ACPM-920502-LT1

ACPM-920502-LT1 Datasheet


ACPM-920502-LT1

Part Datasheet
ACPM-920502-LT1 ACPM-920502-LT1 ACPM-920502-LT1 (pdf)
PDF Datasheet Preview
ACPM-920502-LT1
3x4 UMTS B5 & B2 and LTE B5 & B2/B25 Multimode DualBand Power Amplifier Module with Integrated Coupler

Preliminary Data Sheet

The ACPM-920502 is the multimode dual-band power amplifier module with integrated directional couplers designed for UMTS 3GPP B2 & B5 and LTE B5 & B2/B25 handsets as well as the wireless data card applications. It is designed to meet the stringent linearity requirements of WCDMA, HSDPA, HSUPA, HSPA+ UL and LTE transmission while keeping excellent PAE over the entire power range by supporting 2 power modes low and high power modes . This PA has low quiescent current and high PAE in both power modes. So the average power consumption is minimized to enhance the talk time.

The ACPM-920502 contains integrated directional couplers, input and output matching networks, RF input & output DC blocking capacitors as well as the Vcc decoupling/bypass capacitors,. All these functions are integrated in a 16-pin surface-mount leadless package of 3x4 mm form factor and mm thickness, so it can minimize the number of external components.

The integrated LB & HB directional couplers are daisy-chained internally. One coupler input port and one coupler output port are shared by the both bands.

The ACPM-920502 has integrated on-chip Vref and on-module bias switch, so the external LDO regulators and switches for external Vref are not required. It also makes the PA fully digitalcontrollable by the baseband chipset. The Ven pin turns the PA on and off by the digital control signal. All of the digital control input pins such as the Ven and Vmode are fully CMOS compatible down to the 1.8V logic.
• Multimode dual-band PA supporting UMTS B5 & B2 and LTE B5 & B2/B25
• 2-mode power/gain control low power and high power modes
• Integrated daisy-chained LB & HB directional couplers
• High directivity small coupled power or delivered power
variation into mismatched load
• Excellent PAE in low and mid power ranges.
• Low quiescent current in low power mode
• Excellent average power consumption and talk-time
• Spectral linearity supporting HSDPA, HSUPA, HSPA+,
and LTE
• Internally matched RF input & output ports
• Internal RF input & output DC blocking capacitors
• Internal Vcc1 & Vcc2 bypass capacitors
• Internal Vref eliminating external LDO regulators and switches
• 1.8V CMOS compatible control logics VH=1.35V~3.1V
• 3x4x0.9mm 16-pad leadless surface-mount package
• Lead-free, RoHS compliant, Halogen-free, Sb-free, Green
• UMTS B2 & B5 , and LTE B5 & B2/B25 multimode dual band handsets, Wireless USB data card dongles and embedded data cards.
Ordering Information

Part Number of Devices

ACPM-920502-LT1
1000

Container Tape & Reel 7”

The ACPM-920502 is manufactured on an advanced InGaP/GaAs HBT technology that provides excellent performance, temperature stability, ruggedness, and reliability.

This preliminary data is provided to assist you in the evaluation of product s currently under development. Until Avago Technologies releases this product for general sales, Avago Technologies reserves the right to alter prices, specifications, features, capabilities, functions, release dates, and remove availability of the product s at anytime.

Confidential

Absolute Maximum Ratings
- Stresses in excess of the absolute ratings may cause permanent damage. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Functional operation is not implied under these conditions.

Condition

Min Nominal Max

Unit Associated Pins

DC Supply Voltage Vcc RF Off, RF On,

Enable Control Voltage Ven_LB, Ven_HB

V Vcc1, Vcc2

V Vcc1, Vcc2

V Ven_LB, Ven_HB

Mode Control Voltage Vmode

V Vmode

RF Input Power Pin
dBm RFin_LB, RFin_HB

Storage Temperature Tstg
+125

No damage assuming only one parameter is set at limit at a time with all other parameters set at or below nominal value

Recommended Operating Condition

Nominal

Unit

DC Supply Voltage

VCC1

VCC2

Enable Control Voltage Ven_LB, Ven_HB

VLOW

VHIGH

Enable Control Current Ien_LB, Ien_HB

Mode Control Voltage Vmode

VLOW

VHIGH

Mode Control Current Imode

Operating Frequency fc

LB UMTS / LTE
More datasheets: MJS 750 | MJS 1 | MJS 1.25 | MJS 1.5 | MJS 2 | MJS 2.5 | MJS 3 | MJS 350 | MJS 7 | MJS 6


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ACPM-920502-LT1 Datasheet file may be downloaded here without warranties.

Datasheet ID: ACPM-920502-LT1 519903