STD_220_BLK

STD_220_BLK Datasheet

STD XXX BLK

Part	Datasheet
STD_220_BLK	STD_220_BLK (pdf)

Related Parts	Information
STD_140_BLK	STD_140_BLK
STD_280_BLK	STD_280_BLK
STD_260_BLK	STD_260_BLK
STD_250_BLK	STD_250_BLK
STD_240_BLK	STD_240_BLK
STD_200_BLK	STD_200_BLK
STD_160_BLK	STD_160_BLK
STD_120_BLK	STD_120_BLK
STD_110_BLK	STD_110_BLK
STD_370_BLK	STD_370_BLK
STD_300_BLK	STD_300_BLK
STD_180_BLK	STD_180_BLK
STD_390_BLK	STD_390_BLK
STD_750_BLK	STD_750_BLK
STD_340_BLK	STD_340_BLK
STD_800_BLK	STD_800_BLK
STD_850_BLK	STD_850_BLK
STD_890_BLK	STD_890_BLK
STD_900_BLK	STD_900_BLK
STD_310_BLK	STD_310_BLK
STD_130_BLK	STD_130_BLK
STD_700_BLK	STD_700_BLK
STD_490_BLK	STD_490_BLK
STD_910_BLK	STD_910_BLK
STD_270_BLK	STD_270_BLK
STD_290_BLK	STD_290_BLK
STD_330_BLK	STD_330_BLK
STD_350_BLK	STD_350_BLK
STD_840_BLK	STD_840_BLK
STD_950_BLK	STD_950_BLK
STD_440_BLK	STD_440_BLK
STD_320_BLK	STD_320_BLK
STD_360_BLK	STD_360_BLK
STD_380_BLK	STD_380_BLK
STD_400_BLK	STD_400_BLK
STD_790_BLK	STD_790_BLK
STD_430_BLK	STD_430_BLK
STD_650_BLK	STD_650_BLK
STD_450_BLK	STD_450_BLK
STD_460_BLK	STD_460_BLK
STD_480_BLK	STD_480_BLK
STD_500_BLK	STD_500_BLK
STD_510_BLK	STD_510_BLK
STD_520_BLK	STD_520_BLK
STD_550_BLK	STD_550_BLK
STD_600_BLK	STD_600_BLK
STD_630_BLK	STD_630_BLK
STD_420_BLK	STD_420_BLK

PDF Datasheet Preview
F#9#B?J IF;9?<?97J?EDI C7J;H?7B :;I?=D CEKDJ?D= Standoff - Thermoplastic U.L. 94 V0. Color, Black Channels provide lead separation and lateral stability for components. Molded tabs retain component leads within the standoff for preassembly. Raised pads allow for easy PCB cleaning. Suitable for passive components, bi-lead, tri-lead, 3mm, 5mm, LEDs, resistors, capacitors, diodes. Standoffs vary in height from minimum to maximum, increments of STD XXX BLK LENGTH IN INCHES to COLOR 100 170 240 310 380 450 520 590 660 730 800 870 940 110 180 250 320 390 460 530 600 670 740 810 880 950 120 190 260 330 400 470 540 610 680 750 820 890 960 130 200 270 340 410 480 550 620 690 760 830 900 970 140 210 280 350 420 490 560 630 700 770 840 910 980 150 220 290 360 430 500 570 640 710 780 850 920 990 160 230 300 370 440 510 580 650 720 790 860 930 SINGLE LEAD BI-LEAD TRI-LEAD U.S. & Foreign Patents Issued and Pending 7FFB?97J?ED P-C-LITE component standoffs are designed for printed circuit board mounting of multi-lead devices ie. LEDs, IR emitter/detectors, lamps, resistors, capacitors, transistors and diodes. L;HI7J?B?JO P-C-LITE component standoffs cope with various problems in mounting passive components. These include height control, lateral stability, lead retention, lead shorting and removal of soldering residue. :;I?=D P-C-LITE component standoffs provide lead separation and retention for both bi and tri-lead components. Molded tabs retain the component and standoff as a unit permitting preassembly operations. Clearance pads are provided for proper PCB cleaning. ?DIJ7BB7J?ED P-C-LITE component standoffs permit the use of various shapes and sizes of LEDs, as well as other bi/tri-lead components. Device height control is with mounts ranging in lengths from to in increments of IF;9?<?97J?EDI C7J;H?7B :;I?=D B;:i Housing Thermoplastic black U.L. 94 V0. PCH 175 Right angle through-hole mount for LEDs. Can be used as a single LED mount or banded together in an array with its dove-tail interlocking feature. When banded together with the PCH 175 the LEDs are on centers. 5mm size - round or rectangular shape with or without Bi-lead, standard lead spacing. Tri-lead, either or lead spacing. Both the bi-lead and tri-lead LEDs can also be combined in arrays with one another. BI & TRI-LEAD LEDs LEDs IN ARRAYS Form leads with the mount, snap leads into retaining tabs. Bi-lead and tri-lead LEDs can be combined with dove-tail interlocking feature. PCH 175 U.S. & Foreign Patents Issued and Pending MODEL <;7JKH;I • Right angle PCB mount for bi and tri-lead LEDs for use as logic and diagnostic indicators. • Accommodates round and rectangular shapes of LEDs with or without • Dove-tail interlock feature allows mounting of both mono and multi-colored LEDs. • Mount forms LED leads which are locked into position by retaining tabs. • Formed LED leads are staggered in their length permitting easier PCB insertion. • Molded standoffs permit the easy cleaning of PCB after wave soldering operation.

