2257

2257 Datasheet

PRODCT ID 2257

Part	Datasheet
2257	2257 (pdf)

PDF Datasheet Preview
Raspberry Pi Model B+ / Pi 2 / Pi 3 Case Lid - Clear PRODCT ID 2257 • Description Now that we have The Single Greatest Raspberry Pi Model B+ / Pi 2 / Pi 3 Case Ever - we decided to make it even better by adding COLORS!!!!! Mix and match snap-on lids and bases to form your favorite combinations. Buy one base then match different colored lids to your room or outfit. Or buy all of them so that you can adjust your Pi B+'s case based on your mood, your favorite sports team, or even your aura. With 81 unique combinations, the possibilities are fun, colorful and almost endless! This is just the clear lid of the Raspberry Pi Model B+ / Pi 2 / Pi 3 case. Check out our different colored bases or select a different color lid. This enclosure was designed by Mike Doell. It's made of ultra-durable, super-glossy polycarbonate, and is both good looking and tough enough to toss into your bookbag or toolbox. It has slim openings for all your cables, an easy-to-remove beveled slot for your Micro SD card, slots for both your Pi Camera and upcoming Display, and a space for your GPIO cable to extend out from the Pi. The Pi snaps into the base and the lid fits snugly onto the top. If you want to break out your Pi you can use your case without the lid and add hats to your B+ with ease. This case works for the Raspberry Pi Model B+ / Pi 2 / Pi 3 only. It does not work for the Raspberry Pi Model A or B. It does work with the model A+ but there will be a bit of empty space of course, and you'll need to snake your USB cable or connector through the front holes which may not work if the cable is bulky. No Raspberry Pi included. This is just the lid of the case and no base is included. • Technical Details o Dimensions 93mm x 65mm x 3mm / x o Weight 19g Engineered in NYC Adafruit

PDF Datasheet Preview

Raspberry Pi Model B+ / Pi 2 / Pi 3 Case Lid - Clear

PRODCT ID 2257
• Description

Now that we have The Single Greatest Raspberry Pi Model B+ / Pi 2 / Pi 3 Case Ever - we decided to make it even better by adding COLORS!!!!! Mix and match snap-on lids and bases to form your favorite combinations. Buy one base then match different colored lids to your room or outfit. Or buy all of them so that you can adjust your Pi B+'s case based on your mood, your favorite sports team, or even your aura. With 81 unique combinations, the possibilities are fun, colorful and almost endless! This is just the clear lid of the Raspberry Pi Model B+ / Pi 2 / Pi 3 case. Check out our different colored bases or select a different color lid.

This enclosure was designed by Mike Doell. It's made of ultra-durable, super-glossy polycarbonate, and is both good looking and tough enough to toss into your bookbag or toolbox. It has slim openings for all your cables, an easy-to-remove beveled slot for your Micro SD card, slots for both your Pi Camera and upcoming Display, and a space for your GPIO cable to extend out from the Pi. The Pi snaps into the base and the lid fits snugly onto the top. If you want to break out your Pi you can use your case without the lid and add hats to your B+ with ease. This case works for the Raspberry Pi Model B+ / Pi 2 / Pi 3 only. It does not work for the Raspberry Pi Model A or B. It does work with the model A+ but there will be a bit of empty space of course, and you'll need to snake your USB cable or connector through the front holes which may not work if the cable is bulky. No Raspberry Pi included. This is just the lid of the case and no base is included.
• Technical Details
o Dimensions 93mm x 65mm x 3mm / x o Weight 19g

Engineered in NYC Adafruit

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 2257 Datasheet file may be downloaded here without warranties.

2257

2257 Datasheet

Datasheet ID: 2257 508628