645A505
Part | Datasheet |
---|---|
![]() |
645A505 (pdf) |
Related Parts | Information |
---|---|
![]() |
631A505 |
![]() |
651A505 |
![]() |
643A505 |
![]() |
632U508 |
![]() |
610A608F |
![]() |
620A608G |
![]() |
610A608G |
![]() |
626N518 |
PDF Datasheet Preview |
---|
Specifications for Mini-UHF MATERIALS Connector Parts Connector Body and Parts Male Contact Pin Outer Contact Crimp Ferrule Insulators Plating Material Brass Annealed Copper Delrin Nickel ELECTRICAL Requirement Performance Impedance Non Constant Frequency Range 0-2 GHz VSWR Max. Working Voltage At Sea level 335V rms Insulation Resistance 5000 Megohm Min. Dielectric 1000V at 60Hz, rms Withstanding Voltage For 1 Minute MECHANICAL & ENVIRONMENTAL Requirement Durability Cable Retention Cable Types Coupling Nut Temperature Range Performance 500 Matings 40 lbs. Minimum Pull Test 45 lbs. Maximum Delrin -55 to +85C 20 FOR TECHNICAL SUPPORT PHONE 973-347-4040 / FAX 973-347-2111 Back to Index - Page 21 - Mini - UHF Connectors Crimp Plugs Mini-UHF cable plugs are available in three-piece crimp and also twist-on versions to satisfy the installer’s preference. Two cable diameters are facilitated with these connectors for applicable applications. 610A608F 610A608G 610A405F RoHS compliant REQUEST DRAWING Crimp Plug Crimp Plug Twist-On Plug RG/U Fig. Cable No. 59, 62 97 REQUEST QUOTE Fig. 97 Fig. 98 Jacks Two cable jacks and one panel jack style are available as standard items. The cable jacks utilize the crimp method of assembly and the panel jack will facilitate any cable size by soldering the center conductor to the connector’s solder-cup contact. |
More datasheets: G2E146-BF01-35 | G2E140-AC13-42 | G2E146-BF05-29 | B39162B7839K410 | FDPF7N50F | 3RC | 3RD | 3RT | 631A505 | 651A505 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 645A505 Datasheet file may be downloaded here without warranties.