LSR3700Z08200KR500

LSR3700Z08200KR500 Datasheet


LSR37

Part Datasheet
LSR3700Z08200KR500 LSR3700Z08200KR500 LSR3700Z08200KR500 (pdf)
Related Parts Information
LSR3700003901KR500 LSR3700003901KR500 LSR3700003901KR500
LSR3700003301KR500 LSR3700003301KR500 LSR3700003301KR500
LSR3700001002KR500 LSR3700001002KR500 LSR3700001002KR500
LSR3700008201KR500 LSR3700008201KR500 LSR3700008201KR500
LSR3700006801KR500 LSR3700006801KR500 LSR3700006801KR500
LSR3700005601KR500 LSR3700005601KR500 LSR3700005601KR500
LSR3700Z05600KR500 LSR3700Z05600KR500 LSR3700Z05600KR500
LSR3700Z02700KR500 LSR3700Z02700KR500 LSR3700Z02700KR500
LSR3700Z03300KR500 LSR3700Z03300KR500 LSR3700Z03300KR500
LSR3700Z03900KR500 LSR3700Z03900KR500 LSR3700Z03900KR500
LSR3700004701KR500 LSR3700004701KR500 LSR3700004701KR500
LSR3700Z04700KR500 LSR3700Z04700KR500 LSR3700Z04700KR500
LSR3700002701KR500 LSR3700002701KR500 LSR3700002701KR500
LSR3700Z06800KR500 LSR3700Z06800KR500 LSR3700Z06800KR500
LSR3700Z02200KR500 LSR3700Z02200KR500 LSR3700Z02200KR500
LSR3700001001KR500 LSR3700001001KR500 LSR3700001001KR500
LSR3700001501KR500 LSR3700001501KR500 LSR3700001501KR500
LSR3700001801KR500 LSR3700001801KR500 LSR3700001801KR500
LSR3700002201KR500 LSR3700002201KR500 LSR3700002201KR500
PDF Datasheet Preview
LSR37

Vishay BCcomponents

High Voltage Surge Metal Glaze Leaded Resistor

A metal glazed film is deposited on a high grade ceramic body. After that caps are applied to the rods and tinned electrolytic copper wires are welded to these end caps. The resistors are coated with a light-blue lacquer which provides electrical, mechanical and climatic protection. The encapsulation is resistant to all cleaning solvents according to IEC

FEATURES
• High pulse-loading 10 kV as specified
capability flashes
• Good replacement for carbon-composite
resistors
• Lead Pb -free solder contacts
• Pure Tin plating provides compatibility with lead Pb -free
and lead containing soldering processes
• Compliant to RoHS directive 2002/95/EC

APPLICATIONS
• Application in overload and high voltage pulse hazard
circuits TV-sets, monitors , high power electronic ballasts

TECHNICAL SPECIFICATIONS

DESCRIPTION Resistance Range 1 Resistance Tolerance and Series Rated Dissipation, P70 Thermal Resistance, Rth Temperature Coefficient Voltage Coefficient Maximum Permissible Voltage Umax. Dielectric Withstanding Voltage of the Insulation for 1 Min Basic Specifications Climatic Category IEC 60068-1 Stability After:

Load 1000 h, P70 Long Term Damp Heat Test 56 Days Soldering 10 s, 260 °C

High Voltage Test for R-Value > kΩ, 10 kV 1 nF 50 x 12/Min

ESD Contact Discharge 12 kV 100 Pulses

Note 1 R values below 220 Ω are available on request

VALUE
220 Ω to 910 Ω
1 kΩ to 10 kΩ
± 10 % ± 20 % E12 series
120 K/W
0 ppm/K to + 600 ppm/K
- 600 ppm/K to + 200 ppm/K
0 to + 350 ppm/V
± 50 ppm/V

V = Pn x R
700 V

IEC 60115-1
55/155/56
max. ± % R + Ω
max. ± % R + Ω
max. ± % R + Ω
max. ± 20 % typical value ± 10 %
max. ± 20 % typical value ± 10 %

For technical questions, contact:

High Voltage Surge Metal Glaze Leaded Resistor

LSR37

Vishay BCcomponents

PART NUMBER LSR3700001002KA100

L S R 3 7 0 1 0 2 KA 1 0

MODEL/SIZE LSR3700
Notes 1 Please refer to table PACKAGING
• The PART NUMBER is shown to facilitate the introduction of a unified part numbering system for ordering products

PACKAGING

MODEL LSR37

TAPING Axial, 52 mm

AMMO PACK

PIECES

CODE
1000

REEL

PIECES

CODE
5000

DIMENSIONS
ØD L2

DIMENSIONS - resistor type and relevant physical dimensions

TYPE
Ø Dmax.

L1 max.

LSR37

L2 max.
Ød ±

For technical questions, contact:

LSR37

Vishay BCcomponents

High Voltage Surge Metal Glaze Leaded Resistor

MASS PER UNIT

TYPE LSR37

MASS mg

MARKING

The nominal resistance and tolerance are marked on the resistor using colored bands in accordance with IEC 60062, marking codes for resistors and capacitors.

Three bands are used for 20 % tolerance with no indication for the tolerance. Four bands are used for 10 % tolerance.

Grey is used instead of silver for 10 % because metal particles in the lacquer could affect high-voltage properties.

OUTLINES

The length of the body L1 is measured by inserting the leads into holes of two identical gauge plates and moving these plates parallel to each other until the resistor body is clamped without deformation IEC

FUNCTIONAL PERFORMANCE

PRODUCT CHARACTERIZATION

Standard values of rated resistance nominal resistance are taken from the E12 series with a tolerance of 10 % or 20 The values of the E12 series are in accordance with IEC

The limiting voltage DC is not applicable, because the maximum rated voltage for the maximum Rn-value of 10 kΩ at Pn = W is only V.

LIMITING VALUES

TYPE

MAXIMUM PERMISSIBLE VOLTAGE Umax. 1 V
More datasheets: LSR3700005601KR500 | LSR3700Z05600KR500 | LSR3700Z02700KR500 | LSR3700Z03300KR500 | LSR3700Z03900KR500 | LSR3700004701KR500 | LSR3700Z04700KR500 | LSR3700002701KR500 | LSR3700Z06800KR500 | LSR3700Z02200KR500


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived LSR3700Z08200KR500 Datasheet file may be downloaded here without warranties.

Datasheet ID: LSR3700Z08200KR500 521602