D11000SI

D11000SI Datasheet

D11000PS DIFFERENTIAL PROBE SYSTEM

Part	Datasheet
D11000SI	D11000SI (pdf)

PDF Datasheet Preview
PROBES AND PROBE ACCESSORIES D11000PS DIFFERENTIAL PROBE SYSTEM PROBES AND PROBE ACCESSORIES The D11000PS extends the full signal acquisition performance of the SDA 11000 and SDA 9000 to the probe tips. With 11 GHz system bandwidth, the probe enables direct measurement of high-speed serial data streams up to Gb/s. The D11000PS also provides 11 GHz system bandwidth when used with the SDA Choice of Interconnect Styles Without Compromising Performance The D11000PS provides both direct Solder-In and cabled SMA interconnect lead assemblies. Each interconnect lead comes with a dedicated probe amplifier module that has calibration data optimized for the respective lead. This eliminates the performance compromise of using a single calibration for multiple lead types. The Solder-In lead provides the highest possible signal integrity with a high loading impedance. The dual SMA interconnect leads provide a true differential 50 Ω input. This is a convenient alternative to direct cabling into the oscilloscope inputs, freeing up the second channel for other signal input, and eliminating the need to set up waveform math and match cable delays. Unsurpassed Waveform Accuracy When used to acquire input signals for the SDA 11000, SDA 9000, or SDA 18000, the D11000PS provides unprecedented waveform fidelity, even with signals at higher serial data rates. The D11000PS utilizes third generation compensation calibration, the most advanced in use today, to provide optimal system response. Each individual probe is characterized with this system. Information on the probe’s frequency and time domain responses are stored in non-volatile memory within the probe amplifier module. This information is uploaded to the higher bandwidth SDA’s when the probe is connected. The probe calibration data and the SDA oscilloscope’s calibration data combine to generate new equalization filters for the composite system. The resulting compensation system corrects for frequency response deviations, as well as group delay correction and reflection cancellation. PROBES AND PROBE ACCESSORIES D11000PS DIFFERENTIAL PROBE SYSTEM 238 1-800-5-LeCroy Reproducing accurate serial data eye patterns requires maintaining precise magnitude and phase relationships between the fundamental and the odd harmonics. The advanced calibration system used in the D11000PS assures the best eye pattern fidelity. Superior Probe Loading Characteristics Accurate frequency response is not enough to assure good waveform fidelity. Excessive probe loading can cause waveform distortion. The D11000PS continues the legacy of LeCroy high-performance probe design, placing special emphasis on minimizing loading of the circuit under test. The Solder-In lead and dedicated probe amplifier module have a high input resistance at DC and low frequencies, allowing the probe to be used in circuits which cannot drive the low resistance of a pure transmission line probe. The direct cabled SMA inputs have 50 Ω input impedance with low VSWR. Ease of Use Attention to fine details during the D11000PS design process has resulted in several “ease of use” features. A common mode measure feature allows the user to measure the average common mode component with a single click in the probe control menu. AutoColor ID lights an indicator in the probe body, matching the color of the waveform trace. When multiple channels are used, this feature instantly identifies which waveform corresponds to which probe. Several connection accessories designed specifically for the D11000PS provide convenient and secure mounting of the probe body and Solder-In tip to the test circuit. DC blocking adapters extend the common mode range of the SMA cabled input for use with higher common mode voltages such as Digital Video Interface DVI . A finger wrench allows tightening of SMA connectors on dense test fixtures. PROBES AND PROBE ACCESSORIES D11000PS DIFFERENTIAL PROBE SYSTEM Compatibility The D11000PS is designed specifically for use with the SDA 11000, SDA 9000, or SDA However, it does contain additional calibration data for use with all of the lower bandwidth WaveMaster, SDA, and DDA 5005A Series oscilloscopes and analyzers. SPECIFICATIONS Bandwidth, System, -3 dB Rise Time, System Rise Time, Probe only Attenuation, Nominal LF Attenuation Accuracy Output Zero Noise, System Differential Mode Range Common Mode Range Input Resistance at DC, Solder-In lead Minimum Input Impedance, Solder-In lead, to 11 GHz Input Impedance, SMA cable input VSWR, Typical, each lead to ground CMRR, Typical * Measured as a system with SDA 11000, SDA 9000 and SDA † Can be extended by using DC Blocking Adapters. 11 GHz Typical * < 50 ps Typical * < 40 ps ÷3 2% < 15 mV referred to input 5 mV rms Typical 1 ±1 V ±4 V, Solder-In tip ±2 V, SMA cable input† 40 kΩ differential 20 kΩ each side to ground > 175 Ω Refer to graph 50 Ω < GHz < 6 GHz > 40 dB GHz > 30 dB 1 GHz > 20 dB 4 GHz PROBES AND PROBE ACCESSORIES PROBES AND PROBE ACCESSORIES D11000PS DIFFERENTIAL PROBE SYSTEM D11000PS Includes Probe amplifier modules each for SMA input and Solder-In lead , Solder-In lead assembly 2 , SMA interconnect lead, SMA input cables matched pair , Probe body, SMA DC blocking adapters 2 , ground lead and clip, SMA finger wrench 2 , tip retaining clip kit for Solder-In lead, probe body mounting clamp set, FreeHand probe stand, ESD dissipating wrist strap, SAC-01 soft accessory case with insert, small accessory case, D11000PS Instruction Manual, certificate of traceable calibration. ORDERING INFORMATION Differential Probe System Replacement Solder-In Tip Assembly NIST Traceable Calibration with Test Data one module PRODUCT CODE D11000PS D11000SI D11000PS-CCNIST 240 1-800-5-LeCroy PROBES AND PROBE ACCESSORIES WAVELINK DIFFERENTIAL PROBES WaveLink high bandwidth differential probes are designed to provide an optimum mechanical connection for signal measurement. They virtually eliminate distortion when measuring signals, which is particularly useful in eye pattern now routine for systems using fast serial data bus architecture. WaveLink probes provide industry-leading technology for wideband signal connection to test instruments. The first differential probes to employ SiGe technology, they deliver full system bandwidth when used with LeCroy 6 GHz, 5 GHz, and 3 GHz instruments. They are also the first differential probes to use a unique calibration process to achieve superb waveform fidelity for routine voltage measurements. Features • Unique adjustable tips for reliable contact • Wide assortment of small tips ideal for restricted spaces • Best-in-class probe loading for accurate signal measurement • Superior loading characteristics and precise frequency response • Outstanding fidelity for high-speed signals D600A-AT and D300A-AT Features • Built-in thumbwheel for precise positioning of tip stays put after adjustment • Maintains sharp points for good contact • Tips made of “NiTiNOL,” a super-elastic nickel-titanium alloy • Probe flexes as you apply pressure and consistently returns to original form D600ST and D350ST Features • Best-in-class mechanical design for optimum utility • Small tip high bandwidth differential probe • Three interconnect configurations for flexibility • Very small form factor for accessing tight spaces • Highly flexible long lead • Inexpensive and easily replaceable D500PT Positioner Mounted Tip Features • Positioned tip assembly • Very small tip geometry for accessing physically constrained locations • Ideal for applications requiring multiple probes on adjacent pads • Telescoping tips for reliable tip when probe it tilted • Mounts in probe positioner or can be hand held • EZ-Probe positioner available as an accessory WaveLink D600ST and D350ST Best-in-class mechanical design for optimum utility • Small tip, high bandwidth differential probe • Three interconnect configurations for flexibility • Very small form factor for accessing tight spaces Each of the interchangeable leads is a thin, highly flexible 145 mm long lead connecting the tip and the D600ST/D350ST probe tip module. D600A-AT D300A-AT D600ST D350ST D500PT PROBES AND PROBE ACCESSORIES PROBES AND PROBE ACCESSORIES WAVELINK DIFFERENTIAL PROBES FLEXIBLE INTERCONNECTION OPTIONS SACRIFICING PERFORMANCE D500PT Positioner Mounted Probe Tip Module The probe has a very thin form factor, allowing multiple probes to be used when several channels are required to monitor signals from the same small IC. It has 2 mm of Z-axis compliance through spring-loaded telescoping tips, allowing considerable angular freedom relative to the circuit board while still maintaining reliable contact with both inputs. A ball joint between the tip and mounting arm makes it even easier to adjust for placement when already mounted in a positioner. A small thumbscrew allows precise and secure adjustment of the tip spacing. The Probe Tip Modules contain the active circuitry. Different modules have different electrical and physical interconnect characteristics, allowing the user to select the module appropriate for the application. D600A-AT and D300A-AT Adjustable Tips WaveLink adjustable tip probes are designed to provide an optimum mechanical connection for signal measurement. • Built-in thumbwheel for precise positioning of put after adjustment • Maintains sharp points for good contact • Tips made of “NiTiNOL,” a superelastic nickel-titanium alloy • Flexes as you apply pressure • Consistently returns to original form EZ-Probe Positioner The EZ-Probe positioner provides stable, accurate positioning in the x-y-z axis. Ideal for use with the D500PT and D600A-AT/D300A-AT probe tips. The unique, 3:1 motion reduction joystick allows simple, precise positioning of the attached probe in both the horizontal and vertical measuring plane. The probe has a fully articulating arm, providing 30 cm 12" reach in virtually any direction. 