground VR = 0V, f = 1MHz, between I/O pins 5

Min.

Typ.

Max.

Units

V µA V
More datasheets: M5420 NC001 | KFF6636A | 2515 | MAL211838338E3 | MAL211828338E3 | CPDZ3V3U-HF | PD93-21C/TR8 | 76000875 | ATA6827N-PIQW | ATA6827-PIQW


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AOZ8006FI Datasheet file may be downloaded here without warranties.

Datasheet ID: AOZ8006FI 516329