TR2/1025FA500MA

TR2/1025FA500MA Datasheet

Packaging Code SP1 TR2

Part	Datasheet
TR2/1025FA500MA	TR2/1025FA500MA (pdf)

PDF Datasheet Preview
Brick Fuses 1025FA Series, Fast Acting • Surface Mount • Environmentally rugged, satisfies the EIA/IS-722 Standard • Solder Immersion Compatible • Targeted for Consumer Electronics ELECTRICAL CHARACTERISTICS % of Amp Rating Opening Time 100% 4 Hours Minimum 200% 250mA-5A 5 Seconds Maximum 250% 250mA-5A fuse 1 Second Maximum 200% 7A-15A fuse 20 Seconds Maximum 250% 7A-15A fuse 4 Seconds Maximum Note 30vde constant current source required for 200% overload tests on 250ma-1a. Agency Information • UL Recognition Guide & File numbers JDYX2 & E19180 250mA - 15A • CSA Component Acceptance File # 053787 C000, Class # 1422 30 Environmental Data • Life Test MIL-STD-202, Method 108A, Test Condition D • Load Humidity MIL-STD-202, Method 103B • Moisture Resistance MIL-STD-202, Method 106E • Terminal Strength MIL-STD-202, Method 211A • Thermal Shock MIL-STD-202, Method 107D, air-to-air • Case Resistance EIA/IS-722 • Resistance to Dissolution of Metallization: ANSI J-STD-002, Test D • Mechanical Shock MIL-STD-202, Method 213B with exceptions per EIA/IS-722 Standard • High Frequency Vibration MIL-STD-202, Method 204D, Test Condition D • Resistance to Solvents MIL-STD-202, Method 215A Dimensions inches Drawing Not to Scale Land Pattern Soldering Method • Wave Solder 260°C, 10 sec max. • Infrared Reflow 260°C, 30 sec max. Ordering • Specify product code and packaging code Product Code 1025FA250mA 1025FA500mA 1025FA750mA 1025FA1A 1025FA1.5A 1025FA2A 1025FA2.5A 1025FA3A 1025FA3.5A 1025FA4A 1025FA5A 1025FA7A 1025FA10A 1025FA12A 1025FA15A Voltage Rating AC DC 250V 125V 250V 125V 250V 125V 250V 125V 250V 125V 250V 125V 250V 125V 250V 125V 250V 125V 250V 125V 250V 125V 250V 60V 250V 60V 250V 60V 250V 60V SPECIFICATIONS Interrupting DC Cold Rating* Resistance** ohms 250VAC 125VDC 60VDC Typical Typical Melting I2t† 138 457 498 1451 Typical Voltage 2019 mV 1500 mV 880 mV 560 mV 260 mV 258 mV 232 mV 205 mV 185 mV 190 mV 180 mV 150 mV 146 mV 120 mV 110 mV Marking 1st & 2nd 3rd * AC Interrupting Rating Measured at designated voltage, 100% power factor random closing DC Interrupting Rating Measured at designated voltage, time constant of less than 50 microseconds, battery source ** DC Cold Resistance Measured at of rated current † Typical Melting I2t Measured with a battery bank at rated DC voltage, 10x-rated current, but not exceeding the interrupting rating. Time constant of calibrated circuit less than 50 microseconds . Test current not to exceed interrupting rating of 50A. Typical Voltage Drop Measured at rated current after temperature stabilizes Marking Code - 3rd U = USA, T = Taiwan and S = China • Device designed to carry rated current for four hours minimum. An operating current of 80% or less of rated current is recommended, with further derating required at elevated ambient temperatures. Brick Fuses 1025FA Series, Fast Acting TIME CURRENT CURVE Packaging Code SP1 TR2 PACKAGING CODE Description 50 piece sample 2,500 pieces of fuses on 24mm tape-and-reel on 13 inch 330mm reel per EIA Standard 481 Cooper Electronic Technologies 2003 Visit us on the Web at 3601 Quantum Boulevard Boynton Beach, Florida 33426-8638 Tel +1-561-752-5000 Toll Free +1-888-414-2645 Fax +1-561-742-1178 This bulletin is intended to present product design solutions and technical information that will help the end user with design applications. Cooper Electronic Technologies reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper Electronic Technologies also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.

