G3G146-AB72-01

G3G146-AB72-01 Datasheet


G3G146-AB72-01

Part Datasheet
G3G146-AB72-01 G3G146-AB72-01 G3G146-AB72-01 (pdf)
PDF Datasheet Preview
G3G146-AB72-01

EC centrifugal fan
forward curved, single inlet with housing flange
ebm-papst Mulfingen GmbH & Co. KG Bachmühle 2
• D-74673 Mulfingen Phone +49 7938 81-0 Fax +49 7938 81-110

Limited partnership
• Headquarters Mulfingen County court Stuttgart
• HRA 590344

General partner Elektrobau Mulfingen GmbH
• Headquarters Mulfingen County court Stuttgart
• HRB 590142

Nominal data

Type Motor

G3G146-AB72-01 M3G074-CF

Phase Nominal voltage Frequency
1~ VAC 115 Hz 50/60

Type of data definition

State
prelim.

Speed
min-1 2390

Power input

Current draw

Min. back pressure

Min. ambient temperature °C -25

Max. ambient temperature °C 60
ml = max. load
• me = max. efficiency
• fa = running at free air
• cs = customer specs
• cu = customer unit Subject to alterations

G3G146-AB72-01

EC centrifugal fan
forward curved, single inlet with housing flange

Technical features

Mass Size Material of electronics housing Material of impeller Housing material Direction of rotation Type of protection Insulation class Humidity class Max. permissible ambient motor temp. transp./ storage Min. permissible ambient motor temp. transp./storage Mounting position Condensate discharge holes Operation mode Motor bearing Technical features

EMC interference immunity EMC interference emission Touch current acc. IEC 60990 measuring network Fig. 4, TN system Motor protection Cable exit Protection class Product conforming to standard Approval
kg 146 mm Die-cast aluminium Sheet steel, hot-galvanised Die-cast aluminium Clockwise, seen on rotor IP 44 Depending on installation and position as per EN 60034-5 "B" F3-1 + 80 °C
- 40 °C

Shaft horizontal or rotor on top rotor on bottom on request None Continuous operation S1 Ball bearing - Output 10 VDC, max. mA - Tach output - Motor current limit - Control input 0-10 VDC / PWM - Soft start - Over-temperature protected electronics / motor Acc. to EN 61000-6-2 Acc. to EN 55022 Class B <= mA

Thermal overload protector TOP wired internally Variable I if protective earth is connected by customer EN 60335-1 UL 2111 CSA C22.2 Nr.77

G3G146-AB72-01 Product drawing

EC centrifugal fan
forward curved, single inlet with housing flange

Connection line AWG18, 3 x crimped core-end sleeves

Control line AWG22, 4 x crimped core-end sleeves

G3G146-AB72-01 Connection screen

EC centrifugal fan
forward curved, single inlet with housing flange

Line No. Signal
More datasheets: S553-6500-C9-F | R1G175-AB41-02 | FQA22P10 | FM93CS56LN | FM93C56N | FM93CS56LM8 | FM93C56M8 | FM93CS56M8 | 26501-DSG | FDW256P


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived G3G146-AB72-01 Datasheet file may be downloaded here without warranties.

Datasheet ID: G3G146-AB72-01 510605