242 1-800-5-LeCroy PROBES AND PROBE ACCESSORIES WAVELINK DIFFERENTIAL PROBES THREE DIFFERENT TIPS FOR INTERCONNECT FLEXIBILITY Solder-In Lead The Solder-In interconnect lead features the smallest physical tip size of any high bandwidth differential probe and the highest level of electrical performance. Two very small damping resistors are directly soldered into the connect points providing a reliable, intermittent free electrical connection. The resistors have highly flexible leads allowing connection to input points with a wide range of input spacing. Quick Connect D600ST only The Quick Connect interconnect lead enables you to quickly move the probe between multiple test points on the test circuit. Just solder a pair of damping resistors at each location where interconnection is required. A small connector mounted on the probe tip, plugs into the damping resistors, letting you quickly move between sets of test points. Square Pin Many applications, such as IC characterization boards, use standard square pins for interconnect. The Square Pin interconnect lead directly mates with a pair of mm square pins which are mounted on standard mm centers. PROBES AND PROBE ACCESSORIES PROBES AND PROBE ACCESSORIES WAVELINK DIFFERENTIAL PROBES SPECIFICATIONS Rise Time, probe only D600A-AT D600ST-SI D500PT D300A-AT D350ST-SP LF Attenuation Accuracy with 0 V common mode D600A-AT, D300A-AT, D600ST, and D500PT D350ST ORDERING INFORMATION PROBE TIP MODULES WaveLink GHz, Differential Probe Adjustable Tip Module WaveLink 4 GHz, Differential Probe Adjustable Tip Module WaveLink 7 GHz, Differential Probe Small Tip Module WaveLink 4 GHz, 5 V Differential Probe Small Tip Module WaveLink 6 GHz, Differential Positioner Mounted Tip Module PRODUCT CODE D600A-AT* D300A-AT* D600ST* D350ST* D500PT* PROBE BODIES WaveLink ProLink Probe Body WaveLink ProBus Probe Body WL600 WL300 POSITIONER Cascade Microtech EZ-Probe Positioner EZ PROBE SERVICE OPTIONS NIST Traceable Calibration with Test Data† one module D600A-AT-CCNIST D300A-AT-CCNIST D600ST-CCNIST D350ST-CCNIST D500PT-CCNIST * For a complete probe, order a WL300 or WL600 Probe Body with Probe Tip Module. †-CCNIST NIST traceable calibration with test data is an available option for D600ST, D350ST, D500PT, D600A-AT, or D300A-AT probe tip module only when ordered with either a WL600 or WL300 probe body. PROBES AND PROBE ACCESSORIES PROBES AND PROBE ACCESSORIES WAVELINK DIFFERENTIAL PROBES ORDERING INFORMATION CONTINUED CONSUMABLES AND REPLACEMENT PARTS Replacement Quick Connect Lead Set for D600ST Replacement Solder-In Lead Set for D600ST Replacement Square Pin Lead Set for D600ST Extra Solder-In Lead for D350ST Extra Square Pin Lead for D350ST Replacement Tip Assembly for D500PT Replacement Resistor Kit for D600ST-SI 10 Replacement Resistor Kit for D600ST-QC 20 Replacement Probe Tip Holder Kit Replacement Probe Body Mounting Kit Replacement Probe Tips for D500PT pkg. of 4 Replacement Resistor Kit for D350ST-SI 10 Probe Characterization Fixture WaveLink Probe Series Instruction Manual PRODUCT CODE D600ST-QC D600ST-SI D600ST-SP D350ST-SI D350ST-SP D500PT-TIP PK600ST-1 PK600ST-2 PK600ST-3 PK600ST-4 PK500PT-1 PK350ST-1 PCF-200 WL-OM-E D600A-AT, D300A-AT Adjustable Tip Modules Include Protective storage case, ground wire and clip, WaveLink Series instruction manual, Quick Start guide, calibration certificate. D600ST Small Tip Module Includes Solder-In interconnect lead set with replacement damping resistors 10 , Quick Connect interconnect lead set with additional damping resistors 20 , Square Pin interconnect lead set, ground wire and clip, probe tip mounting kit, WaveLink Series instruction manual, Quick Start guide, calibration certificate. D350ST Small Tip Module Includes Solder-In interconnect lead set with replacement damping resistors 10 , Square Pin interconnect lead set, ground wire and clip, probe tip mounting kit, WaveLink Series instruction manual, Quick Start guide, calibration certificate. D500PT Positioner Mounted Tip Includes Positioned tip assembly, Probe tip module, Module mounting clamp, Ground lead and clip, WaveLink Series instruction manual, Quick Start guide, Calibration FreeHand probe stand, Tip repair tool, Replacement tips 2 WL600, WL300 Probe Bodies Include SAC-01 Soft accessory case with WaveLink Series insert, probe characterization fixture, probe body mounting clip, probe cable clamp 2 , and small probe accessory case. WaveLink Probe Calibration When ordered with WL600 or WL300 also substitute Certificate of NIST traceable calibration in place of calibration certificate. 246 1-800-5-LeCroy PROBES AND PROBE ACCESSORIES PASSIVE PROBES Passive probes are the standard probe provided with most oscilloscopes. Typical passive probes provide a 10:1 attenuation and feature a high input resistance of 10 MΩ. This high input resistance means that passive probes are the ideal tool for low frequency signals since circuit loading at these frequencies is minimized. Passive probes are designed to handle voltages of at least 400 V, some as high as 600 V. LeCroy passive probes feature an attenuation sense pin which tells the oscilloscope to scale the waveforms automatically requiring no user input. Each passive probe is recommended for a certain oscilloscope, using the right passive probe with the right oscilloscope means that the probe can be properly compensated across the entire bandwidth. Using probes with a different oscilloscope will only let you compensate for low frequencies. Features • Bandwidth from 200 MHz to 500 MHz • Probe encoding ring for automatic scale factor readout on LeCroy oscilloscopes Model PP005A PP006A PP007-WS PP007-WR PP008 PP009 PP010 PP011 Bandwidth 500 MHz 500 MHz 500 MHz 500 MHz 500 MHz 500 MHz 200 MHz 500 MHz Input R 10 MΩ 10 MΩ 10 MΩ 10 MΩ 10 MΩ 10 MΩ 10 MΩ 10 MΩ Recommended Oscilloscope 1 9300 Series 2 LC Series 3 LT Series 4 WaveSurfer 400 Series 5 WaveRunner 6000 Series 6 WaveRunner Xi Series 600 MHz 7 WaveRunner Xi 1 GHz Input C 11 pF 12 pF Attenuation 10:1 10:1 10:1 10:1 10:1 10:1 10:1 10:1 Maximum Voltage 500 V 600 V 400 V 400 V 400 V 400 V 600 V 400 V Diameter 5 mm 5 mm 5 mm 5 mm 5 mm Recommended Oscilloscope 1, 2, 12, 13 3, 11 4 5, 7, 9 4, 6, 8 4, 6, 8 10 5, 7, 9 8 WaveSurfer Xs Series 600 MHz 9 WaveSurfer Xs Series 1 GHz 10 WaveJet Series 200 MHz 11 WaveJet Series 350 MHz 12 WavePro 900 Series 13 WavePro 7000 Series ORDERING INFORMATION ÷10, 500 MHz 10 MΩ Passive Probe ÷10, 500 MHz 10 MΩ Passive Probe ÷10, 500 MHz 10 MΩ Passive Probe ÷10, 500 MHz 10 MΩ Passive Probe ÷10, 500 MHz 10 MΩ Passive Probe ÷10, 500 MHz 10 MΩ Passive Probe ÷10, 200 MHz 10 MΩ Passive Probe ÷10, 500 MHz 10 MΩ Passive Probe PRODUCT CODE PP005A PP006A PP007-WS-1 PP007-WR-1 PP008 PP009 PP010 PP011 248 1-800-5-LeCroy PROBES AND PROBE ACCESSORIES WAVELINK DIFFERENTIAL PROBES WAVELINK PROBE COMPATIBILITY CHART D600A-AT D300A-AT D600ST D350ST D500 PT WL600 WL300 SDA 18000* SDA 11000* SDA 9000* SDA 6020 SDA 4020 WM8620A WM8420A DDA 5005A • • Recommended NC Not Compatible FP Operates at Full Performance RP Operates with Reduced Performance with LPA adapters. Frequency response > 3 GHz may be altered RP1 Operates with Reduced Performance with LPA adapters. Frequency response > 3 GHz may be altered DDA 3000 • • NC • WP7300A WP7200A WP7100A • • NC • Operates on channels in 6 GHz mode only WR 204Xi WR 104Xi WR 64Xi WR 62Xi WR 44Xi WR 6KA • • NC • WL300 RP FP RP FP RP WL600 FP PROBES AND PROBE ACCESSORIES PROBES AND PROBE ACCESSORIES PASSIVE PROBES ACCESSORIES ORDERING INFORMATION PK001 Standard Probe Accessory for PP002 Ground Lead PP002 Probe Tip to BNC adapter Sprung Hook PP002 M/F Lead Long 4" M/F Lead Short 2" PK102 Standard Probe Accessory Kit for PP005/PP005 Sprung Hook Black Spring Tip mm Spring Tip mm Rigid Tip mm Probe Tip to BNC Adapter Ground Lead 11 cm Ground Lead 22 cm Ground Lead Spring IC Insulating Tip Probe Tip to BNC Adapter Adjustment Screw Driver PPK106 SMT Accessories for PP005/PP005A, PPExkV Dual Lead Adapter Single Lead Adapter mm Clip Orange Probe Tip to PCB Adapter M/F Lead Long 4" M/F Lead Short 2" mm Clip Yellow PK101 Microclip Accessory Kit for PP005/PP005A Single Lead Adapter QFPIC Clip mm Pitch PK116 Standard Probe Accessory Kit for PP006/PP006A Sprung Hook Ground Lead Ground Pin Insulating Tip Screw Driver PK006 SMT Accessories for PP006/PP006A Dual Lead Adapter PK006 Single Lead Adapter PK006 mm Clip Black and Red mm Clip Black and Red M/F Lead Long 4" M/F Lead Short 2" PRODUCT CODE PP001/002-1 PP001/002-2 PP001/002-3 PP005-HOOK PP005-ST38 PP005-ST8 PP005-RT PP005-BNC PP005-GL11 PP005-GL22 PP005-GLPT PK106-1 PK106-2 PK106-3 PK106-4 PK106-5 PK106-6 PK106-8 PK106-2 PACC-CL001 PK116-1 PK116-2 PK116-3 PK006-1 PK006-2 PK006-3 PK006-4 PROBES AND PROBE ACCESSORIES PROBES AND PROBE ACCESSORIES PASSIVE PROBES ACCESSORIES ORDERING INFORMATION PKIT1-5MM-102 Basic Adapter Kit for PP009 Sprung Hook Standard Ground Lead Adjustment Tool Rigid Tip, mm IC Cap, mm pitch Spring Tip mm Qty. 6 BNC Adapter, 4 mm plug Ground Spring High Frequency Compensated Ground Lead Spring Tip mm Qty. 5 PKIT1-5MM-101 Micro Clip Kit for PP009 Single Lead Adapter Microclip Long, Green Microclip Long, Yellow Microclip Short, Green Microclip Short, Yellow PKIT2-5MM-101 Standard Accessory Kit for PP010 Sprung Hook Standard Ground Lead Adjustment Tool Ground Attachment IC Test Tip Color Coding Rings set PRODUCT CODE PK1-5MM-101 PK1-5MM-102 PK1-5MM-103 PK1-5MM-104 PK1-5MM-108 PK1-5MM-109 PK1-5MM-110 PK1-5MM-117 PK1-5MM-118 PK1-5MM-123 PK1-5MM-124 PK1-5MM-111 PK1-5MM-114G PK1-5MM-114Y PK1-5MM-115G PK1-5MM-115Y PK2-5MM-101 PK2-5MM-102 250 1-800-5-LeCroy P2K.514I-C5m-MCmaMpp-i51tc.00h8 black PKIn1s-u5lMatMing-1C0a5p ProtectiobnlaCckap PK1-5MM-101 Sprung Hook II black PK1-5MM-113 Pico hook PK1-5MM-110 BNC Adapter PK1-5MM-114Y, PK1-5MM-114G QFP IC-Clip 13 mm long down to mm pitch X 4 = yellow 5 = green PK1-5MM-115Y PK1-5MM-115G QFP IC-Clip short down to mm pitch X 4 = yellow 5 = green 4 [02,1[06,"0]8"] PPKC1B-5AMdaMp-t1e0r PK1-5MM-117 Flexible Adapter to 4 mm banana plug PK1-5MM-116 Flexible Adapter to 2 mm banana plug PK1-5MM-111 Adapter to mm socket PAKd1j-u5sMtmMe-n1t 0To3ol PSKe1t -C53oMxd4iMncgo-1lRo0irn6sgs PK1-5MM-104 Rigid Tip mm PK1-5MM-109 Spring Tip mm PK1-5MM-124 Spring Tip mm PK1-5MM-118 Ground Spring PK1-5MM-102 Ground Lead 11 cm PK1-5MM-122 Ground Lead 22 cm to 4 mm banana plug PK1-5MM-123 PK1-5MM-121 HF Compensated Ground Lead 22 cm Ground Lead 22 cm to 2 mm banana plug PK1-5MM-112 Dual Adapter to mm socket PK1-5MM-120 Ground Lead 11 cm to mm plug PK1-5MM-119 Ground Lead 11 cm to miniclip PROBES AND PROBE ACCESSORIES Passive Probe Accessories PP005, PP009, and PP011 Series PROBES AND PROBE ACCESSORIES PROBES AND PROBE ACCESSORIES PP007-WR-1 PP007-WS-1 ORDERING INFORMATION Basic Adapter Kit Advanced Adapter Kit SMD Adapter Kit Microclip Kit ÷10 HiZ 500 MHz Passive Probe for WaveRunner Xi Series Oscilloscopes ÷10 HiZ 500 MHz Passive Probe for WaveRunner 6000A Series Oscilloscopes ÷10 HiZ 500 MHz Passive Probe for WaveSurfer 400 Series Oscilloscopes Instruction Manual A rigid tip is included PRODUCT CODE PK701 PK702 PK703 PK704 PP008-1 PP007-WR-1 PP007-WS-1 PP007-OM-E 252 1-800-5-LeCroy PK00.5I0C7m C-g0mar0pep8eintc h PK00.6I05C7mC- 0bam0plu9pei tch PK00.8I0C7mC- 0mga1prap0yit ch PK10.0I0C7m Cb-m0aro1ppw1intc h PK1.02I07C7mC -b0aml1pa2cpki tch PInKs0u0la7ti-n0g0C7ap Protection Cap APdKju0s0t7m-e0n0t3Tool CoPloKr0C0o7d -si0ne0gt 6Rings 1,5 [0,059] 1 [0,039] PK007-031 BNC Adapter PK007-015 PCB Adapter 5,8 [0,228] PK007-020 Micro Clip, Long PK007-021 Micro Clip, Short PK007-019 Pico Hook PK007-001 Sprung Hook PK007-023 Adapter, 4 mm plug PK007-022 Adapter, 2 mm plug PK007-017 Single Lead Adapter PK007-018 Dual Lead Adapter PK007-005 Spring Tip mm PK007-004 Rigid Tip mm PK007-016 Ground Spring PK007-014 10 Copper Pads 2 x 2 cm PK007-013 Ground Blade