1867

1867 Datasheet


PRODUCT ID 1867

Part Datasheet
1867 1867 1867 (pdf)
PDF Datasheet Preview
12mm Coin Cell Breakout w/ On-Off Switch

PRODUCT ID 1867

Simple but effective - this breakout board has a CR1220 coin cell battery holder soldered on, an on/off switch and pitch breakout pins for easy connecting. Great for powering very low-current projects, or adding a battery backup circuit to a real-time-clock or similar. There's two ground pins, one 'switched' power pin, and one pin that is always on.

Comes with one fully assembled and tested breakout plus a small stick of header so you can solder it on and plug into a breadboard.
11/12/2015

Technical Details

Dimensions:
25mm x 23mm x 1.5mm / 1" x Mounting hole distance 18mm x 16mm / x Weight 2g
More datasheets: MJS 1.5 | MJS 2 | MJS 2.5 | MJS 3 | MJS 350 | MJS 7 | MJS 6 | ACPM-920502-LT1 | S3030R-M | 1854


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 1867 Datasheet file may be downloaded here without warranties.

Datasheet ID: 1867 507612