DDM-09P-209G-TR
DDM-09P-209G-TR Datasheet
DDM Series
| Part | Datasheet |
|---|---|
DDM-09P-209G-TR |
DDM-09P-209G-TR (pdf) |
| Related Parts | Information |
|---|---|
DDM-37P-137G-TG30 |
DDM-37P-137G-TG30 |
| PDF Datasheet Preview |
|---|
| D Sub Plug Connector, Discrete Wire Termination DDM Series S IDC contact with integral wire strain relief S #20-30 AWG discrete wire capability S Tin plated steel shells for electrical grounding and shielding capability Date Modified February 11, 2002 TS-1057-01 Sheet 1 of 3 Physical Insulation Material Thermoplastic Glass Filled Polyester Flammability UL 94V-0 Color Black Contact Material Copper Alloy Plating Underplate 50 µm Nickel QQ-N-290, Class 2 Wiping Area Gold MIL-G-45204, Type II, Grade C See ordering information Shell Material Steel Plating Tin Wire Accommodation See ordering Information Marking Contact Position Numbers Electrical Current Rating 20 Amps / 22 Amps 24 Amps / 26 Amps 28 Amps / 30 Amps Insulation Resistance > 1 x 109 at 500 VDC Withstanding Voltage 1000 Vrms at Sea Level Cable Rating 115°C minimum Cable Rating 80°C minimum Cable Rating 80°C minimum Environmental Temperature Rating to +105° UL File No. E68080 3M Interconnect Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 For technical, sales or ordering information call 800-225-5373 D Sub Plug Connector, Discrete Wire Termination Contact Quantity 09 15 25 37 Dimensions C Ref [ ] Ref [ ] DDM Series Typ [ ] Inch [mm] Tolerance Unless Noted Inch ± ± ± [ ] Dimensions for Reference only Ordering Information Contact Quantity DDM-XXP-XXXG-XXXX Wire Gauge Range 1 = 24-30 AWG 2 = 20-22 AWG Contact Quantity See table Plating Code TG30 = Gold TR = Gold Last two digits leave blank in ordering number TS-1057-01 Sheet 2 of 3 3M Interconnect Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 For technical, sales or ordering information call 800-225-5373 D Sub Plug Connector, Discrete Wire Termination Mounting Contact Method* Quantity 15 Front 15 Rear Dimensions * Front connector is mounted in front of the panel. Rear connector is mounted behind the panel. R Max. Typ [ ] Panel Cutout A1 Full Radius Alternate GI Radius DDM Series G1 [ ] 10° 0° Typ F1 E1 Tooling required to assemble the DDM socket and Plug connector Bench Termination Method Manual Arbor Press CT-20 Tooling Nest DDM-MTT-1 Platten DDM-MTT-1P Hand Termination Method Ratcheting hand tool DDM-HTT-R1 3M Interconnect Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 TS-1057-01 Sheet 3 of 3 For technical, sales or ordering information call 800-225-5373 |
| More datasheets: 05041A120KA79A | 05045C272KAT1A | 05041A121KA79A | 05041A101KA79A | 05041A820KA79A | 05045C103JA19A | 05045C821KAT1A | 644260000 | FDP15N50 | FDH15N50 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DDM-09P-209G-TR Datasheet file may be downloaded here without warranties.