DEVICE UNDER TEST PK007-025 Probe Tip Ground Lead with Alligator Clip PK007-024 Probe Tip Ground Lead ORDERING INFORMATION PP007 AND PP008 PROBE ACCESSORIES PK701 Sprung Hook Standard Ground Lead Adjustment Tool Rigid Tip Spring Tip Color Coding Rings 3 Red, 3 Yellow, 3 Blue, 3 Green Insulating Cap IC-cap for mm Pitch IC-cap for mm Pitch IC-cap for mm Pitch IC-cap for mm Pitch IC-cap for mm Pitch Ground Blade Copper Pad PCB-adapter Ground Spring Single Adapter Lead Dual Adapter Lead Pico Hook Microclip Long mm Microclip Short mm Adapter 2 mm Plug Adapter 4 mm Plug Probe Tip Ground Lead w/0.8 mm Socket Probe Tip Ground Lead w/Alligator-clip Ground Lead with Miniclip Ground Lead with mm Socket Ground Lead with 2 mm Plug Ground Lead with 4 mm Plug HF-compensated Ground Lead BNC-adapter Product Description Brochure PK702 1 2 1 2 2 1 5 1 PK703 PK704 ORDERING INFORMATION Set of 4 ZS1500 Active Probes Set of 4 ZS1000 Active Probes GHz, 1 MΩ, pF Active Probe 1 GHz, 1 MΩ, pF Active Probe REPLACEMENT ACCESSORIES Replacement Accessory Kit for ZS Series Probes Straight Probe Tip Offset Ground Short Lead Long Lead Y Lead Adapter Right-Angle Connector Sprung Hook Red Sprung Hook Black Ground Blade Copper Pad Color Coding Rings AVAILABLE ACCESSORIES IC Lead Tip Discrete SMD Tip Bent Sharp Tip Solder-In Ground Bendable Pogo Ground Spring Hook Square Pin Ground Spring Short Right-angle Lead Long Right-angle Lead PRODUCT CODE ZS1500-QUADPAK ZS1000-QUADPAK ZS1500 ZS1000 PK-ZS PK-ZS-001 PK-ZS-002 PK-ZS-003 PK-ZS-004 PK-ZS-005 PK-ZS-006 PK-ZS-007R PK-ZS-007B PK-ZS-008 PK-ZS-009 PK-ZS-010 PACC-PT003 PACC-PT004 PACC-PT005 PACC-CD007 PACC-CD008 PACC-LD001 PACC-LD002 PACC-LD003 PACC-LD004 258 1-800-5-LeCroy PROBES AND PROBE ACCESSORIES PROBES AND PROBE ACCESSORIES PK-ZS-010 Marker Bands, 4 colors PK-ZS-001 Standard Probe Tip PK-ZS-006 Right Angle Adapter PK-ZS-002 Offset Ground PK-ZS-008 Ground Blade PK-ZS-009 Copper Pad Accessories for ZS Series High Impedance Active Probes PK-ZS-003 Ground Lead, short PK-ZS-004 Ground Lead, long PK-ZS-005 Y Lead Adapter PK-ZS-007B Sprung Hook, black PK-ZS-007R Sprung Hook, red PROBES AND PROBE ACCESSORIES HFP2500 HFP1500 HFP1000 ACTIVE VOLTAGE PROBES HFP ACTIVE PROBES LeCroy’s series of HFP active probes are versatile, small and lightweight, yet still maintain the high bandwidth needed for accurate measurement. Five interchangeable tips facilitate access regardless of tight fits and difficult locations. The FreeHand probe holder brings added versatility, allowing several probes to be used at the same time on a variety of test points while maintaining the short paths needed to preserve signal fidelity. The HFP probes also offer AutoColor ID, which automatically illuminates the probe head in a connected oscilloscope’s trace color. This unique capability eliminates the need to manually apply plastic rings or colored tape to determine which channel the probe is connected to. Features • 1 GHz to GHz bandwidth • pF input capacitance • ±8 V dynamic range • ±12 V offset range except HFP1000 • 5 interchangeable tips for probing a variety of test points • Replaceable probe tip socket • Hands-free probing with FreeHand probe holder • AutoColor ID feature matches the channel trace color SPECIFICATIONS ELECTRICAL CHARACTERISTICS BANDWIDTH PROBE ONLY HFP1000 HFP1500 HFP2500 Input Capacitance DC Input Resistance Input Dynamic Range Probe Offset Range Attenuation Accuracy Output Zero Offset Accuracy n/a for HFP1000 GENERAL CHARACTERISTICS Cable Length Probe Head Size LWH Input Sockets INCLUDED WITH STANDARD CONFIGURATION Instruction Manual, English Certificate of Calibration 1-year Warranty 1 GHz pF at 1 GHz 100 kΩ ±8 V N/A HFP1000 ±12 V HFP1500, HFP2500 ÷10 ±1% < 4 mV, referred to input ± 1% of offset value +4 mV m 61 mm x mm x mm Signal and ground sockets compatible with mm square pins, mm maximum diameter for round pins 260 1-800-5-LeCroy PROBES AND PROBE ACCESSORIES ACTIVE VOLTAGE PROBES ACCESS. INCLUDED WITH STANDARD CONFIGURATION Straight Tip Sharp Tip Bent Tip Discrete SMD Tip IC Lead Tip Square Pin Ground Spring Flexible IC Ground Bendable Pogo Ground Solder-In Ground Short Single Lead Long Single Lead Right-angle Short Single Lead Right-angle Long Single Lead Clips mm FreeHand Probe Holder Replaceable Cartridge Microclips mm Low C Tip Cartridge Soft Accessory Case HFP1000 4 ORDERING INFORMATION 1 GHz, pF Active Probe ÷10 , Small Form Factor GHz, pF Active Probe ÷10 , Small Form Factor GHz, pF Active Probe ÷10 , Small Form Factor Standard Accessory Kit for HFP2500 Standard Accessory Kit for HFP1500 Standard Accessory Kit for HFP1000 Soft Accessory Case Straight Tip Sharp Tip IC Lead Tip SMD Discrete Tip Bent Sharp Tip Freehand Probe Holder Replaceable Cartridge Low C Cartridge Solder-In Ground Bendable Pogo Ground Flexible IC Ground Spring Hook Square Pin Ground Spring Short Right-angle Lead Long Right-angle Lead Short Single Lead Long Single Lead mm Clips Microclip HFP1000 Instruction Manual, English HFP1500 Instruction Manual, English HFP2500 Instruction Manual, English PRODUCT CODE HFP1000 HFP1500 HFP2500 PK108 PK109 PK110 SAC-01 PACC-PT001 PACC-PT002 PACC-PT003 PACC-PT004 PACC-PT005 PACC-MS001 PACC-MS002 PACC-MS003 PACC-CD007 PACC-CD008 PACC-CD009 PACC-LD001 PACC-LD002 PACC-LD003 PACC-LD004 PACC-LD005 PACC-LD006 PK006-4 PACC-CL001 HFP1000-OM-E HFP1500-OM-E HFP2500-OM-E PROBES AND PROBE ACCESSORIES PPO66 PPO65 HIGH-BANDWIDTH TRANSMISSION LINE The PP066 is a high-bandwidth passive probe designed for use with the WaveMaster and other high-bandwidth oscilloscopes with 50 Ω input termination. This very low capacitance probe provides an excellent solution for higher frequency applications, especially the probing of transmission lines with Ω impedance. The PP066 accommodates a wide range of applications, including probing of analog and digital ICs commonly found in computer, communications, data storage, and other high-speed designs. Features • Interchangeable attenuator tips • Signal integrity at high bandwidth • Standard SMA cable connection • Ultra low capacitance SPECIFICATIONS ELECTRICAL CHARACTERISTICS Bandwidth Risetime Input C Input R Maximum Voltage Cable Length DC to GHz < 47 ps < pF 500 Ω ÷10 cartridge 1000 Ω ÷20 cartridge 15 V rms 1m The PP065 is a transmission line probe designed for use at very high frequencies. The probe’s input impedance remains nearly constant over its entire frequency range. Robust to over voltage and ESD exposure, it is particularly useful in applications producing fast rising, narrow pulses with amplitudes, which exceed the dynamic range of active probes. Features • 1 GHz • Low capacitance • ÷100 1 GHz 5 k passive probe SPECIFICATIONS Input R Ohm Maximum Voltage Compatibility Bandwidth Attenuation Input Capacitance 500 Ω 22 V LCXXX, 93XX, LA314, LA354, WaveRunner, and WavePro Scopes 1 GHz 100:1 pF ORDERING INFORMATION GHz Low Capacitance Passive Probe ÷10, 1 kΩ ÷20, 500 Ω 1 GHz Low Capacitance Passive Probe ÷10, 5 kΩ PRODUCT CODE PP066 PP065 INCLUDED WITH PP066 PROBE PACC-AD001 SMA to BNC Adapter 262 1-800-5-LeCroy PROBES AND PROBE ACCESSORIES DIFFERENTIAL PROBES High bandwidth, excellent common-mode rejection ratio CMRR and low noise make these active differential probes ideal for applications such as disk drive design and failure analysis, as well as wireless and data communication design. With the ProBus interface, the AP034 and AP033 become an integral part of the oscilloscope, allowing sensitivity, offset and common-mode range to be displayed on the scope screen. Common mode sensing and input protection capabilities of the AP033 add additional functionality. Features for both probes • 500 MHz AP033 and 1 GHz AP034 bandwidths • x10 gain to ÷ 10 attenuation range AP033 • 10,000:1 DC CMRR • Low 9 noise AP033 • pF/side input C AP034 • 200 µV/div AP033 • Input ESD protection • Autozero feature AP034 APO33 SPECIFICATIONS Bandwidth Gain DC Accuracy Input Resistance Differential Mode Range Offset Range Common-Mode Range CMRR AP034 1 GHz x1 ÷10 and ÷20 with plug-on attenuators 2% typical probe only 1 MΩ II pF each input to ground 2 MΩ ll pF between inputs ±400 mV x1 ±4 V ÷10 ±8 V ÷20 V x1 ±16 V ±10 ±32 V ±20 ±16 V x1 ±42 V ±10 +42 V ±20 70 Hz 10,000:1 80 dB 1 MHz 100:1 40 dB 100 MHz 25 dB 500 MHz 9:1 19 dB AP033 500 MHz x10, x1, ÷10 ÷100 with plug-on ÷10 attenuator 1% in x1 without external attenuator 1 MΩ each input to ground 2 MΩ differential between inputs ±400 mV x1 ±40 mV x10 ±4 V ÷10 ±40 V ÷100 ±400 mV x1, x10 ±4 V ±10 ±40 V ±100 ±42 V peak ±10 V peak ±100 70 Hz 10,000:1 80 dB 100 kHz 10,000:1 80 dB 1 MHz 1000:1 60 dB 10 MHz 100:1 40 dB 250 MHz 5:1 14 dB PROBES AND PROBE ACCESSORIES PROBES AND PROBE ACCESSORIES SPECIFICATIONS CONTINUED Max. Nondestruct Voltage Cable Length Operating Temperature Standard Accessories Probe Connection Accessory Kit Warranty PK033 Standard Probe Accessory Kit for AP033/AP034 Dual Lead Single Lead Offset Pin package of 10 mm Clip red and black mm Clip red and black 1x6 Square Pin Header Other Accessories for AP033/AP034 AC Coupler ÷10 Attenuator for AP033 ÷10 Attenuator for AP034 ÷20 Attenuator for AP034 ORDERING INFORMATION 1 GHz Active Differential Probe ÷1, ÷10, ÷20 500 MHz Active Differential Probe x10, ÷1, ÷10 or ÷100 DIFFERENTIAL PROBES AP034/AP033 ±200 VDC continuous m 0 °C to 50 °C ÷10 Plug-on Attenuator ÷20 Plug-on Attenuator AP034 only Plug-on AC Coupler Flex Lead Set 1 Input ‘Y’ Lead 1 Mini Clip, mm 3 Mini Clip, mm 2 Ground Lead 1 Offset Pins, Round 4 Square Pin Header Strip 1 year AP03X-FLEX-LEAD NA AP03X-OFFSET-PIN PK006-3 PK006-4 NA AP03X-AC-COUPLER AP033-ATTN AP034-DA10 AP034-DA20 PRODUCT CODE AP034 AP033 264 1-800-5-LeCroy PROBES AND PROBE ACCESSORIES HIGH VOLTAGE PASSIVE PROBES The PPE series includes five fixed-attenuation probes covering a range from 2 kV to 20 kV, and one switchable probe providing ÷10/÷100 attenuation for voltage inputs up to kV. All fixed-attenuation, standard probes automatically rescale compatible LeCroy oscilloscopes for the appropriate attenuation of the probe. Features • Safe, accurate high-voltage measurement • kV to 20 kV HIGH-VOLTAGE PROBES SELECTION GUIDE SPECIFICATIONS Types Bandwidth Input R Input C Attenuation Maximum Probe Cable MHz Ω pF Voltage Encoding PPE1.2kV* 400 50 M < 6 ÷10 / ÷100 600 V/1.2 kV No 2 m PPE2kV* 400 50 M < 6 ÷100 Yes 2 m PPE4kV* 400 50 M < 6 ÷100 Yes 2 m PPE5kV* 400 50 M < 6 ÷100 Yes 2 m PPE6kV* 400 50 M < 6 ÷1000 Yes 2 m PPE20kV† 100 50 M < 2 ÷1000 20 kV Yes 3 m 40 KV peak ORDERING INFORMATION ÷10/÷100 200/300 MHz 5 MΩ/50 MΩ High-Voltage Probe 600 V/1.2 kV max. Voltage DC ÷1000 100 MHz 50 MΩ High-Voltage Probe 20 kV 40 kV Peak max. Voltage DC and Peak AC ÷100 400 MHz 50 MΩ High-Voltage Probe 2 kV max. Voltage DC and Peak AC ÷100 400 MHz 50 MΩ High-Voltage Probe 4 kV max. Voltage DC and Peak AC ÷100 400 MHz 50 MΩ High-Voltage Probe 5 kV max. Voltage DC and Peak AC ÷1000 400 MHz 50 MΩ High-Voltage Probe 