A8732EEETR-T

A8732EEETR-T Datasheet

A8732 Ultra Small Mobile Phone Xenon Photoflash

Part	Datasheet
A8732EEETR-T	A8732EEETR-T (pdf)

PDF Datasheet Preview
A8732 Ultra Small Mobile Phone Xenon Photoflash Capacitor Charger with IGBT Driver Discontinued Product This device is no longer in production. The device should not be purchased for new design applications. Samples are no longer available. Date of status change December 3, 2013 Recommended Substitutions: For existing customer transition, and for new customers or new applications, contact Allegro Sales. NOTE For detailed information on purchasing options, contact your local Allegro field applications engineer or sales representative. A8732 Ultra Small Mobile Phone Xenon Photoflash Capacitor Charger with IGBT Driver Ultra small 2 x 2 DFN/MLP-8 package Low quiescent current draw uA max. in shutdown mode Primary-side output voltage sensing no resistor divider required Adjustable switch peak current limit up to A with single-wire programming through the CHARGE pin 1V logic VHI min compatibility Integrated IGBT driver with internal gate resistors Optimized for mobile phone, 1-cell Li+ battery applications Zero-voltage switching for lower loss >75% efficiency Charge complete indication Integrated 50 V DMOS switch with self-clamping protection Package 8-pin DFN/MLP suffix EE The Allegro A8732 is a Xenon photoflash charger IC designed to meet the needs of ultra low power, small form factor cameras, particularly camera phones. By using primary-side voltage sensing, the need for a secondary-side resistive voltage divider is eliminated. This has the additional benefit of reducing leakage currents on the secondary side of the transformer. To extend battery life, the A8732 features very low supply current draw uA max in shutdown mode . The switch current limit can be programmed from to A, in 16 steps with single wire interface, through the CHARGE pin. The IGBT driver also has internal gate resistors for minimum external component count. The charge and trigger voltage logic thresholds are set at 1 VHI min to support applications implementing low-voltage control logic. The A8732 is available in an 8-contact 2 mm x 2 mm DFN/MLP package with a maximum overall package height, and an exposed pad for enhanced thermal performance. It is lead Pb free with 100% matte tin leadframe plating. Not to scale 2 mm x 2 mm, mm height VIN_VDRV C2 CHARGE TRIG Battery Input + to V VBAT VOUT Detect SW Control Block ISW sense COUT 315 V VPULLUP DONE 100 kΩ DONE VIN_VDRV IGBT Driver IGBT Gate VIN_VDRV C2 CHARGE TRIG Battery Input + to V VBAT VOUT Detect SW Control Block ISW sense COUT 315 V VPULLUP

PDF Datasheet Preview

A8732 Ultra Small Mobile Phone Xenon Photoflash

Capacitor Charger with IGBT Driver

Discontinued Product

This device is no longer in production. The device should not be purchased for new design applications. Samples are no longer available.

Date of status change December 3, 2013

Recommended Substitutions:

For existing customer transition, and for new customers or new applications, contact Allegro Sales.

NOTE For detailed information on purchasing options, contact your local Allegro field applications engineer or sales representative.

A8732

Ultra Small Mobile Phone Xenon Photoflash Capacitor Charger with IGBT Driver

Ultra small 2 x 2 DFN/MLP-8 package Low quiescent current draw uA max. in shutdown mode Primary-side output voltage sensing no resistor divider required Adjustable switch peak current limit up to A with
single-wire programming through the CHARGE pin 1V logic VHI min compatibility Integrated IGBT driver with internal gate resistors Optimized for mobile phone, 1-cell Li+ battery applications Zero-voltage switching for lower loss >75% efficiency Charge complete indication Integrated 50 V DMOS switch with self-clamping
protection

Package 8-pin DFN/MLP suffix EE

The Allegro A8732 is a Xenon photoflash charger IC designed to meet the needs of ultra low power, small form factor cameras, particularly camera phones. By using primary-side voltage sensing, the need for a secondary-side resistive voltage divider is eliminated. This has the additional benefit of reducing leakage currents on the secondary side of the transformer. To extend battery life, the A8732 features very low supply current draw uA max in shutdown mode . The switch current limit can be programmed from to A, in 16 steps with single wire interface, through the CHARGE pin.

The IGBT driver also has internal gate resistors for minimum external component count. The charge and trigger voltage logic thresholds are set at 1 VHI min to support applications implementing low-voltage control logic.

The A8732 is available in an 8-contact 2 mm x 2 mm DFN/MLP package with a maximum overall package height, and an exposed pad for enhanced thermal performance. It is lead Pb free with 100% matte tin leadframe plating.

Not to scale
2 mm x 2 mm, mm height

VIN_VDRV C2

CHARGE

TRIG

Battery Input + to V

VBAT VOUT Detect SW

Control Block

ISW sense

COUT 315 V

VPULLUP

DONE
100 kΩ

DONE

VIN_VDRV IGBT Driver

IGBT Gate

VIN_VDRV C2 CHARGE

TRIG

Battery Input + to V

VBAT VOUT Detect SW

Control Block

ISW sense

COUT 315 V

VPULLUP

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived A8732EEETR-T Datasheet file may be downloaded here without warranties.

Datasheet ID: A8732EEETR-T 516091