PDF Datasheet Preview

Brick Fuses
1025FA Series, Fast Acting
• Surface Mount
• Environmentally rugged, satisfies the EIA/IS-722

Standard
• Solder Immersion Compatible
• Targeted for Consumer Electronics

ELECTRICAL CHARACTERISTICS
% of Amp Rating

Opening Time
100%
4 Hours Minimum
200% 250mA-5A
5 Seconds Maximum
250% 250mA-5A fuse
1 Second Maximum
200% 7A-15A fuse
20 Seconds Maximum
250% 7A-15A fuse
4 Seconds Maximum

Note 30vde constant current source required for 200% overload tests on 250ma-1a.

Agency Information
• UL Recognition Guide & File numbers JDYX2 & E19180 250mA - 15A
• CSA Component Acceptance File # 053787 C000, Class # 1422 30

Environmental Data
• Life Test MIL-STD-202, Method 108A, Test Condition D
• Load Humidity MIL-STD-202, Method 103B
• Moisture Resistance MIL-STD-202, Method 106E
• Terminal Strength MIL-STD-202, Method 211A
• Thermal Shock MIL-STD-202, Method 107D, air-to-air
• Case Resistance EIA/IS-722
• Resistance to Dissolution of Metallization:

ANSI J-STD-002, Test D
• Mechanical Shock MIL-STD-202, Method 213B with
exceptions per EIA/IS-722 Standard
• High Frequency Vibration MIL-STD-202, Method 204D,

Test Condition D
• Resistance to Solvents MIL-STD-202, Method 215A

Dimensions
inches

Drawing Not to Scale

Land Pattern
Soldering Method
• Wave Solder 260°C, 10 sec max.
• Infrared Reflow 260°C, 30 sec max. Ordering
• Specify product code and packaging code

Product Code
1025FA250mA 1025FA500mA 1025FA750mA 1025FA1A 1025FA1.5A 1025FA2A 1025FA2.5A 1025FA3A 1025FA3.5A 1025FA4A 1025FA5A 1025FA7A 1025FA10A 1025FA12A 1025FA15A

Voltage Rating AC DC 250V 125V 250V 125V 250V 125V 250V 125V 250V 125V 250V 125V 250V 125V 250V 125V 250V 125V 250V 125V 250V 125V 250V 60V 250V 60V 250V 60V 250V 60V

SPECIFICATIONS

Interrupting

DC Cold

Rating*

Resistance** ohms
250VAC 125VDC 60VDC

Typical

Typical Melting

I2t†
138 457 498 1451

Typical Voltage 2019 mV 1500 mV 880 mV 560 mV 260 mV 258 mV 232 mV 205 mV 185 mV 190 mV 180 mV 150 mV 146 mV 120 mV 110 mV

Marking
1st & 2nd 3rd
* AC Interrupting Rating Measured at designated voltage, 100% power factor random closing DC Interrupting Rating Measured at designated voltage, time constant of less than 50 microseconds, battery source
** DC Cold Resistance Measured at of rated current † Typical Melting I2t Measured with a battery bank at rated DC voltage, 10x-rated current, but not exceeding the interrupting rating. Time constant of calibrated circuit less
than 50 microseconds . Test current not to exceed interrupting rating of 50A. Typical Voltage Drop Measured at rated current after temperature stabilizes Marking Code - 3rd U = USA, T = Taiwan and S = China
• Device designed to carry rated current for four hours minimum. An operating current of 80% or less of rated current is recommended, with further derating required at
elevated ambient temperatures.

Brick Fuses
1025FA Series, Fast Acting

TIME CURRENT CURVE

Packaging Code SP1 TR2

PACKAGING CODE

Description 50 piece sample 2,500 pieces of fuses on 24mm tape-and-reel on 13 inch 330mm reel per EIA Standard 481

Cooper Electronic Technologies 2003

Visit us on the Web at
3601 Quantum Boulevard Boynton Beach, Florida 33426-8638 Tel +1-561-752-5000 Toll Free +1-888-414-2645 Fax +1-561-742-1178

This bulletin is intended to present product design solutions and technical information that will help the end user with design applications. Cooper Electronic Technologies reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper Electronic Technologies also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived TR2/1025FA500MA Datasheet file may be downloaded here without warranties.

Datasheet ID: TR2/1025FA500MA 506740