PDF Datasheet Preview

F#9#B?J

IF;9?<?97J?EDI

C7J;H?7B :;I?=D

CEKDJ?D=

Standoff - Thermoplastic U.L. 94 V0. Color, Black

Channels provide lead separation and lateral stability for components. Molded tabs retain component leads within the standoff for preassembly. Raised pads allow for easy PCB cleaning.

Suitable for passive components, bi-lead, tri-lead, 3mm, 5mm, LEDs, resistors, capacitors, diodes. Standoffs vary in height from minimum to maximum, increments of

STD XXX BLK

LENGTH IN INCHES to

COLOR
100 170 240 310 380 450 520 590 660 730 800 870 940 110 180 250 320 390 460 530 600 670 740 810 880 950 120 190 260 330 400 470 540 610 680 750 820 890 960 130 200 270 340 410 480 550 620 690 760 830 900 970 140 210 280 350 420 490 560 630 700 770 840 910 980 150 220 290 360 430 500 570 640 710 780 850 920 990 160 230 300 370 440 510 580 650 720 790 860 930

SINGLE LEAD BI-LEAD TRI-LEAD

U.S. & Foreign Patents Issued and Pending
7FFB?97J?ED P-C-LITE component standoffs are designed for printed circuit board mounting of multi-lead devices ie. LEDs, IR emitter/detectors, lamps, resistors, capacitors, transistors and diodes.

L;HI7J?B?JO P-C-LITE component standoffs cope with various problems in mounting passive components. These include height control, lateral stability, lead retention, lead shorting and removal of soldering residue.
:;I?=D P-C-LITE component standoffs provide lead separation and retention for both bi and tri-lead components. Molded tabs retain the component and standoff as a unit permitting preassembly operations. Clearance pads are provided for proper PCB cleaning.
?DIJ7BB7J?ED P-C-LITE component standoffs permit the use of various shapes and sizes of LEDs, as well as other bi/tri-lead components. Device height control is with mounts ranging in lengths from to in increments of

IF;9?<?97J?EDI

C7J;H?7B :;I?=D

B;:i

Housing Thermoplastic black U.L. 94 V0.

PCH 175 Right angle through-hole mount for LEDs. Can be used as a single LED mount or banded together in an array with its dove-tail interlocking feature.

When banded together with the PCH 175 the LEDs are on centers.
5mm size - round or rectangular shape with or without Bi-lead, standard lead spacing. Tri-lead, either or lead spacing. Both the bi-lead and tri-lead LEDs can also be combined in arrays with one another.

BI & TRI-LEAD LEDs

LEDs IN ARRAYS

Form leads with the mount, snap leads into retaining tabs.

Bi-lead and tri-lead LEDs can be combined with dove-tail interlocking feature.

PCH 175

U.S. & Foreign Patents Issued and Pending

MODEL
<;7JKH;I
• Right angle PCB mount for bi and tri-lead LEDs for use as logic and diagnostic indicators.
• Accommodates round and rectangular shapes of LEDs with or without
• Dove-tail interlock feature allows mounting of both mono and multi-colored LEDs.
• Mount forms LED leads which are locked into position by retaining tabs.
• Formed LED leads are staggered in their length permitting easier PCB insertion.
• Molded standoffs permit the easy cleaning of PCB after wave soldering operation.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived STD_220_BLK Datasheet file may be downloaded here without warranties.

Datasheet ID: STD_220_BLK 523026