HDC-H160-41P2-GG30

HDC-H160-41P2-GG30 Datasheet


3M HDC Header

Part Datasheet
HDC-H160-41P2-GG30 HDC-H160-41P2-GG30 HDC-H160-41P2-GG30 (pdf)
Related Parts Information
HDC-H348-32S1-TG30 HDC-H348-32S1-TG30 HDC-H348-32S1-TG30
HDC-H165-31S1-TR HDC-H165-31S1-TR HDC-H165-31S1-TR
HDC-H180-41S1-TR HDC-H180-41S1-TR HDC-H180-41S1-TR
PDF Datasheet Preview
3M HDC Header

Vertical Mount, PCB/Backplane, Solder Tail or Press-Fit

HDC Series
• High density, up to 240 contacts single bay and 366 contacts dual bay
• Early Mate Late Break EMLB grounding contacts for hot swapping
• Mates with three-row and four-row sockets
• See Regulatory Information Appendix RIA for chemical compliance information

Physical

Date Modified March 25,

Insulation Material Glass Filled Thermoplastic LCP

Flammability UL 94V-0 Color Black
Contact Material Copper Alloy Plating Underplating 50 u” [ um ] min. Nickel Wiping Area See Ordering Information Termination Area See Ordering Information Marking Part Number and Date Code

TS-1136-C Sheet 1 of 7

Electrical

Current Rating A Insulation Resistance 1 x 103 M Ω min. at 500 VDC Withstanding Voltage 900 VAC for 1 minute

Environmental

Temperature Rating -55°C to +105°C Process Rating Maximum 260°C per J-STD-020C

Moisture Sensitivity Level 1 per J-STD-020C

UL File No. E68080

Electronic Solutions Division Interconnect Solutions
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M HDC Header

Vertical Mount, PCB/Backplane, Solder Tail or Press-Fit
3-Row Single Bay

ROW C ROW B ROW A

SOLDER TAIL PRESS-FIT TAIL

HDC Series

PIN #1

SECTION Z-Z

ROW C ROW B ROW A

Inch [m ]

Tolerance Unless Noted
inch [ ] Dim ensions for R eference

O nly

O.037 - PLATED-THRU HOLE, PRESS-FIT

O PLATED-THRU HOLE, SOLDER TAIL l O A B

Body footprint -B-

TYP.

RECOMMENDED P.C.B. HOLE PATTERN

O 2 Plcs. TYP.

PIN #1

Electronic Solutions Division Interconnect Solutions

TS-1136-C Sheet 2 of 7
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M HDC Header

Vertical Mount, PCB/Backplane, Solder Tail or Press-Fit

HDC Series

Product Table/Dimensions for 3 Row, Single Bay

Pin Quantity

HDC-H045-31XX-XXXX

HDC-H072-31XX-XXXX

HDC-H075-31XX-XXXX

HDC-H090-31XX-XXXX

HDC-H096-31XX-XXXX

HDC-H102-31XX-XXXX

HDC-H120-31XX-XXXX

HDC-H135-31XX-XXXX

Description HDC-H150-31XX-XXXX HDC-H165-31XX-XXXX HDC-H180-31XX-XXXX HDC-H195-31XX-XXXX HDC-H210-31XX-XXXX HDC-H225-31XX-XXXX HDC-H228-31XX-XXXX HDC-H240-31XX-XXXX

Pin Quantity
150 165 180 195 210 225 228 240

Plating Description
Ordering Information

HDC - HXXX - XXXX - XXXX

Pin Quantity See Table

Row Options 3 = 3 Rows 4 = 4 Rows

Plating Options See Plating

Chart

Insulator Options 1 = Single bay
insulator 2 = Dual bay
insulator

Termination Style / Lead length - Dim. F P1 - Press-fit / P2 - Press-fit / S1 - Solder Tail /

Electronic Solutions Division Interconnect Solutions

Plating Suffix

TR TG30

Plating Suffix GG30

Plating Chart S1 & P1 Termination Styles ONLY

Press-Fit Terminations

RIA E2 & C2 apply

RIA E2 & C2 apply

RIA E1 & C1 apply

RIA E1 & C1 apply

Solder Tail Terminations

RIA E3 & C2 apply

RIA E3 & C2 apply

RIA E1 & C1 apply

RIA E1 & C1 apply

Plating composition
3 u” um] Min. Au over 7 u” um] PdNi area 1 100 u” um] Min. Tin Lead area 4 50 u” um] Min. Ni all over
30 u” um] Min. Au Area 1 100 u” um] Min. Tin Lead Tail Area 4 50 u” um] Min. Ni all over
3 u” um] Min Au on Area 1 7 u” um] PdNi on area 1 100 u” um] Min. Whisker Mitigating Matte Tin on Area 4 50 u” um] Min. Ni all over
30 u” um] Min. Au on Area 1 100 u” um] Min. Whisker Mitigating Matte Tin on Area 4 50 u” um] Min. Ni all over