6 kV max. Voltage DC and Peak AC Accessory Kit for PPE1.2kV, 2kV, 4kV, 5kV, and 6kV Standard Probe Accessory Kit for PPE20kV Ground Lead 15 cm Hook Standard Probe Accessory Kit for PPE1.2kV, PPE2kV Sprung Hook red Ground Lead 22 cm Crocodile Clip Probe Tip to BNC Adapter IC Insulating Tip Screw Driver Probe Tip to Banana Plug Adapter Ground Lead with Banana Plug Spring Tip mm Rigid Tip V2A PRODUCT CODE PPE1.2KV PPE20KV PPE2KV PPE4KV PPE5KV PPE6KV PK103 PK104-1 PK104-2 PK103-1 PP005-G22 PK30x-2 PP005-BNC PP005-ST8 PP005-RT STANDARD ACCESSORY KIT FOR PPE20KV Ground Lead 15 cm Hook PK104-1 PK104-2 Supplied with probe: * Probe Kit Trimming tool, ground lead, rigid tip, IC insulator, BNC adapter, tip insulator, spring hook, red crocodile clip. 4mm safety ground lead, and green/yellow crocodile clip. † Probe Kit trimming tool, and ground lead with a crocodile clip. PPE1.2KV PPE2KV PPE4KV PPE5KV PPE6KV PPE20KV PROBES AND PROBE ACCESSORIES PROBES AND PROBE ACCESSORIES APO31 ADP305 ADP300 HIGH VOLTAGE DIFFERENTIAL PROBES The AP031 is a low cost, battery operated active differential probe intended for measuring higher voltages. The differential techniques employed permit measurements to be taken at two points in a circuit without reference to the ground, allowing the oscilloscope to be safely grounded without the use of opto-isolators or isolating transformers. Features • Safe floating measurements • 15 MHz bandwidth • 700 V maximum input voltage • Works with any 1 MΩ input oscilloscope SPECIFICATIONS Attenuation Bandwidth Input R Differential Mode Range Common Mode Range CMRR Power Source four AA batteries ÷10 / ÷100 15 MHz 4 MΩ ±70 V / ±700 V DC + Peak AC ±700 V DC + Peak AC 86 dB 50 Hz 56 dB 200 kHz ORDERING INFORMATION 700 V, 15 MHz Differential Probe ÷10, ÷100 PRODUCT CODE AP031 ADP30X high-voltage active probes are safe, easy-to-use, and ideally suited for measuring power electronics. The ADP300 is designed for troubleshooting low-frequency power devices and other circuits where the reference potential is elevated from the ground or the location of the ground is unknown. The ADP305 is designed for measuring the high-speed floating voltages found in today’s power electronics. Features • 20 MHz and 100 MHz bandwidth • 1,000 V rms common mode voltage • 1,400 V peak differential voltage • EN 61010 CAT III • 80 dB CMRR at 50/60 Hz • ProBus system • Full remote control 266 1-800-5-LeCroy PROBES AND PROBE ACCESSORIES HIGH VOLTAGE DIFFERENTIAL PROBES SPECIFICATIONS ELECTRICAL CHARACTERISTICS Bandwidth Differential Voltage Common Mode Voltage Low-Frequency Accuracy probe only CMRR Max. Slew Rate referenced to input AC Noise referenced to input Attenuation Input Impedance Sensitivity Interface 20 MHz ADP300 100 MHz ADP305 1,400 V peak 1,000 V rms CAT III 1% of Reading 50/60 Hz 80 dB 10,000:1 100 kHz 50 dB 300:1 60,000 V/µs ADP300 300,000 V/µs ADP305 50 mV rms ÷100/÷1000 automatically selected by scope Between inputs 8 MΩ, 6 pF Each input to ground 4 MΩ, 1 pF 1 V/div to 350 V/div ADP300 200 mV/div to 350 V/div ADP305 ProBus, 1 MΩ* GENERAL CHARACTERISTICS Overall Length Input Connectors Operating Temperature Warranty 2m 4 mm Shrouded Banana Plug 0 to 50 1 year STANDARD ACCESSORIES ADP305 All ADP300 Accessories Safety Spade 1 Red, 1 Blue Plunger Clamp Clip 1 Red, 1 Blue Plunger Jaw Clip 1 Red, 1 Blue Safe Alligator Clip 1 Red, 1 Blue Soft Accessory Case ADP300 Requires AP-1M for oscilloscopes with 50 Ω only inputs Instruction Manual Certification of Calibration Plunger Hook Clip 1 Red, 1 Blue Straps for Holding Probe ORDERING INFORMATION 1,400 V, 100 MHz High-Voltage Differential Probe 1,400 V, 20 MHz High-Voltage Differential Probe PRODUCT CODE ADP305 ADP300 PROBES AND PROBE ACCESSORIES PROBES AND PROBE ACCESSORIES CURRENT PROBES 268 1-800-5-LeCroy Accurately measure AC, DC, and impulse currents. MEASURE CURRENTS IN A WIDE RANGE OF APPLICATIONS Measuring AC and DC Currents LeCroy current probes do not require the breaking of a circuit or the insertion of a shunt to make accurate and reliable current measurements. Based on a combination of Hall effect and transformer technology, LeCroy current probes are ideal for making accurate AC, DC, and impulse current measurements. Fully Integrated with Oscilloscope Many current probes require external power supplies or amplifiers to display a waveform on the oscilloscope screen. All LeCroy current probes are powered through the LeCroy ProBus connection and require no additional hardware. Along with providing power, the ProBus connection allows the current probe and oscilloscope to communicate, resulting in current waveforms automatically displayed on screen in Amps, and calculated power traces scaled correctly in Watts. This full integration also allows for Degauss and Autozero functions to be done directly from the oscilloscope with a single button press. Applications LeCroy current probes are available in a wide range of models for a wide range of applications. The full range of LeCroy current probes includes models with bandwidths up to 100 MHz, peak currents up to 700 A and sensitivities to 10 mA/div. Multiple current probes can be used together to make measurements on three-phase systems, or a single current probe can be used with a voltage probe to make accurate instantaneous power measurements. LeCroy current probes are often used in applications such as the design and test of switching power supplies, motor drives, electric vehicles, and uninterruptible power supplies. PROBES AND PROBE ACCESSORIES CURRENT PROBES CP031 30A, 100 MHz The CP031 is LeCroy’s highest bandwidth current probe. Along with the high 100 MHz bandwidth the CP031can probe continuous currents of 30 Arms and peak currents up to 50 A. The CP031 features a small form factor making it easier to probe on a crowded, compact board. Features • 100 MHz bandwidth • Small form factor accommodates large conductors with small jaw size • 30 Arms continuous current, 50 Apeak current CP030 30 A, 50 MHz The CP030 was designed with a small form factor for today’s crowded boards. The small jaw can probe currents in tight spaces and still clamp onto conductors up to 5 mm in diameter. Continuous currents of 30 A rms and peak currents of 50 A can be measured by the CP030, which also features a 50 MHz bandwidth. Features • Small form factor accommodates large conductors with small jaw size • 30 Arms continuous current, 50 MHz bandwidth • 50 Apeak current AP015 30 A, 50 MHz The AP015 current probe can measure continuous current of 30 A rms and peak pulses of up to 50 A for durations up to 10 seconds. This probe also features an overheating protection circuit, which will display an on-screen warning to the user to prevent damage. A probe unlock detection feature is also built in to the AP015 to ensure accurate measurements. Features • 30 Arms continuous current, 50 MHz bandwidth • 50 Apeak current for up to 10 seconds • Overheating and Probe Unlock Detection CP150 150 A, 10 MHz Features • 150 Arms continuous current • 500 Apeak • 10 MHz bandwidth CP500 500 A, 2 MHz Features • 500 Arms continuous current • 700 Apeak • 2 MHz bandwidth CP031 CP030 AP015 CP150 PROBES AND PROBE ACCESSORIES CP500 269 PROBES AND PROBE ACCESSORIES SPECIFICATIONS ELECTRICAL CHARACTERISTICS Max. Continuous Input Current Bandwidth Max. Peak Current at Pulse Width Rise Time typical Minimum Sensitivity Max. In-Phase Current Low-Frequency Accuracy AC Noise Coupling CURRENT PROBES CP031† CP030† 30 A 100 MHz 50 A 10 µs ns 20 mA/div 1% mA AC, DC, GND 30 A 50 MHz 50 A 10 µs 7 ns 20 mA/div 1% mA AC, DC, GND GENERAL CHARACTERISTICS Cable Length Weight Max. Conductor Size diameter Interface Usage Environment Operating Temperature Max. Relative Humidity Max. Altitude Maximum Insulated Wire Voltage m 240 g 5 mm ProBus, 1 MΩ Indoor 0 to 40 80% 2000 m 300 V CAT I, 150 V CAT II m 240 g 5 mm ProBus, 1 MΩ Indoor 0 to 40 80% 2000 m 300 V CAT I Guaranteed at 23 °C ±3 °C † The CP031 and CP030 are compatible with LeCroy X-Stream oscilloscopes running firmware version or greater. Requires AP-1M for use with 50 Ω input only oscilloscopes. ORDERING INFORMATION PRODUCT CODE 30 A 100 MHz Current Probe AC/DC 30 Arms 50 Apeak Pulse 30 A 50 MHz Current Probe AC/DC 30 Arms 50 Apeak Pulse 30 A 50 MHz Current Probe AC/DC 30 Arms 50 Apeak Pulse 150 A 10 MHz Current Probe AC/DC 150 Arms 500 Apeak Pulse 500 A 2 MHz Current Probe AC/DC 500 Arms 700 Apeak Pulse CP031 CP030 AP015 CP150 CP500 CP031 30 A, 100 MHz 20 Current Arms Frequency Hz Maximum Input Current vs. Frequency CP031 30 A, 100 MHz 1 Insertion Impedance Frequency Hz Insertion Impedance vs. Frequency typical 1-800-5-LeCroy CP030 30 A, 50 MHz 20 Current Arms Frequency Hz Maximum Input Current vs. Frequency CP030 30 A, 50 MHz 1 Insertion Impedance Frequency Hz Insertion Impedance vs. Frequency typical PROBES AND PROBE ACCESSORIES CURRENT PROBES AP015 CP150 30 A 50 MHz 50 A 10 s 7 ns 10 mA/div 1% AC, DC, GND 150 A 10 MHz 500 A 30 µs < 35 ns 200 mA/div 500 A 1% 25 mA AC, DC, GND CP500 500 A 2 MHz 700 A < 175 ns 200 mA/div 1150 A 1% 25 mA AC, DC, GND 2m 300 g 5 mm ProBus, 1 MΩ Indoor 0 to 40 80% 2000 m 300 V CAT I 2m 500 g 20 mm ProBus, 1 MΩ Indoor 0 to 40 80% 2000 m 600 V CAT II, 300 V CAT III 6m 630 g 20 mm ProBus, 1 MΩ Indoor 0 to 40 80% 2000 m 600 V CAT II, 300 V CAT III * Guaranteed at 23 °C ±3 °C † The CP031 and CP030 are compatible with LeCroy X-Stream oscilloscopes running firmware version or greater. Requires AP-1M for use with 50 Ω input only oscilloscopes. CP150 150 A, 10 MHz Current A rms Frequency Hz Maximum Input Current vs. Frequency CP500 500 A, 2 MHz Current 300 A rms 250 100 k ORDERING INFORMATION Probe Deskew and Calibration Fixture Included ProLink Extender 48" 50 ohm Cable with Male SMA Connectors Calibration Certificate Operator’s Manual Soft Accessory Case PRODUCT CODE TF-DSQ 272 1-800-5-LeCroy PROBES AND PROBE ACCESSORIES EZ PROBE POSITIONER The EZ-Probe Positioner provides stable, accurate X, Y and Z positioning in one fluid motion. Its unique 3-D joystick, with 3:1 motion reduction and single-clutch, fullyarticulating arm, allow simple, precise positioning in anything from card cages to MCMs. Any current handheld probes can be easily attached, facilitating the measurement process and ensuring more precise connectivity. ORDERING INFORMATION Cascade Microtech EZ-Probe Positioner PRODUCT CODE EZ PROBE EZ PROBE ADPPS Power Adapter for AP033, AP034 and HFP1000 Active Probes allows the probe’s output to be connected to other non-ProBus test equipment, including spectrum and network analyzers. ORDERING INFORMATION ProBus-to-BNC and Power Adapter for AP033, AP034, and HFP Series BW limited to 1 GHz PRODUCT CODE ADPPS ADPPS TRANSIT CASE Soft Accessory Case for inside flap for storing manuals, plus roomy interior for a probe and its many accessories. ORDERING INFORMATION Soft Accessory Case for Probes PRODUCT CODE SAC-01 SAC-01 PROBES AND PROBE ACCESSORIES

