6811-3/4"X72YD

6811-3/4"X72YD Datasheet

6811

Part	Datasheet
6811-3/4"X72YD	6811-3/4"X72YD (pdf)

Related Parts	Information
6811-1"X72YD	6811-1"X72YD
6811-1/2"X72YD	6811-1/2"X72YD
6811-1.5"X72YD	6811-1.5"X72YD

PDF Datasheet Preview
Transparent Film Tape 6811 Technical Data April, 2003 Product Description Transparent Film Tape 6811 is excellent for various packaging applications. It has a synthetic rubber adhesive system, which provides long aging properties. Construction Backing 3M Paklon film Adhesive Pressure sensitive rubber resin Colors Transparent Typical Physical Properties Note The following technical information and data should be considered representative or typical only, and should not be used for specification purposes. ASTM Test Method Adhesion to Steel: 50 oz./in. width 55 N/100 mm width D-3330 Longitudinal Tensile Strength 30 lbs./in. 525 N/100 mm width D-3759 Elongation at Break: D-3759 Tape Thickness - Backing Total: mil mm mil mm D-3652 D-3652 Features Available Sizes • Moisture- and chemical-resistant. • Roll stability. • Good dispensing properties. • Superior adhesion. • Removes cleanly. • General sealing. • Holding and attaching. • Combining small packages. • Closing poly bags. • Attaching tubes to canisters. • Small L-Clips. Standard Widths Available by Special Order: Core Size ID Lengths: 3/8 in., 1/2 in., 3/4 in., 1 in., 11/2 in. Custom widths and lengths available on request, subject to minimum order requirements. 3 in. 72 yds., bulk only Transparent Film Tape 6811 For Additional Information To request additional product information or to arrange for sales assistance, call toll free 1-800-362-3550 or visit Address correspondence to 3M Industrial Adhesives and Tapes Division, Building 21-1W-10, 900 Bush Avenue, St. Paul, MN Our fax number is In Canada, phone In Puerto Rico, phone In Mexico, phone: Important Notice 3M MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user’s application. Please remember that many factors can affect the use and performance of a 3M product in a particular application. The materials to be bonded with the product, the surface preparation of those materials, the product selected for use, the conditions in which the product is used, and the time and environmental conditions in which the product is expected to perform are among the many factors that can affect the use and performance of a 3M product. Given the variety of factors that can affect the use and performance of a 3M product, some of which are uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user’s application. Limitation of Remedies and Liability If the 3M product is proved to be defective, THE EXCLUSIVE REMEDY, AT 3M’S OPTION, SHALL BE TO REFUND THE PURCHASE PRICE OF OR TO REPAIR OR REPLACE THE DEFECTIVE 3M PRODUCT. 3M shall not otherwise be liable for loss or damages, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including, but not limited to, contract, negligence, warranty, or strict liability. ISO 9002

PDF Datasheet Preview

Transparent Film Tape
6811

Technical Data

April, 2003

Product Description

Transparent Film Tape 6811 is excellent for various packaging applications. It has a synthetic rubber adhesive system, which provides long aging properties.

Construction

Backing 3M Paklon film

Adhesive Pressure sensitive rubber resin

Colors Transparent

Typical Physical Properties

Note The following technical information and data should be considered representative or typical only, and should not be used for specification purposes.

ASTM Test Method

Adhesion to Steel:
50 oz./in. width 55 N/100 mm width

D-3330

Longitudinal Tensile Strength 30 lbs./in. 525 N/100 mm width

D-3759

Elongation at Break:

D-3759

Tape Thickness - Backing Total:
mil mm mil mm

D-3652 D-3652

Features Available Sizes
• Moisture- and chemical-resistant.
• Roll stability.
• Good dispensing properties.
• Superior adhesion.
• Removes cleanly.
• General sealing.
• Holding and attaching.
• Combining small packages.
• Closing poly bags.
• Attaching tubes to canisters.
• Small L-Clips.

Standard Widths Available by Special Order:

Core Size ID Lengths:
3/8 in., 1/2 in., 3/4 in., 1 in., 11/2 in.

Custom widths and lengths available on request, subject to minimum order requirements.
3 in.
72 yds., bulk only

Transparent Film Tape
6811

For Additional Information

To request additional product information or to arrange for sales assistance, call toll free 1-800-362-3550 or visit Address correspondence to 3M Industrial Adhesives and Tapes Division, Building 21-1W-10, 900 Bush Avenue, St. Paul, MN Our fax number is In Canada, phone In Puerto Rico, phone In Mexico, phone:

Important Notice
3M MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user’s application. Please remember that many factors can affect the use and performance of a 3M product in a particular application. The materials to be bonded with the product, the surface preparation of those materials, the product selected for use, the conditions in which the product is used, and the time and environmental conditions in which the product is expected to perform are among the many factors that can affect the use and performance of a 3M product. Given the variety of factors that can affect the use and performance of a 3M product, some of which are uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user’s application.

Limitation of Remedies and Liability

If the 3M product is proved to be defective, THE EXCLUSIVE REMEDY, AT 3M’S OPTION, SHALL BE TO REFUND THE PURCHASE PRICE OF OR TO REPAIR OR REPLACE THE DEFECTIVE 3M PRODUCT. 3M shall not otherwise be liable for loss or damages, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including, but not limited to, contract, negligence, warranty, or strict liability.

ISO 9002

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 6811-3/4"X72YD Datasheet file may be downloaded here without warranties.

Datasheet ID: 6811-3/4"X72YD 518396