HM-H110APWR1-5CP1-TG30L

HM-H110APWR1-5CP1-TG30L Datasheet


Part Datasheet
HM-H110APWR1-5CP1-TG30L HM-H110APWR1-5CP1-TG30L HM-H110APWR1-5CP1-TG30L (pdf)
Related Parts Information
HM-H110APWR1-5CP1-TG30 HM-H110APWR1-5CP1-TG30 HM-H110APWR1-5CP1-TG30
PDF Datasheet Preview
3M MetPak HM Power Header
2 mm Type A, 110/44/4 Signal/Ground/Power Contacts, 5 Rows, Straight HM Series
• Modular/scalable format IEC 61076-4-101
• Press-fit or solder tail version
• 63 mated lines per linear inch
• Four integrated A power blades
• Ships with protective cap, which also serves as an
insertion tool
• End-to-end stackable with 5 row 3M MetPak

CP2, HM and HSHM products
• See Regulatory Information Appendix RIA
for chemical compliance information

Date Modified April 4, 2007

TS-2089-02 Sheet 1 of 3

Physical

Insulation Material High Temperature Thermoplastic LCP

Flammability UL 94V-0 Contact
Material Copper Alloy Plating See Ordering Information

Performance

Mechanical

Normal Force Nominal N [58 g] Signal, N [100 g] Power

Engagement Force Nominal N [33 g] Signal, N [145 g] Power

Separation Force Nominal N [20 g] Signal, N [91 g] Power

Wipe Nominal, Shortest Contact mm in] Signal, mm in] Power

Durability 250 cycles with TR40B plating Lubricated

Application:

This module is suitable for stand-alone use with pin lengths up to mm. Limited capture of mm in longitudinal and mm in transverse directions.

Electrical

Current Rating Fully Loaded 1 A at 70qC Signal, A 70qC Power

Insulation Resistance 1 x 104 M at 100 VDC Withstanding Voltage 750 VRMS

Environmental

Temperature Rating -55qC to +125qC Process Rating Maximum 260°C per J-STD-020C

Moisture Sensitivity Level 1 per J-STD-020C

UL File No. E68080
3M Interconnect Solutions

MetPak is a trademark of 3M Company.
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M MetPak HM Power Header
2 mm Type A, 110/44/4 Signal/Ground/Power Contacts, 5 Rows, Straight HM Series

SIGNAL CONTACTS

GROUND PINS DIM "A"

Pin positions
1 2 3 4 5 6 7 8 9 10 11 P1 P2 15 16 17 18 19 20 21 22 23 24 25

ROW F ROW E ROW D ROW C ROW B ROW A ROW Z

P3 P4

DIM "B"

DIM A = Pin mating length DIM B = Tail length

This view shown with protective caps*
[inch]

Tolerance Unless Noted
mm ±3
[ ] Dimensions for Reference Only
Ordering Information

HM - H110APWR1 - 5CX1 - HM - H154APWR2 - 5BX1 -

Tail Style P = Press-fit tail S = Solder tail

Plating Options See Plating Chart

Standard Configuration DIM A = mm for rows A through E DIM B = mm

For non-standard configurations contact sales representative.

TS-2089-02 Sheet 2 of 3
3M Interconnect Solutions
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M MetPak HM Power Header
2 mm Type A, 110/44/4 Signal/Ground/Power Contacts, 5 Rows, Straight HM Series
1 2 X O D IM D l O 0 M A B

P la te d th ru h o le s
25 24 23 22 21 20 19
4 8 0 18 17 16 15
2 X 2 0
11 10 9 8 7 6 5 4 3 2 1 F EDCB A Z
2 3 0 2 0
8 X 1 0

FINISHED HO LE DIA. "D"

R eHcOo mLEmPeLnAdTeIdNGP CTAB BhLoEle m o u n t in g p a t e r n

C u THIC KNESS

SnPb THIC KNESS

DRILLED HO LE DIA.

Plating Suffix TG30

TR40B

Press-Fit Terminations RIA E2 & C2 apply

RIA E2 & C2 apply

Plating Chart Solder Tail Terminations

Plating Composition
um [30 u"] Min. Au Contact Area RIA E3 & C2 apply um [100 u"] Min. SnPb Tail Area
um [50 u"] Min. Ni all over

RIA E3 & C2 apply
um [5 u"] Min. Hard Au over um [40 u"] Min. Pd/Ni over um [4 u"] Min. Pd Strike Contact Area um [100u"] Min SnPb Terminal Area um [50 u"] Min. Ni all over Lubricated Contact Area

TS-2089-02 Sheet 3 of 3
3M Interconnect Solutions
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373

Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect

EUROPE

Appendix E1 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E2 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E3 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E4 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/17/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

RIA-2217-B

CHINA

Appendix C1 China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix C2 China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below.

Name and Content of Hazardous Substances or Elements

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.

Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture for a period of one 1 year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.

Electronic Solutions Division
6801 River Place Blvd. Austin, TX 78726-9000 800/225-5373

RIA-2217-B 3M 2007
More datasheets: 2733 | FAN5066MX | FAN5066M | TSL1412S | FQB20N06TM | FR107-T | FR106-T | DUSBULC6-CSP4-7 | 1533UYD/S530-A3 | TR2/1025FA500MA


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HM-H110APWR1-5CP1-TG30L Datasheet file may be downloaded here without warranties.

Datasheet ID: HM-H110APWR1-5CP1-TG30L 520379