PDF Datasheet Preview

PROBES AND PROBE ACCESSORIES

D11000PS DIFFERENTIAL PROBE SYSTEM

PROBES AND PROBE ACCESSORIES

The D11000PS extends the full signal acquisition performance of the SDA 11000 and SDA 9000 to the probe tips. With 11 GHz system bandwidth, the probe enables direct measurement of high-speed serial data streams up to Gb/s. The D11000PS also provides 11 GHz system bandwidth when used with the SDA

Choice of Interconnect Styles Without Compromising Performance The D11000PS provides both direct Solder-In and cabled SMA interconnect lead assemblies. Each interconnect lead comes with a dedicated probe amplifier module that has calibration data optimized for the respective lead. This eliminates the performance compromise of using a single calibration for multiple lead types. The Solder-In lead provides the highest possible signal integrity with a high loading impedance. The dual SMA interconnect leads provide a true differential 50 Ω input. This is a convenient alternative to direct cabling into the oscilloscope inputs, freeing up the second channel for other signal input, and eliminating the need to set up waveform math and match cable delays.

Unsurpassed Waveform Accuracy When used to acquire input signals for the SDA 11000, SDA 9000, or SDA 18000, the D11000PS provides unprecedented waveform fidelity, even with signals at higher serial data rates. The D11000PS utilizes third generation compensation calibration, the most advanced in use today, to provide optimal system response.

Each individual probe is characterized with this system. Information on the probe’s frequency and time domain responses are stored in non-volatile memory within the probe amplifier module. This information is uploaded to the higher bandwidth SDA’s when the probe is connected. The probe calibration data and the SDA oscilloscope’s calibration data combine to generate new equalization filters for the composite system. The resulting compensation system corrects for frequency response deviations, as well as group delay correction and reflection cancellation.

PROBES AND PROBE ACCESSORIES

D11000PS DIFFERENTIAL PROBE SYSTEM
238 1-800-5-LeCroy

Reproducing accurate serial data eye patterns requires maintaining precise magnitude and phase relationships between the fundamental and the odd harmonics. The advanced calibration system used in the D11000PS assures the best eye pattern fidelity.

Superior Probe Loading Characteristics Accurate frequency response is not enough to assure good waveform fidelity. Excessive probe loading can cause waveform distortion. The D11000PS continues the legacy of LeCroy high-performance probe design, placing special emphasis on minimizing loading of the circuit under test.

The Solder-In lead and dedicated probe amplifier module have a high input resistance at DC and low frequencies, allowing the probe to be used in circuits which cannot drive the low resistance of a pure transmission line probe. The direct cabled SMA inputs have 50 Ω input impedance with low VSWR.

Ease of Use Attention to fine details during the D11000PS design process has resulted in several “ease of use” features. A common mode measure feature allows the user to measure the average common mode component with a single click in the probe control menu. AutoColor ID lights an indicator in the probe body, matching the color of the waveform trace. When multiple channels are used, this feature instantly identifies which waveform corresponds to which probe.

Several connection accessories designed specifically for the D11000PS provide convenient and secure mounting of the probe body and Solder-In tip to the test circuit. DC blocking adapters extend the common mode range of the SMA cabled input for use with higher common mode voltages such as Digital Video Interface DVI . A finger wrench allows tightening of SMA connectors on dense test fixtures.

PROBES AND PROBE ACCESSORIES

D11000PS DIFFERENTIAL PROBE SYSTEM

Compatibility The D11000PS is designed specifically for use with the SDA 11000, SDA 9000, or SDA However, it does contain additional calibration data for use with all of the lower bandwidth WaveMaster, SDA, and DDA 5005A Series oscilloscopes and analyzers.

SPECIFICATIONS Bandwidth, System, -3 dB Rise Time, System Rise Time, Probe only Attenuation, Nominal LF Attenuation Accuracy Output Zero Noise, System Differential Mode Range Common Mode Range

Input Resistance at DC, Solder-In lead

Minimum Input Impedance, Solder-In lead, to 11 GHz

Input Impedance, SMA cable input VSWR,

Typical, each lead to ground CMRR,

Typical
* Measured as a system with SDA 11000, SDA 9000 and SDA † Can be extended by using DC Blocking Adapters.
11 GHz Typical * < 50 ps Typical * < 40 ps ÷3 2% < 15 mV referred to input 5 mV rms Typical 1 ±1 V ±4 V, Solder-In tip ±2 V, SMA cable input† 40 kΩ differential 20 kΩ each side to ground > 175 Ω Refer to graph 50 Ω < GHz < 6 GHz > 40 dB GHz > 30 dB 1 GHz > 20 dB 4 GHz

PROBES AND PROBE ACCESSORIES

PROBES AND PROBE ACCESSORIES

D11000PS DIFFERENTIAL PROBE SYSTEM

D11000PS Includes Probe amplifier modules each for SMA input and Solder-In lead , Solder-In lead assembly 2 , SMA interconnect lead, SMA input cables matched pair , Probe body, SMA DC blocking adapters 2 , ground lead and clip, SMA finger wrench 2 , tip retaining clip kit for Solder-In lead, probe body mounting clamp set, FreeHand probe stand, ESD dissipating wrist strap, SAC-01 soft accessory case with insert, small accessory case, D11000PS Instruction Manual, certificate of traceable calibration.
ORDERING INFORMATION

Differential Probe System Replacement Solder-In Tip Assembly NIST Traceable Calibration with Test Data one module

PRODUCT CODE

D11000PS D11000SI D11000PS-CCNIST
240 1-800-5-LeCroy

PROBES AND PROBE ACCESSORIES

WAVELINK DIFFERENTIAL PROBES

WaveLink high bandwidth differential probes are designed to provide an optimum mechanical connection for signal measurement. They virtually eliminate distortion when measuring signals, which is particularly useful in eye pattern now routine for systems using fast serial data bus architecture. WaveLink probes provide industry-leading technology for wideband signal connection to test instruments. The first differential probes to employ SiGe technology, they deliver full system bandwidth when used with LeCroy 6 GHz, 5 GHz, and 3 GHz instruments. They are also the first differential probes to use a unique calibration process to achieve superb waveform fidelity for routine voltage measurements.

Features
• Unique adjustable tips for reliable contact
• Wide assortment of small tips ideal for restricted spaces
• Best-in-class probe loading for accurate signal measurement
• Superior loading characteristics and precise frequency response
• Outstanding fidelity for high-speed signals

D600A-AT and D300A-AT Features
• Built-in thumbwheel for precise positioning of tip stays put after adjustment
• Maintains sharp points for good contact
• Tips made of “NiTiNOL,” a super-elastic nickel-titanium alloy
• Probe flexes as you apply pressure and consistently returns to original form

D600ST and D350ST Features
• Best-in-class mechanical design for optimum utility
• Small tip high bandwidth differential probe
• Three interconnect configurations for flexibility
• Very small form factor for accessing tight spaces
• Highly flexible long lead
• Inexpensive and easily replaceable

D500PT Positioner Mounted Tip Features
• Positioned tip assembly
• Very small tip geometry for accessing physically constrained locations
• Ideal for applications requiring multiple probes on adjacent pads
• Telescoping tips for reliable tip when probe it tilted
• Mounts in probe positioner or can be hand held
• EZ-Probe positioner available as an accessory

WaveLink D600ST and D350ST Best-in-class mechanical design for optimum utility
• Small tip, high bandwidth differential probe
• Three interconnect configurations for flexibility
• Very small form factor for accessing tight spaces

Each of the interchangeable leads is a thin, highly flexible 145 mm long lead connecting the tip and the D600ST/D350ST probe tip module.

D600A-AT D300A-AT

D600ST D350ST D500PT

PROBES AND PROBE ACCESSORIES

PROBES AND PROBE ACCESSORIES

WAVELINK DIFFERENTIAL PROBES

FLEXIBLE INTERCONNECTION OPTIONS SACRIFICING PERFORMANCE

D500PT Positioner Mounted Probe Tip Module The probe has a very thin form factor, allowing multiple probes to be used when several channels are required to monitor signals from the same small IC. It has 2 mm of Z-axis compliance through spring-loaded telescoping tips, allowing considerable angular freedom relative to the circuit board while still maintaining reliable contact with both inputs. A ball joint between the tip and mounting arm makes it even easier to adjust for placement when already mounted in a positioner. A small thumbscrew allows precise and secure adjustment of the tip spacing.

The Probe Tip Modules contain the active circuitry. Different modules have different electrical and physical interconnect characteristics, allowing the user to select the module appropriate for the application.

D600A-AT and D300A-AT Adjustable Tips WaveLink adjustable tip probes are designed to provide an optimum mechanical connection for signal measurement.
• Built-in thumbwheel for precise positioning of put after adjustment
• Maintains sharp points for good contact
• Tips made of “NiTiNOL,” a superelastic nickel-titanium alloy
• Flexes as you apply pressure
• Consistently returns to original form

EZ-Probe Positioner The EZ-Probe positioner provides stable, accurate positioning in the x-y-z axis. Ideal for use with the D500PT and D600A-AT/D300A-AT probe tips. The unique, 3:1 motion reduction joystick allows simple, precise positioning of the attached probe in both the horizontal and vertical measuring plane. The probe has a fully articulating arm, providing 30 cm 12" reach in virtually any direction.
242 1-800-5-LeCroy

PROBES AND PROBE ACCESSORIES

WAVELINK DIFFERENTIAL PROBES

THREE DIFFERENT TIPS FOR INTERCONNECT FLEXIBILITY Solder-In Lead The Solder-In interconnect lead features the smallest physical tip size of any high bandwidth differential probe and the highest level of electrical performance. Two very small damping resistors are directly soldered into the connect points providing a reliable, intermittent free electrical connection. The resistors have highly flexible leads allowing connection to input points with a wide range of input spacing.

Quick Connect D600ST only The Quick Connect interconnect lead enables you to quickly move the probe between multiple test points on the test circuit. Just solder a pair of damping resistors at each location where interconnection is required. A small connector mounted on the probe tip, plugs into the damping resistors, letting you quickly move between sets of test points.

Square Pin Many applications, such as IC characterization boards, use standard square pins for interconnect. The Square Pin interconnect lead directly mates with a pair of mm square pins which are mounted on standard mm centers.

PROBES AND PROBE ACCESSORIES

PROBES AND PROBE ACCESSORIES

WAVELINK DIFFERENTIAL PROBES

SPECIFICATIONS

Rise Time, probe only D600A-AT D600ST-SI D500PT D300A-AT D350ST-SP LF Attenuation Accuracy with 0 V common mode D600A-AT, D300A-AT, D600ST, and D500PT

D350ST
ORDERING INFORMATION

PROBE TIP MODULES WaveLink GHz, Differential Probe Adjustable Tip Module WaveLink 4 GHz, Differential Probe Adjustable Tip Module WaveLink 7 GHz, Differential Probe Small Tip Module WaveLink 4 GHz, 5 V Differential Probe Small Tip Module WaveLink 6 GHz, Differential Positioner Mounted Tip Module

PRODUCT CODE

D600A-AT* D300A-AT*

D600ST* D350ST* D500PT*

PROBE BODIES WaveLink ProLink Probe Body WaveLink ProBus Probe Body

WL600 WL300

POSITIONER Cascade Microtech EZ-Probe Positioner

EZ PROBE

SERVICE OPTIONS NIST Traceable Calibration with Test Data† one module

D600A-AT-CCNIST D300A-AT-CCNIST

D600ST-CCNIST D350ST-CCNIST D500PT-CCNIST
* For a complete probe, order a WL300 or WL600 Probe Body with Probe Tip Module. †-CCNIST NIST traceable calibration with test data is an available option for D600ST, D350ST, D500PT, D600A-AT, or D300A-AT probe tip module only when ordered with either a WL600 or WL300 probe body.

PROBES AND PROBE ACCESSORIES

PROBES AND PROBE ACCESSORIES

WAVELINK DIFFERENTIAL PROBES
ORDERING INFORMATION CONTINUED

CONSUMABLES AND REPLACEMENT PARTS Replacement Quick Connect Lead Set for D600ST Replacement Solder-In Lead Set for D600ST Replacement Square Pin Lead Set for D600ST Extra Solder-In Lead for D350ST Extra Square Pin Lead for D350ST Replacement Tip Assembly for D500PT Replacement Resistor Kit for D600ST-SI 10 Replacement Resistor Kit for D600ST-QC 20 Replacement Probe Tip Holder Kit Replacement Probe Body Mounting Kit Replacement Probe Tips for D500PT pkg. of 4 Replacement Resistor Kit for D350ST-SI 10 Probe Characterization Fixture WaveLink Probe Series Instruction Manual

PRODUCT CODE

D600ST-QC D600ST-SI D600ST-SP D350ST-SI D350ST-SP D500PT-TIP PK600ST-1 PK600ST-2 PK600ST-3 PK600ST-4 PK500PT-1 PK350ST-1

PCF-200 WL-OM-E

D600A-AT, D300A-AT Adjustable Tip Modules Include Protective storage case, ground wire and clip, WaveLink Series instruction manual, Quick Start guide, calibration certificate.

D600ST Small Tip Module Includes Solder-In interconnect lead set with replacement damping resistors 10 , Quick Connect interconnect lead set with additional damping resistors 20 , Square Pin interconnect lead set, ground wire and clip, probe tip mounting kit, WaveLink Series instruction manual, Quick Start guide, calibration certificate.

D350ST Small Tip Module Includes Solder-In interconnect lead set with replacement damping resistors 10 , Square Pin interconnect lead set, ground wire and clip, probe tip mounting kit, WaveLink Series instruction manual, Quick Start guide, calibration certificate.