Plating Chart P2 Termination Styles ONLY

Press-Fit Terminations

RIA E2 & C2 apply

RIA E2 & C2 apply

Solder Tail Terminations

RIA E3 & C2 apply

RIA E3 & C2 apply

Plating composition
30 u” um] Min. Au on area 1 10 u” um] Min. Au on area 2 100 u” um] Min Tin Lead on area 3 50 u” um] Ni all over
30 u” um] Min. Au on area 1 10 u” um] Min. Au on area 2 100 u” um] Min Tin Lead on area 3 50 u” um] Ni all over

TS-1136-C Sheet 3 of 7
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M HDC Header

Vertical Mount, PCB/Backplane, Solder Tail or Press-Fit

HDC Series

Inch [mm] Tolerance Unless Noted Inch [ ] Dimensions for Reference only

Product Table/Dimensions for 3 Row, Dual Bay

Pin Quantity

HDC-H228-32XX-XXXX

HDC-H240-32XX-XXXX

HDC-H258-32XX-XXXX

HDC-H276-32XX-XXXX

HDC-H294-32XX-XXXX

HDC-H312-32XX-XXXX

HDC-H330-32XX-XXXX

HDC-H348-32XX-XXXX

HDC-H366-32XX-XXXX

Electronic Solutions Division Interconnect Solutions

TS-1136-C Sheet 4 of 7
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M HDC Header

Vertical Mount, PCB/Backplane, Solder Tail or Press-Fit
4-Row Single Bay

HDC Series

Electronic Solutions Division Interconnect Solutions

TS-1136-C Sheet 5 of 7
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M HDC Header

Vertical Mount, PCB/Backplane, Solder Tail or Press-Fit

Product Table/Dimensions for 4-Row, Single Bay

Pin Quantity

HDC-H060-41XX-XXXX

HDC-H076-41XX-XXXX

HDC-H080-41XX-XXXX

HDC-H100-41XX-XXXX

HDC-H120-41XX-XXXX

HDC-H128-41XX-XXXX

HDC-H140-41XX-XXXX

HDC-H160-41XX-XXXX

HDC-H168-41XX-XXXX

HDC-H180-41XX-XXXX

HDC-H200-41XX-XXXX

HDC-H216-41XX-XXXX

HDC-H220-41XX-XXXX

HDC-H240-41XX-XXXX

HDC-H260-41XX-XXXX

HDC-H280-41XX-XXXX

HDC-H300-41XX-XXXX

HDC-H320-41XX-XXXX

HDC Series

Description HDC-H320-42XX-XXXX HDC-H344-42XX-XXXX HDC-H352-42XX-XXXX HDC-H360-42XX-XXXX HDC-H368-42XX-XXXX HDC-H392-42XX-XXXX HDC-H416-42XX-XXXX HDC-H440-42XX-XXXX HDC-H464-42XX-XXXX HDC-H488-42XX-XXXX

Product Table/Dimensions for 4-Row, Dual Bay

Pin Quantity 320 344 352 360 368 392 416 440 464 488

Electronic Solutions Division Interconnect Solutions

TS-1136-C Sheet 6 of 7
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M HDC Header

Vertical Mount, PCB/Backplane, Solder Tail or Press-Fit
4-Row Dual Bay

HDC Series

Electronic Solutions Division Interconnect Solutions

TS-1136-C Sheet 7 of 7
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373

Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect

EUROPE Appendix E1 European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E2 European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E3 European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E4 European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/717/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below.

RIA-2217A-D

Appendix E5 European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC.

This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive.
“RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

CHINA Appendix C1 China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix C2 China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below.

RIA-2217A-D

Appendix C3 China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below.

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized of 3M.

Warranty Limited Remedy Limited Liability.

This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
3M Electronic Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373

Please recycle. Printed in USA. 3M All rights reserved. RIA-2217A-D
3M is a trademark of 3M Company.
More datasheets: 74F151ASCX | CY7C1514JV18-250BZXC | CY7C1525JV18-250BZXC | CY7C1525JV18-250BZC | AMB1926 | MSA-0300-GP4 | FIT0486 | HDC-H348-32S1-TG30 | HDC-H165-31S1-TR | HDC-H180-41S1-TR


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HDC-H160-41P2-GG30 Datasheet file may be downloaded here without warranties.

Datasheet ID: HDC-H160-41P2-GG30 520315