861A509

861A509 Datasheet


F style connectors are the least expensive, general purpose connectors with non-constant impedance for use at 500 volts or less, and for use with low frequencies to 500Mhz. These coaxial connectors are widely used in Cable TV, MATV, CCTV, and related consumer television products. They are available in a limited selection to fit various cable sizes. NOTE See V-Bite 861V509ER6 -40dB 2.3GHz

Part Datasheet
861A509 861A509 861A509 (pdf)
Related Parts Information
866B509 866B509 866B509
864B509 864B509 864B509
864B509S 864B509S 864B509S
810PE205A 810PE205A 810PE205A
810PE205G 810PE205G 810PE205G
864B509HF 864B509HF 864B509HF
PDF Datasheet Preview
- Page 24 -

Specifications for "F" Connectors

F style connectors are the least expensive, general purpose connectors with non-constant impedance for use at 500 volts or less, and for use with low frequencies to 500Mhz. These coaxial connectors are widely used in Cable TV, MATV, CCTV, and related consumer television products. They are available in a limited selection to fit various cable sizes. NOTE See V-Bite 861V509ER6 -40dB 2.3GHz

MATERIALS

Connector Parts Connector Body and Parts Male Contact Pin Insulators Plating Ferrule

Material Brass Polypropylene Nickel Annealed Copper

ELECTRICAL

Requirement Impedance

Frequency Range

VSWR Working Voltage At Sea level Insulation Resistance Contact Resistance Test Voltage

Performance Non Constant 0-500MHz see below 861V509ER6 to 3GHz Max. 500V rms 5000 Megohm Min. 3 mW Max. 1000V r.m.s

MECHANICAL & ENVIRONMENTAL

Requirement Durability Shock Cable Retention Temperature Range Moisture Range

Performance 500 Matings 30 G 40 Lbs. Min. -40 to +65°C. Continuous Test

FOR TECHNICAL SUPPORT PHONE 973-347-4040 / FAX 973-347-2111
back to index
- Page 25 -
"F" Connectors

Plugs, Jacks, Adapters

F type plugs are available in three different crimp styles two piece with separate ferrules, one piece crimp with a short crimp body and a one piece crimp with a long body. Also, a twist-on type for tool-less installations. Jacks for bulkhead, inline, or PC board, and a variety of adapters are all machined brass construction.
810A209A 810A209D 810A209G 810B209G 810D209A 810A209MV 810D209D 810D209G 810E209A 810E209D 810E209G 810A409A 810A409G 810P209A 810P209G 816B519 826B519 832A519N 830A509 831B509 832A519 843A509 845A509 851A509 F0884
2 Piece Crimp Plug, Short Ferrule 2 Piece Crimp Plug, Short Ferrule 2 Piece Crimp Plug, Short Ferrule 2 Piece Crimp Plug, Long Ferrule 2 Piece Crimp Plug, Short Ferrule 4 Pc Crimp Mini Coax. Uses BD11007 Tool 1 Piece Crimp Plug, Short Ferrule 1 Piece Crimp Plug, Short Ferrule 1 Piece Crimp Plug, Long Ferrule 1 Piece Crimp Plug, Long Ferrule 1 Piece Crimp Plug, Long Ferrule Twist-On Twist-On Push-On Push-On Male Bulkhead Receptacle. 3/8-32 THD I.D. Bulkhead Jack, Solder Tab Inline Female/Female W/Nut &Washer Inline, Male/Male Inline Female/Male Push-On Inline Female/Female “T” Adapter, Female/Male/Female “T” Adapter, Female/Female/Female Right Angle Adapter, Male/Female 75 Ohm Male Terminator

RG/U Cable
6 11 59 6 174 11 59 6 11 59 6 59 6 59 Any N/A N/A N/A N/A N/A N/A N/A N/A

Fig. No.
117 118 117 117A 119 120 121 122 130A 123 124 125 125A 126 127 128 129 130

REQUEST QUOTE REQUEST DRAWING

Fig. 117

Fig. 117A

Fig. 118

Fig. 119

Fig. 120

Fig. 121

Also See Push-EZ Next Page

Fig. 122

Fig. 123

Fig. 124

Adapters & Terminators

Fig. 125

Fig. 126

Fig. 125A
More datasheets: AT45D161-JC | AT45D161-RI | AT91SAM9261SB-CU | ACC102 | 866B509 | 864B509 | 864B509S | 810PE205A | 810PE205G | 864B509HF


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 861A509 Datasheet file may be downloaded here without warranties.

Datasheet ID: 861A509 521965