D500PT Positioner Mounted Tip Includes Positioned tip assembly, Probe tip module, Module mounting clamp, Ground lead and clip, WaveLink Series instruction manual, Quick Start guide, Calibration FreeHand probe stand, Tip repair tool, Replacement tips 2

WL600, WL300 Probe Bodies Include SAC-01 Soft accessory case with WaveLink Series insert, probe characterization fixture, probe body mounting clip, probe cable clamp 2 , and small probe accessory case.

WaveLink Probe Calibration When ordered with WL600 or WL300 also substitute Certificate of NIST traceable calibration in place of calibration certificate.
246 1-800-5-LeCroy

PROBES AND PROBE ACCESSORIES

PASSIVE PROBES

Passive probes are the standard probe provided with most oscilloscopes. Typical passive probes provide a 10:1 attenuation and feature a high input resistance of 10 MΩ. This high input resistance means that passive probes are the ideal tool for low frequency signals since circuit loading at these frequencies is minimized. Passive probes are designed to handle voltages of at least 400 V, some as high as 600 V. LeCroy passive probes feature an attenuation sense pin which tells the oscilloscope to scale the waveforms automatically requiring no user input.

Each passive probe is recommended for a certain oscilloscope, using the right passive probe with the right oscilloscope means that the probe can be properly compensated across the entire bandwidth. Using probes with a different oscilloscope will only let you compensate for low frequencies.

Features
• Bandwidth from 200 MHz to 500 MHz
• Probe encoding ring for automatic scale factor readout on LeCroy oscilloscopes

Model

PP005A PP006A PP007-WS PP007-WR PP008 PP009 PP010 PP011

Bandwidth
500 MHz 500 MHz 500 MHz 500 MHz 500 MHz 500 MHz 200 MHz 500 MHz

Input R
10 MΩ 10 MΩ 10 MΩ 10 MΩ 10 MΩ 10 MΩ 10 MΩ 10 MΩ

Recommended Oscilloscope 1 9300 Series 2 LC Series 3 LT Series 4 WaveSurfer 400 Series 5 WaveRunner 6000 Series 6 WaveRunner Xi Series 600 MHz 7 WaveRunner Xi 1 GHz

Input C
11 pF 12 pF

Attenuation
10:1 10:1 10:1 10:1 10:1 10:1 10:1 10:1

Maximum Voltage
500 V 600 V 400 V 400 V 400 V 400 V 600 V 400 V

Diameter
5 mm 5 mm 5 mm 5 mm 5 mm

Recommended Oscilloscope
1, 2, 12, 13 3, 11 4 5, 7, 9 4, 6, 8 4, 6, 8 10 5, 7, 9
8 WaveSurfer Xs Series 600 MHz 9 WaveSurfer Xs Series 1 GHz 10 WaveJet Series 200 MHz 11 WaveJet Series 350 MHz 12 WavePro 900 Series 13 WavePro 7000 Series
ORDERING INFORMATION
÷10, 500 MHz 10 MΩ Passive Probe ÷10, 500 MHz 10 MΩ Passive Probe ÷10, 500 MHz 10 MΩ Passive Probe ÷10, 500 MHz 10 MΩ Passive Probe ÷10, 500 MHz 10 MΩ Passive Probe ÷10, 500 MHz 10 MΩ Passive Probe ÷10, 200 MHz 10 MΩ Passive Probe ÷10, 500 MHz 10 MΩ Passive Probe

PRODUCT CODE

PP005A PP006A PP007-WS-1 PP007-WR-1

PP008 PP009 PP010 PP011
248 1-800-5-LeCroy

PROBES AND PROBE ACCESSORIES

WAVELINK DIFFERENTIAL PROBES

WAVELINK PROBE COMPATIBILITY CHART

D600A-AT D300A-AT D600ST D350ST D500 PT WL600 WL300

SDA 18000* SDA 11000* SDA 9000* SDA 6020 SDA 4020

WM8620A WM8420A

DDA 5005A
•
• Recommended

NC Not Compatible

FP Operates at Full Performance

RP Operates with Reduced Performance with

LPA adapters. Frequency response > 3 GHz
may be altered

RP1 Operates with Reduced Performance with

LPA adapters. Frequency response > 3 GHz
may be altered

DDA 3000
•
• NC
•

WP7300A WP7200A WP7100A
•
• NC
•
*Operates on channels in 6 GHz mode only

WR 204Xi WR 104Xi WR 64Xi WR 62Xi WR 44Xi WR 6KA
•
• NC
•

WL300 RP FP RP FP RP

WL600 FP

PROBES AND PROBE ACCESSORIES

PROBES AND PROBE ACCESSORIES

PASSIVE PROBES ACCESSORIES
ORDERING INFORMATION

PK001 Standard Probe Accessory for PP002 Ground Lead PP002 Probe Tip to BNC adapter Sprung Hook PP002 M/F Lead Long 4" M/F Lead Short 2"

PK102 Standard Probe Accessory Kit for PP005/PP005 Sprung Hook Black Spring Tip mm Spring Tip mm Rigid Tip mm Probe Tip to BNC Adapter Ground Lead 11 cm Ground Lead 22 cm Ground Lead Spring IC Insulating Tip Probe Tip to BNC Adapter Adjustment Screw Driver

PPK106 SMT Accessories for PP005/PP005A, PPExkV Dual Lead Adapter Single Lead Adapter mm Clip Orange Probe Tip to PCB Adapter M/F Lead Long 4" M/F Lead Short 2" mm Clip Yellow

PK101 Microclip Accessory Kit for PP005/PP005A Single Lead Adapter QFPIC Clip mm Pitch

PK116 Standard Probe Accessory Kit for PP006/PP006A Sprung Hook Ground Lead Ground Pin Insulating Tip Screw Driver

PK006 SMT Accessories for PP006/PP006A Dual Lead Adapter PK006 Single Lead Adapter PK006 mm Clip Black and Red mm Clip Black and Red M/F Lead Long 4" M/F Lead Short 2"

PRODUCT CODE

PP001/002-1 PP001/002-2 PP001/002-3

PP005-HOOK PP005-ST38 PP005-ST8

PP005-RT PP005-BNC PP005-GL11 PP005-GL22 PP005-GLPT

PK106-1 PK106-2 PK106-3 PK106-4 PK106-5 PK106-6 PK106-8

PK106-2 PACC-CL001

PK116-1 PK116-2 PK116-3

PK006-1 PK006-2 PK006-3 PK006-4

PROBES AND PROBE ACCESSORIES

PROBES AND PROBE ACCESSORIES

PASSIVE PROBES ACCESSORIES
ORDERING INFORMATION

PKIT1-5MM-102 Basic Adapter Kit for PP009 Sprung Hook Standard Ground Lead Adjustment Tool Rigid Tip, mm IC Cap, mm pitch Spring Tip mm Qty. 6 BNC Adapter, 4 mm plug Ground Spring High Frequency Compensated Ground Lead Spring Tip mm Qty. 5

PKIT1-5MM-101 Micro Clip Kit for PP009 Single Lead Adapter Microclip Long, Green Microclip Long, Yellow Microclip Short, Green Microclip Short, Yellow

PKIT2-5MM-101 Standard Accessory Kit for PP010 Sprung Hook Standard Ground Lead Adjustment Tool Ground Attachment IC Test Tip Color Coding Rings set

PRODUCT CODE

PK1-5MM-101 PK1-5MM-102 PK1-5MM-103 PK1-5MM-104 PK1-5MM-108 PK1-5MM-109 PK1-5MM-110 PK1-5MM-117 PK1-5MM-118 PK1-5MM-123 PK1-5MM-124

PK1-5MM-111 PK1-5MM-114G PK1-5MM-114Y PK1-5MM-115G PK1-5MM-115Y

PK2-5MM-101 PK2-5MM-102
250 1-800-5-LeCroy

P2K.514I-C5m-MCmaMpp-i51tc.00h8 black PKIn1s-u5lMatMing-1C0a5p ProtectiobnlaCckap

PK1-5MM-101 Sprung Hook II
black

PK1-5MM-113 Pico hook

PK1-5MM-110 BNC Adapter

PK1-5MM-114Y, PK1-5MM-114G QFP IC-Clip 13 mm long down to mm pitch

X 4 = yellow 5 = green

PK1-5MM-115Y PK1-5MM-115G QFP IC-Clip short down to mm pitch X 4 = yellow 5 = green
4 [02,1[06,"0]8"]

PPKC1B-5AMdaMp-t1e0r

PK1-5MM-117 Flexible Adapter to 4 mm banana plug

PK1-5MM-116 Flexible Adapter to 2 mm banana plug

PK1-5MM-111 Adapter to mm socket

PAKd1j-u5sMtmMe-n1t 0To3ol

PSKe1t -C53oMxd4iMncgo-1lRo0irn6sgs

PK1-5MM-104 Rigid Tip mm

PK1-5MM-109 Spring Tip mm

PK1-5MM-124 Spring Tip mm

PK1-5MM-118 Ground Spring

PK1-5MM-102 Ground Lead 11 cm

PK1-5MM-122 Ground Lead 22 cm to 4 mm banana plug

PK1-5MM-123

PK1-5MM-121

HF Compensated Ground Lead 22 cm Ground Lead 22 cm to 2 mm banana plug

PK1-5MM-112 Dual Adapter to mm socket

PK1-5MM-120 Ground Lead 11 cm to mm plug

PK1-5MM-119 Ground Lead 11 cm to miniclip

PROBES AND PROBE ACCESSORIES

Passive Probe Accessories PP005, PP009, and PP011 Series

PROBES AND PROBE ACCESSORIES

PROBES AND PROBE ACCESSORIES

PP007-WR-1 PP007-WS-1
ORDERING INFORMATION

Basic Adapter Kit Advanced Adapter Kit SMD Adapter Kit Microclip Kit ÷10 HiZ 500 MHz Passive Probe for WaveRunner Xi Series Oscilloscopes ÷10 HiZ 500 MHz Passive Probe for WaveRunner 6000A Series Oscilloscopes ÷10 HiZ 500 MHz Passive Probe for WaveSurfer 400 Series Oscilloscopes Instruction Manual
* A rigid tip is included

PRODUCT CODE PK701 PK702 PK703 PK704

PP008-1

PP007-WR-1

PP007-WS-1

PP007-OM-E
252 1-800-5-LeCroy

PK00.5I0C7m C-g0mar0pep8eintc h

PK00.6I05C7mC- 0bam0plu9pei tch

PK00.8I0C7mC- 0mga1prap0yit ch

PK10.0I0C7m Cb-m0aro1ppw1intc h

PK1.02I07C7mC -b0aml1pa2cpki tch

PInKs0u0la7ti-n0g0C7ap

Protection Cap

APdKju0s0t7m-e0n0t3Tool

CoPloKr0C0o7d -si0ne0gt 6Rings
1,5 [0,059]
1 [0,039]

PK007-031 BNC Adapter

PK007-015 PCB Adapter
5,8 [0,228]

PK007-020 Micro Clip, Long

PK007-021 Micro Clip, Short

PK007-019 Pico Hook

PK007-001 Sprung Hook

PK007-023 Adapter, 4 mm plug

PK007-022 Adapter, 2 mm plug

PK007-017 Single Lead Adapter

PK007-018 Dual Lead Adapter

PK007-005 Spring Tip mm

PK007-004 Rigid Tip mm

PK007-016 Ground Spring

PK007-014 10 Copper Pads
2 x 2 cm

PK007-013 Ground Blade

DEVICE UNDER TEST

PK007-025 Probe Tip Ground Lead
with Alligator Clip

PK007-024 Probe Tip Ground Lead
ORDERING INFORMATION PP007 AND PP008

PROBE ACCESSORIES

PK701

Sprung Hook

Standard Ground Lead

Adjustment Tool

Rigid Tip

Spring Tip

Color Coding Rings
3 Red, 3 Yellow, 3 Blue, 3 Green

Insulating Cap

IC-cap for mm Pitch

IC-cap for mm Pitch

IC-cap for mm Pitch

IC-cap for mm Pitch

IC-cap for mm Pitch

Ground Blade

Copper Pad

PCB-adapter

Ground Spring

Single Adapter Lead

Dual Adapter Lead

Pico Hook

Microclip Long mm

Microclip Short mm

Adapter 2 mm Plug

Adapter 4 mm Plug

Probe Tip Ground Lead
w/0.8 mm Socket

Probe Tip Ground Lead
w/Alligator-clip

Ground Lead with Miniclip

Ground Lead with mm Socket

Ground Lead with 2 mm Plug

Ground Lead with 4 mm Plug

HF-compensated Ground Lead

BNC-adapter

Product Description Brochure

PK702 1 2 1 2
2 1 5 1

PK703 PK704
ORDERING INFORMATION

Set of 4 ZS1500 Active Probes Set of 4 ZS1000 Active Probes GHz, 1 MΩ, pF Active Probe 1 GHz, 1 MΩ, pF Active Probe

REPLACEMENT ACCESSORIES Replacement Accessory Kit for ZS Series Probes Straight Probe Tip Offset Ground Short Lead Long Lead Y Lead Adapter Right-Angle Connector Sprung Hook Red Sprung Hook Black Ground Blade Copper Pad Color Coding Rings

