Micro Servo - High Powered, High Torque Metal Gear ID 2307
Part | Datasheet |
---|---|
![]() |
2307 (pdf) |
PDF Datasheet Preview |
---|
Micro Servo - High Powered, High Torque Metal Gear ID 2307 Add even more power to your robot with this metal-geared servo. The tiny little servo can rotate approximately 180 degrees ~90 in each direction , and works just like the standard kinds you're used to but smaller. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. Despite its size, this micro-servo is as strong as many 'standard' size servos! Works great with the Motor Shield for Arduino, our 16-channel Servo Driver, or by just wiring up with the Servo library. Comes with a few horns and hardware. This micro servo packs a big punch for its little size. it's just a little bit bigger than our High Torque Metal Gear Micro Servo but runs with almost double the stall torque. To control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using the Servo library included with the Arduino IDE see here for an example sketch Position "0" 1.5ms pulse is middle, "90" ~2ms pulse is all the way to the right, "-90" ~1ms pulse is all the way to the left. 2/23/2015 |
More datasheets: 277200095302002 | AT25DF081-SSHN-B | A3974SEDTR-T | A3974SEDTR | A3974SED | A3974SED-T | DFR0506 | WB-RS232-24HP-A | HSHM-S055B1-5AP1-TR40B | 3094 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 2307 Datasheet file may be downloaded here without warranties.