TSL1412S

TSL1412S Datasheet

TSL1412S

Part	Datasheet
TSL1412S	TSL1412S (pdf)

PDF Datasheet Preview
TSL1412S 1536 x 1 LINEAR SENSOR ARRAY WITH HOLD r TAOS045F − APRIL 2007 D 1536 x 1 Sensor-Element Organization D 400 Dot-Per-Inch DPI Sensor Pitch D High Linearity and Uniformity D Wide Dynamic Range 4000:1 72 dB D Output Referenced to Ground D Low Image Lag Typ D Operation to 8 MHz D Single 3-V to 5-V Supply D Rail-to-Rail Output Swing AO D No External Load Resistor Required The TSL1412S linear sensor array consists of 2 sections of 768 photodiodes, each with associated charge amplifier circuitry, aligned to form a contiguous 1536 x 1 pixel array. The device incorporates a pixel data-hold function that provides simultaneous-integration start and stop times for all pixels. The pixels measure um by um with 63.5-um center-to-center spacing and 8-um spacing between pixels. Operation is simplified by internal logic that requires only a serial-input SI pulse and a clock. TOP VIEW 1 VPP 2 SI1 3 HOLD1 4 CLK1 5 GND 6 AO1 7 SO1 8 SI2 9 HOLD2 10 CLK2 11 SO2 12 AO2 13 VDD The device is intended for use in a wide variety of applications including mark and code reading, OCR and contact imaging, edge detection and positioning, and optical encoding. Functional Block Diagram each section Pixel 1 769 1 Integrator S1 2 Reset Sample/Hold/ Output Pixel 2 Pixel 3 3, 9 Hold Hold Switch Control Logic Pixel 768 1536 Analog Bus Output Buffer Q768 Q1536 Gain Trim 13 VDD 6, 12 AO 5 GND 7, 11 4, 10 CLK 2, 8 SI 768-Bit Shift Register 2 each The LUMENOLOGY r Company Texas Advanced Optoelectronic Solutions Inc. 1001 Klein Road S Suite 300 S Plano, TX 75074 S 972r 673-0759 Copyright E 2007, TAOS Inc. 1 TSL1412S 1536 x 1 LINEAR SENSOR ARRAY WITH HOLD TAOS045F − APRIL 2007 Terminal Functions TERMINAL NAME NO. CLK1 CLK2 HOLD1 HOLD2 O Analog output, section

PDF Datasheet Preview

TSL1412S
1536 x 1 LINEAR SENSOR ARRAY WITH HOLD
r TAOS045F − APRIL 2007

D 1536 x 1 Sensor-Element Organization D 400 Dot-Per-Inch DPI Sensor Pitch D High Linearity and Uniformity D Wide Dynamic Range 4000:1 72 dB D Output Referenced to Ground D Low Image Lag Typ D Operation to 8 MHz D Single 3-V to 5-V Supply D Rail-to-Rail Output Swing AO D No External Load Resistor Required

The TSL1412S linear sensor array consists of 2 sections of 768 photodiodes, each with associated charge amplifier circuitry, aligned to form a contiguous 1536 x 1 pixel array. The device incorporates a pixel data-hold function that provides simultaneous-integration start and stop times for all pixels. The pixels measure um by um with 63.5-um center-to-center spacing and 8-um spacing between pixels. Operation is simplified by internal logic that requires only a serial-input SI pulse and a clock.

TOP VIEW
1 VPP 2 SI1 3 HOLD1 4 CLK1 5 GND 6 AO1 7 SO1 8 SI2 9 HOLD2 10 CLK2 11 SO2 12 AO2 13 VDD

The device is intended for use in a wide variety of applications including mark and code reading, OCR and contact imaging, edge detection and positioning, and optical encoding.

Functional Block Diagram each section

Pixel 1 769
1 Integrator S1 2 Reset

Sample/Hold/ Output

Pixel 2

Pixel 3
3, 9 Hold

Hold

Switch Control Logic

Pixel 768 1536

Analog Bus

Output Buffer

Q768 Q1536

Gain Trim
13 VDD 6, 12 AO
5 GND 7, 11
4, 10 CLK
2, 8 SI
768-Bit Shift Register 2 each

The LUMENOLOGY r Company

Texas Advanced Optoelectronic Solutions Inc.
1001 Klein Road S Suite 300 S Plano, TX 75074 S 972r 673-0759

Copyright E 2007, TAOS Inc. 1

TSL1412S 1536 x 1 LINEAR SENSOR ARRAY WITH HOLD

TAOS045F − APRIL 2007

Terminal Functions

TERMINAL

NAME NO.

CLK1

CLK2

HOLD1

HOLD2

O Analog output, section

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived TSL1412S Datasheet file may be downloaded here without warranties.

Datasheet ID: TSL1412S 519823