AVAILABLE ACCESSORIES IC Lead Tip Discrete SMD Tip Bent Sharp Tip Solder-In Ground Bendable Pogo Ground Spring Hook Square Pin Ground Spring Short Right-angle Lead Long Right-angle Lead

PRODUCT CODE

ZS1500-QUADPAK ZS1000-QUADPAK

ZS1500 ZS1000

PK-ZS PK-ZS-001 PK-ZS-002 PK-ZS-003 PK-ZS-004 PK-ZS-005 PK-ZS-006 PK-ZS-007R PK-ZS-007B PK-ZS-008 PK-ZS-009 PK-ZS-010

PACC-PT003 PACC-PT004 PACC-PT005 PACC-CD007 PACC-CD008 PACC-LD001 PACC-LD002 PACC-LD003 PACC-LD004
258 1-800-5-LeCroy

PROBES AND PROBE ACCESSORIES

PROBES AND PROBE ACCESSORIES

PK-ZS-010 Marker Bands, 4 colors

PK-ZS-001 Standard Probe Tip

PK-ZS-006 Right Angle Adapter

PK-ZS-002 Offset Ground

PK-ZS-008 Ground Blade

PK-ZS-009 Copper Pad

Accessories for ZS Series High Impedance Active Probes

PK-ZS-003 Ground Lead, short

PK-ZS-004 Ground Lead, long

PK-ZS-005 Y Lead Adapter

PK-ZS-007B Sprung Hook, black

PK-ZS-007R Sprung Hook, red

PROBES AND PROBE ACCESSORIES

HFP2500 HFP1500 HFP1000

ACTIVE VOLTAGE PROBES

HFP ACTIVE PROBES LeCroy’s series of HFP active probes are versatile, small and lightweight, yet still maintain the high bandwidth needed for accurate measurement. Five interchangeable tips facilitate access regardless of tight fits and difficult locations. The FreeHand probe holder brings added versatility, allowing several probes to be used at the same time on a variety of test points while maintaining the short paths needed to preserve signal fidelity. The HFP probes also offer AutoColor ID, which automatically illuminates the probe head in a connected oscilloscope’s trace color. This unique capability eliminates the need to manually apply plastic rings or colored tape to determine which channel the probe is connected to.

Features
• 1 GHz to GHz bandwidth
• pF input capacitance
• ±8 V dynamic range
• ±12 V offset range except HFP1000
• 5 interchangeable tips for probing a variety of test points
• Replaceable probe tip socket
• Hands-free probing with FreeHand probe holder
• AutoColor ID feature matches the channel trace color

SPECIFICATIONS ELECTRICAL CHARACTERISTICS BANDWIDTH PROBE ONLY HFP1000 HFP1500 HFP2500 Input Capacitance DC Input Resistance Input Dynamic Range Probe Offset Range

Attenuation Accuracy Output Zero Offset Accuracy n/a for HFP1000

GENERAL CHARACTERISTICS Cable Length Probe Head Size LWH Input Sockets

INCLUDED WITH STANDARD CONFIGURATION Instruction Manual, English Certificate of Calibration 1-year Warranty
1 GHz pF at 1 GHz 100 kΩ ±8 V N/A HFP1000 ±12 V HFP1500, HFP2500 ÷10 ±1% < 4 mV, referred to input ± 1% of offset value +4 mV
m 61 mm x mm x mm Signal and ground sockets compatible with mm square pins, mm maximum diameter for round pins
260 1-800-5-LeCroy

PROBES AND PROBE ACCESSORIES

ACTIVE VOLTAGE PROBES ACCESS.

INCLUDED WITH STANDARD CONFIGURATION

Straight Tip Sharp Tip Bent Tip Discrete SMD Tip IC Lead Tip Square Pin Ground Spring Flexible IC Ground Bendable Pogo Ground Solder-In Ground Short Single Lead Long Single Lead Right-angle Short Single Lead Right-angle Long Single Lead Clips mm FreeHand Probe Holder Replaceable Cartridge Microclips mm Low C Tip Cartridge Soft Accessory Case

HFP1000 4
ORDERING INFORMATION
1 GHz, pF Active Probe ÷10 , Small Form Factor GHz, pF Active Probe ÷10 , Small Form Factor GHz, pF Active Probe ÷10 , Small Form Factor Standard Accessory Kit for HFP2500 Standard Accessory Kit for HFP1500 Standard Accessory Kit for HFP1000 Soft Accessory Case Straight Tip Sharp Tip IC Lead Tip SMD Discrete Tip Bent Sharp Tip Freehand Probe Holder Replaceable Cartridge Low C Cartridge Solder-In Ground Bendable Pogo Ground Flexible IC Ground Spring Hook Square Pin Ground Spring Short Right-angle Lead Long Right-angle Lead Short Single Lead Long Single Lead mm Clips Microclip HFP1000 Instruction Manual, English HFP1500 Instruction Manual, English HFP2500 Instruction Manual, English

PRODUCT CODE

HFP1000 HFP1500 HFP2500

PK108 PK109 PK110 SAC-01 PACC-PT001 PACC-PT002 PACC-PT003 PACC-PT004 PACC-PT005 PACC-MS001 PACC-MS002 PACC-MS003 PACC-CD007 PACC-CD008 PACC-CD009 PACC-LD001 PACC-LD002 PACC-LD003 PACC-LD004 PACC-LD005 PACC-LD006 PK006-4 PACC-CL001 HFP1000-OM-E HFP1500-OM-E HFP2500-OM-E

PROBES AND PROBE ACCESSORIES

PPO66 PPO65

HIGH-BANDWIDTH TRANSMISSION LINE

The PP066 is a high-bandwidth passive probe designed for use with the WaveMaster and other high-bandwidth oscilloscopes with 50 Ω input termination. This very low capacitance probe provides an excellent solution for higher frequency applications, especially the probing of transmission lines with Ω impedance. The PP066 accommodates a wide range of applications, including probing of analog and digital ICs commonly found in computer, communications, data storage, and other high-speed designs.

Features
• Interchangeable attenuator tips
• Signal integrity at high bandwidth
• Standard SMA cable connection
• Ultra low capacitance

SPECIFICATIONS ELECTRICAL CHARACTERISTICS Bandwidth Risetime Input C Input R

Maximum Voltage Cable Length

DC to GHz < 47 ps < pF 500 Ω ÷10 cartridge 1000 Ω ÷20 cartridge 15 V rms 1m

The PP065 is a transmission line probe designed for use at very high frequencies. The probe’s input impedance remains nearly constant over its entire frequency range. Robust to over voltage and ESD exposure, it is particularly useful in applications producing fast rising, narrow pulses with amplitudes, which exceed the dynamic range of active probes.

Features
• 1 GHz
• Low capacitance
• ÷100 1 GHz 5 k passive probe

SPECIFICATIONS Input R Ohm Maximum Voltage Compatibility

Bandwidth Attenuation Input Capacitance
500 Ω 22 V LCXXX, 93XX, LA314, LA354, WaveRunner, and WavePro Scopes 1 GHz 100:1 pF
ORDERING INFORMATION

GHz Low Capacitance Passive Probe ÷10, 1 kΩ ÷20, 500 Ω 1 GHz Low Capacitance Passive Probe ÷10, 5 kΩ

PRODUCT CODE PP066 PP065

INCLUDED WITH PP066 PROBE PACC-AD001

SMA to BNC Adapter
262 1-800-5-LeCroy

PROBES AND PROBE ACCESSORIES

DIFFERENTIAL PROBES

High bandwidth, excellent common-mode rejection ratio CMRR and low noise make these active differential probes ideal for applications such as disk drive design and failure analysis, as well as wireless and data communication design. With the ProBus interface, the AP034 and AP033 become an integral part of the oscilloscope, allowing sensitivity, offset and common-mode range to be displayed on the scope screen. Common mode sensing and input protection capabilities of the AP033 add additional functionality.

Features for both probes
• 500 MHz AP033 and 1 GHz AP034 bandwidths
• x10 gain to ÷ 10 attenuation range AP033
• 10,000:1 DC CMRR
• Low 9 noise AP033
• pF/side input C AP034
• 200 µV/div AP033
• Input ESD protection
• Autozero feature

AP034 APO33

SPECIFICATIONS Bandwidth Gain DC Accuracy Input Resistance Differential Mode Range

Offset Range

Common-Mode Range

CMRR

AP034
1 GHz x1 ÷10 and ÷20 with plug-on attenuators 2% typical probe only
1 MΩ II pF each input to ground 2 MΩ ll pF between inputs ±400 mV x1 ±4 V ÷10 ±8 V ÷20

V x1 ±16 V ±10 ±32 V ±20 ±16 V x1 ±42 V ±10 +42 V ±20 70 Hz 10,000:1 80 dB 1 MHz 100:1 40 dB 100 MHz 25 dB 500 MHz 9:1 19 dB

AP033
500 MHz x10, x1, ÷10 ÷100 with plug-on ÷10 attenuator 1% in x1 without external attenuator 1 MΩ each input to ground 2 MΩ differential between inputs ±400 mV x1 ±40 mV x10 ±4 V ÷10 ±40 V ÷100 ±400 mV x1, x10 ±4 V ±10 ±40 V ±100 ±42 V peak ±10 V peak ±100
70 Hz 10,000:1 80 dB 100 kHz 10,000:1 80 dB 1 MHz 1000:1 60 dB 10 MHz 100:1 40 dB 250 MHz 5:1 14 dB

PROBES AND PROBE ACCESSORIES

PROBES AND PROBE ACCESSORIES

SPECIFICATIONS CONTINUED

Max. Nondestruct Voltage Cable Length Operating Temperature Standard Accessories

Probe Connection Accessory Kit

Warranty PK033 Standard Probe Accessory Kit for AP033/AP034 Dual Lead Single Lead Offset Pin package of 10 mm Clip red and black mm Clip red and black 1x6 Square Pin Header Other Accessories for AP033/AP034 AC Coupler ÷10 Attenuator for AP033 ÷10 Attenuator for AP034 ÷20 Attenuator for AP034
ORDERING INFORMATION 1 GHz Active Differential Probe ÷1, ÷10, ÷20 500 MHz Active Differential Probe x10, ÷1, ÷10 or ÷100

DIFFERENTIAL PROBES

AP034/AP033 ±200 VDC continuous m 0 °C to 50 °C ÷10 Plug-on Attenuator ÷20 Plug-on Attenuator AP034 only Plug-on AC Coupler Flex Lead Set 1 Input ‘Y’ Lead 1 Mini Clip, mm 3 Mini Clip, mm 2 Ground Lead 1 Offset Pins, Round 4 Square Pin Header Strip 1 year

AP03X-FLEX-LEAD NA AP03X-OFFSET-PIN PK006-3 PK006-4 NA

AP03X-AC-COUPLER AP033-ATTN AP034-DA10 AP034-DA20

PRODUCT CODE

AP034 AP033
264 1-800-5-LeCroy

PROBES AND PROBE ACCESSORIES

HIGH VOLTAGE PASSIVE PROBES

The PPE series includes five fixed-attenuation probes covering a range from 2 kV to 20 kV, and one switchable probe providing ÷10/÷100 attenuation for voltage inputs up to kV. All fixed-attenuation, standard probes automatically rescale compatible LeCroy oscilloscopes for the appropriate attenuation of the probe.

Features
• Safe, accurate high-voltage measurement
• kV to 20 kV

HIGH-VOLTAGE PROBES SELECTION GUIDE SPECIFICATIONS

Types

Bandwidth Input R Input C Attenuation Maximum Probe Cable

MHz Ω pF

Voltage Encoding

PPE1.2kV* 400 50 M < 6 ÷10 / ÷100 600 V/1.2 kV No 2 m

PPE2kV*
400 50 M < 6
÷100

Yes 2 m

PPE4kV*
400 50 M < 6
÷100

Yes 2 m

PPE5kV*
400 50 M < 6
÷100

Yes 2 m

PPE6kV*
400 50 M < 6
÷1000

Yes 2 m

PPE20kV†
100 50 M < 2
÷1000
20 kV

Yes 3 m
40 KV peak
ORDERING INFORMATION
÷10/÷100 200/300 MHz 5 MΩ/50 MΩ High-Voltage Probe 600 V/1.2 kV max. Voltage DC ÷1000 100 MHz 50 MΩ High-Voltage Probe 20 kV 40 kV Peak max. Voltage DC and Peak AC ÷100 400 MHz 50 MΩ High-Voltage Probe 2 kV max. Voltage DC and Peak AC ÷100 400 MHz 50 MΩ High-Voltage Probe 4 kV max. Voltage DC and Peak AC ÷100 400 MHz 50 MΩ High-Voltage Probe 5 kV max. Voltage DC and Peak AC ÷1000 400 MHz 50 MΩ High-Voltage Probe 6 kV max. Voltage DC and Peak AC Accessory Kit for PPE1.2kV, 2kV, 4kV, 5kV, and 6kV Standard Probe Accessory Kit for PPE20kV Ground Lead 15 cm Hook Standard Probe Accessory Kit for PPE1.2kV, PPE2kV Sprung Hook red Ground Lead 22 cm Crocodile Clip Probe Tip to BNC Adapter IC Insulating Tip Screw Driver Probe Tip to Banana Plug Adapter Ground Lead with Banana Plug Spring Tip mm Rigid Tip V2A

PRODUCT CODE PPE1.2KV

PPE20KV

PPE2KV

PPE4KV

PPE5KV

PPE6KV

PK103 PK104-1 PK104-2 PK103-1 PP005-G22 PK30x-2 PP005-BNC

PP005-ST8 PP005-RT

STANDARD ACCESSORY KIT FOR PPE20KV Ground Lead 15 cm Hook

PK104-1 PK104-2

Supplied with probe:
* Probe Kit Trimming tool, ground lead, rigid tip, IC insulator, BNC adapter, tip insulator, spring hook, red crocodile clip.
4mm safety ground lead, and green/yellow crocodile clip. † Probe Kit trimming tool, and ground lead with a crocodile clip.

