2162

2162 Datasheet

PRODUCT ID 2162

Part	Datasheet
2162	2162 (pdf)

PDF Datasheet Preview
Universal Qi Wireless Charging Transmitter PRODUCT ID 2162 • Description If you have a modern smart phone you may have noticed that it comes with built in wireless charging capability called 'Qi charging.' Qi is a trademark name for a thin and smart inductive charging system. Many large gadget companies have standardized on Qi, which means it's easy to find a charging dish and we thought it might be cool if your Arduino project can recharge itself wirelessly. We've added a ton of Qi receivers but, until now, we haven't had a charging base. No longer! This is a super simple Qi transmitter. It will work with any standard Qi charger receivers - like the ones we carry here. You just connect the board to a 5v power supply - either through a micro USB port - then put your device w/ Qi receive onto the base. If you want to 'share' the microUSB power connection, you can also connect direct to the USB-A port Maximum output is around 5W which is good for most smart phones, basically 1000mA charge at 5V on the other side of the wireless connection. It has a charging distance of 2-8mm, works with all our Qi charge receivers. You can only use one receiver per transmitter so if you want to charge two Qi devices at once, you'll need 2 transmitters. Note PCB may come in blue or green! • Technical Details o Input 5V o Input Current 2A o Maximum output power of 5W o Operating Frequency 100-200kHz o Charging Distance 2-8mm o Charging Plate Dimensions 53mm x 53mm x 4mm / x o PCB Dimensions w/ Components 55mm x 37mm x 6mm / x 1.5mm x o Weight 47g Engineered in NYC Adafruit

PDF Datasheet Preview

Universal Qi Wireless Charging Transmitter

PRODUCT ID 2162
• Description

If you have a modern smart phone you may have noticed that it comes with built in wireless charging capability called 'Qi charging.' Qi is a trademark name for a thin and smart inductive charging system. Many large gadget companies have standardized on Qi, which means it's easy to find a charging dish and we thought it might be cool if your Arduino project can recharge itself wirelessly. We've added a ton of Qi receivers but, until now, we haven't had a charging base. No longer! This is a super simple Qi transmitter. It will work with any standard Qi charger receivers - like the ones we carry here. You just connect the board to a 5v power supply - either through a micro USB port - then put your device w/ Qi receive onto the base. If you want to 'share' the microUSB power connection, you can also connect direct to the USB-A port Maximum output is around 5W which is good for most smart phones, basically 1000mA charge at 5V on the other side of the wireless connection. It has a charging distance of 2-8mm, works with all our Qi charge receivers. You can only use one receiver per transmitter so if you want to charge two Qi devices at once, you'll need 2 transmitters. Note PCB may come in blue or green!
• Technical Details
o Input 5V o Input Current 2A o Maximum output power of 5W o Operating Frequency 100-200kHz o Charging Distance 2-8mm o Charging Plate Dimensions 53mm x 53mm x 4mm / x o PCB Dimensions w/ Components 55mm x 37mm x 6mm / x 1.5mm x o Weight 47g

Engineered in NYC Adafruit

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 2162 Datasheet file may be downloaded here without warranties.

2162

2162 Datasheet

Datasheet ID: 2162 508382