DFR0506

DFR0506 Datasheet

7'' HDMI Display with Capacitive Touchscreen SKU DFR0506

Part	Datasheet
DFR0506	DFR0506 (pdf)

PDF Datasheet Preview
7'' HDMI Display with Capacitive Touchscreen SKU DFR0506 Introduction 7 HDMI Display with Capacitive Touchscreen This is a 7 HDMI display with capacitive touchscreen. It comes with a 7" LCD screen with capacitive touch panel overlay on it. The touch panel supports up to 5 touch points. And it adopts DFRobot USB free-driver technology, no special requirement of drivers. You can use it as easy as keyboard or mouse. It can be directly plugged to PC for touching control. In combination with HDMI HD screen, it can turn a large PC to a tablet immediately. The screen supports Windows, Linux and MAC OS. It can be used on Lattepanda, Raspberry Pi and other HDMI device. We also make some special hole to make it compatible with Arduino screw hole. You can mount them on the back of the display directly. There is no need for external power supply for the screen, it can be powered by USB port and HDMI port. The display also supports back light adjustment. It is very convenient to adjust backlight by potentiometer on the back of the display. Note Please guarantee the external power supply current is above when it is driven by raspberry Pi. The lower current will reduce the touching sensitivity. Specification • Operating Voltage 5V • Operating Current 160mA with HDMI connection • Maximum Operating current 1200mA • Refresh Frequency 43Hz not recommended 60Hz, it will not be full screen • Screen Resolution 1024x600 • Video Interface HDMI • Dimensions 183mm x 100mm/ x • Mounting hole size 3.1mm x 6mm • Weight 250g Screen Overview Back of 7 HDMI Display with Capacitive Touchscreen • Standard HDMI • Standard Micro USB Tutorial Touchscreen with Raspberry Pi You need to reset resolution to avoid touch differentiation caused by resolution difference between Raspberry Pi and the Touchscreen. • Enter /boot/config.txt, modify or add the project as below #remove black borders disable_overscan=1 #set specific CVT mode hdmi_cvt 1024 600 60 6 0 #set CVT as default hdmi_group=2 hdmi_mode=87 NOTE Windows and MAC operating system can capture resolution automatically, so you don't need to modify any parameter.

PDF Datasheet Preview

7'' HDMI Display with Capacitive Touchscreen SKU DFR0506

Introduction
7 HDMI Display with Capacitive Touchscreen This is a 7 HDMI display with capacitive touchscreen. It comes with a 7" LCD screen with capacitive touch panel overlay on it. The touch panel supports up to 5 touch points. And it adopts DFRobot USB free-driver technology, no special requirement of drivers. You can use it as easy as keyboard or mouse. It can be directly plugged to PC for touching control. In combination with HDMI HD screen, it can turn a large PC to a tablet immediately. The screen supports Windows, Linux and MAC OS. It can be used on Lattepanda, Raspberry Pi and other HDMI device. We also make some special hole to make it compatible with Arduino screw hole. You can mount them on the back of the display directly. There is no need for external power supply for the screen, it can be powered by USB port and HDMI port. The display also supports back light adjustment. It is very convenient to adjust backlight by potentiometer on the back of the display.

Note Please guarantee the external power supply current is above when it is driven by raspberry Pi. The lower current will reduce the touching sensitivity.

Specification
• Operating Voltage 5V
• Operating Current 160mA with HDMI connection
• Maximum Operating current 1200mA
• Refresh Frequency 43Hz not recommended 60Hz, it will not be full screen
• Screen Resolution 1024x600
• Video Interface HDMI
• Dimensions 183mm x 100mm/ x
• Mounting hole size 3.1mm x 6mm
• Weight 250g

Screen Overview

Back of 7 HDMI Display with Capacitive Touchscreen
• Standard HDMI
• Standard Micro USB

Tutorial

Touchscreen with Raspberry Pi

You need to reset resolution to avoid touch differentiation caused by resolution difference between Raspberry Pi and the Touchscreen.
• Enter /boot/config.txt, modify or add the project as below #remove black borders disable_overscan=1 #set specific CVT mode
hdmi_cvt 1024 600 60 6 0 #set CVT as default hdmi_group=2 hdmi_mode=87 NOTE Windows and MAC operating system can capture resolution automatically, so you don't need to modify any parameter.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DFR0506 Datasheet file may be downloaded here without warranties.

Datasheet ID: DFR0506 508805