PPE1.2KV PPE2KV PPE4KV PPE5KV PPE6KV PPE20KV

PROBES AND PROBE ACCESSORIES

PROBES AND PROBE ACCESSORIES

APO31

ADP305 ADP300

HIGH VOLTAGE DIFFERENTIAL PROBES

The AP031 is a low cost, battery operated active differential probe intended for measuring higher voltages. The differential techniques employed permit measurements to be taken at two points in a circuit without reference to the ground, allowing the oscilloscope to be safely grounded without the use of opto-isolators or isolating transformers.

Features
• Safe floating measurements
• 15 MHz bandwidth
• 700 V maximum input voltage
• Works with any 1 MΩ input oscilloscope

SPECIFICATIONS Attenuation Bandwidth Input R Differential Mode Range Common Mode Range CMRR Power Source four AA batteries
÷10 / ÷100 15 MHz 4 MΩ ±70 V / ±700 V DC + Peak AC ±700 V DC + Peak AC 86 dB 50 Hz 56 dB 200 kHz
ORDERING INFORMATION 700 V, 15 MHz Differential Probe ÷10, ÷100

PRODUCT CODE AP031

ADP30X high-voltage active probes are safe, easy-to-use, and ideally suited for measuring power electronics. The ADP300 is designed for troubleshooting low-frequency power devices and other circuits where the reference potential is elevated from the ground or the location of the ground is unknown. The ADP305 is designed for measuring the high-speed floating voltages found in today’s power electronics.

Features
• 20 MHz and 100 MHz bandwidth
• 1,000 V rms common mode voltage
• 1,400 V peak differential voltage
• EN 61010 CAT III
• 80 dB CMRR at 50/60 Hz
• ProBus system
• Full remote control
266 1-800-5-LeCroy

PROBES AND PROBE ACCESSORIES

HIGH VOLTAGE DIFFERENTIAL PROBES

SPECIFICATIONS ELECTRICAL CHARACTERISTICS Bandwidth

Differential Voltage Common Mode Voltage Low-Frequency Accuracy probe only CMRR

Max. Slew Rate referenced to input

AC Noise referenced to input Attenuation Input Impedance

Sensitivity

Interface
20 MHz ADP300
100 MHz ADP305
1,400 V peak
1,000 V rms CAT III
1% of Reading
50/60 Hz
80 dB 10,000:1
100 kHz
50 dB 300:1
60,000 V/µs ADP300
300,000 V/µs ADP305
50 mV rms
÷100/÷1000 automatically selected by scope

Between inputs
8 MΩ, 6 pF

Each input to ground 4 MΩ, 1 pF
1 V/div to 350 V/div ADP300
200 mV/div to 350 V/div ADP305

ProBus, 1 MΩ*

GENERAL CHARACTERISTICS Overall Length Input Connectors Operating Temperature Warranty
2m 4 mm Shrouded Banana Plug 0 to 50 1 year

STANDARD ACCESSORIES ADP305

All ADP300 Accessories Safety Spade 1 Red, 1 Blue Plunger Clamp Clip 1 Red, 1 Blue Plunger Jaw Clip 1 Red, 1 Blue Safe Alligator Clip 1 Red, 1 Blue Soft Accessory Case

ADP300
*Requires AP-1M for oscilloscopes with 50 Ω only inputs

Instruction Manual Certification of Calibration Plunger Hook Clip 1 Red, 1 Blue Straps for Holding Probe
ORDERING INFORMATION
1,400 V, 100 MHz High-Voltage Differential Probe 1,400 V, 20 MHz High-Voltage Differential Probe

PRODUCT CODE

ADP305 ADP300

PROBES AND PROBE ACCESSORIES

PROBES AND PROBE ACCESSORIES

CURRENT PROBES
268 1-800-5-LeCroy

Accurately measure AC, DC, and impulse currents.

MEASURE CURRENTS IN A WIDE RANGE OF APPLICATIONS

Measuring AC and DC Currents LeCroy current probes do not require the breaking of a circuit or the insertion of a shunt to make accurate and reliable current measurements. Based on a combination of Hall effect and transformer technology, LeCroy current probes are ideal for making accurate AC, DC, and impulse current measurements.

Fully Integrated with Oscilloscope Many current probes require external power supplies or amplifiers to display a waveform on the oscilloscope screen. All LeCroy current probes are powered through the LeCroy ProBus connection and require no additional hardware. Along with providing power, the ProBus connection allows the current probe and oscilloscope to communicate, resulting in current waveforms automatically displayed on screen in Amps, and calculated power traces scaled correctly in Watts. This full integration also allows for Degauss and Autozero functions to be done directly from the oscilloscope with a single button press.

Applications LeCroy current probes are available in a wide range of models for a wide range of applications. The full range of LeCroy current probes includes models with bandwidths up to 100 MHz, peak currents up to 700 A and sensitivities to 10 mA/div. Multiple current probes can be used together to make measurements on three-phase systems, or a single current probe can be used with a voltage probe to make accurate instantaneous power measurements. LeCroy current probes are often used in applications such as the design and test of switching power supplies, motor drives, electric vehicles, and uninterruptible power supplies.

PROBES AND PROBE ACCESSORIES

CURRENT PROBES

CP031 30A, 100 MHz The CP031 is LeCroy’s highest bandwidth current probe. Along with the high 100 MHz bandwidth the CP031can probe continuous currents of 30 Arms and peak currents up to 50 A. The CP031 features a small form factor making it easier to probe on a crowded, compact board.

Features
• 100 MHz bandwidth
• Small form factor accommodates large conductors with small jaw size
• 30 Arms continuous current, 50 Apeak current

CP030 30 A, 50 MHz The CP030 was designed with a small form factor for today’s crowded boards. The small jaw can probe currents in tight spaces and still clamp onto conductors up to 5 mm in diameter. Continuous currents of 30 A rms and peak currents of 50 A can be measured by the CP030, which also features a 50 MHz bandwidth.

Features
• Small form factor accommodates large conductors with small jaw size
• 30 Arms continuous current, 50 MHz bandwidth
• 50 Apeak current

AP015 30 A, 50 MHz The AP015 current probe can measure continuous current of 30 A rms and peak pulses of up to 50 A for durations up to 10 seconds. This probe also features an overheating protection circuit, which will display an on-screen warning to the user to prevent damage. A probe unlock detection feature is also built in to the AP015 to ensure accurate measurements.

Features
• 30 Arms continuous current, 50 MHz bandwidth
• 50 Apeak current for up to 10 seconds
• Overheating and Probe Unlock Detection

CP150 150 A, 10 MHz Features
• 150 Arms continuous current
• 500 Apeak
• 10 MHz bandwidth

CP500 500 A, 2 MHz Features
• 500 Arms continuous current
• 700 Apeak
• 2 MHz bandwidth

CP031 CP030 AP015 CP150

PROBES AND PROBE ACCESSORIES

CP500 269

PROBES AND PROBE ACCESSORIES

SPECIFICATIONS

ELECTRICAL CHARACTERISTICS Max. Continuous Input Current Bandwidth Max. Peak Current at Pulse Width Rise Time typical Minimum Sensitivity Max. In-Phase Current Low-Frequency Accuracy AC Noise Coupling

CURRENT PROBES

CP031*†

CP030*†
30 A 100 MHz 50 A 10 µs ns 20 mA/div 1% mA AC, DC, GND
30 A 50 MHz 50 A 10 µs 7 ns 20 mA/div 1% mA AC, DC, GND

GENERAL CHARACTERISTICS Cable Length Weight Max. Conductor Size diameter Interface Usage Environment Operating Temperature Max. Relative Humidity Max. Altitude Maximum Insulated Wire Voltage
m 240 g 5 mm ProBus, 1 MΩ Indoor 0 to 40 80% 2000 m 300 V CAT I, 150 V CAT II
m 240 g 5 mm ProBus, 1 MΩ Indoor 0 to 40 80% 2000 m 300 V CAT I
* Guaranteed at 23 °C ±3 °C
† The CP031 and CP030 are compatible with LeCroy X-Stream oscilloscopes running firmware version or greater. Requires AP-1M for use with 50 Ω input only oscilloscopes.
ORDERING INFORMATION PRODUCT CODE
30 A 100 MHz Current Probe AC/DC 30 Arms 50 Apeak Pulse 30 A 50 MHz Current Probe AC/DC 30 Arms 50 Apeak Pulse 30 A 50 MHz Current Probe AC/DC 30 Arms 50 Apeak Pulse 150 A 10 MHz Current Probe AC/DC 150 Arms 500 Apeak Pulse 500 A 2 MHz Current Probe AC/DC 500 Arms 700 Apeak Pulse

CP031 CP030 AP015 CP150 CP500

CP031 30 A, 100 MHz
20 Current Arms

Frequency Hz

Maximum Input Current vs. Frequency

CP031 30 A, 100 MHz
1 Insertion Impedance

Frequency Hz

Insertion Impedance vs. Frequency typical
1-800-5-LeCroy

CP030 30 A, 50 MHz
20 Current Arms

Frequency Hz

Maximum Input Current vs. Frequency

CP030 30 A, 50 MHz
1 Insertion Impedance

Frequency Hz

Insertion Impedance vs. Frequency typical

PROBES AND PROBE ACCESSORIES

CURRENT PROBES

AP015

CP150
30 A 50 MHz 50 A 10 s 7 ns 10 mA/div 1%

AC, DC, GND
150 A 10 MHz 500 A 30 µs < 35 ns 200 mA/div 500 A 1% 25 mA AC, DC, GND

CP500
500 A 2 MHz 700 A < 175 ns 200 mA/div 1150 A 1% 25 mA AC, DC, GND
2m 300 g 5 mm ProBus, 1 MΩ Indoor 0 to 40 80% 2000 m 300 V CAT I
2m 500 g 20 mm ProBus, 1 MΩ Indoor 0 to 40 80% 2000 m 600 V CAT II, 300 V CAT III
6m 630 g 20 mm ProBus, 1 MΩ Indoor 0 to 40 80% 2000 m 600 V CAT II, 300 V CAT III
* Guaranteed at 23 °C ±3 °C
† The CP031 and CP030 are compatible with LeCroy X-Stream oscilloscopes running firmware version or greater. Requires AP-1M for use with 50 Ω input only oscilloscopes.

CP150 150 A, 10 MHz

Current A rms

Frequency Hz

Maximum Input Current vs. Frequency

CP500 500 A, 2 MHz

Current 300 A rms 250
100 k
ORDERING INFORMATION

Probe Deskew and Calibration Fixture Included ProLink Extender 48" 50 ohm Cable with Male SMA Connectors Calibration Certificate Operator’s Manual Soft Accessory Case

PRODUCT CODE TF-DSQ
272 1-800-5-LeCroy

PROBES AND PROBE ACCESSORIES

EZ PROBE POSITIONER

The EZ-Probe Positioner provides stable, accurate X, Y and Z positioning in one fluid motion. Its unique 3-D joystick, with 3:1 motion reduction and single-clutch, fullyarticulating arm, allow simple, precise positioning in anything from card cages to MCMs. Any current handheld probes can be easily attached, facilitating the measurement process and ensuring more precise connectivity.
ORDERING INFORMATION Cascade Microtech EZ-Probe Positioner

PRODUCT CODE EZ PROBE

EZ PROBE

ADPPS

Power Adapter for AP033, AP034 and HFP1000 Active Probes allows the probe’s output to be connected to other non-ProBus test equipment, including spectrum and network analyzers.
ORDERING INFORMATION

ProBus-to-BNC and Power Adapter for AP033, AP034, and HFP Series BW limited to 1 GHz

PRODUCT CODE ADPPS

ADPPS

TRANSIT CASE

Soft Accessory Case for inside flap for storing manuals, plus roomy interior for a probe and its many accessories.
ORDERING INFORMATION Soft Accessory Case for Probes

PRODUCT CODE SAC-01

SAC-01

PROBES AND PROBE ACCESSORIES

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived D11000SI Datasheet file may be downloaded here without warranties.

Datasheet ID: D11000SI 645506