PROTO-USBDEVELKIT
PROTO-USBDEVELKIT Datasheet
The USB demonstration kit provides easy to use hardware and software for evaluation of MEAS pressure sensor. The software allows basic graphing and logging of the row and calibrated pressure and temperature as well as altitude data. The software interface also shows the sensor calibration words and provides tunable averaging of the measured data.
| Part | Datasheet |
|---|---|
PROTO-USBDEVELKIT |
PROTO-USBDEVELKIT (pdf) |
| PDF Datasheet Preview |
|---|
| USBDEVELKIT DEVELOPMENT KIT V3 • USB interface • Back auxiliary connector for external sensors • RoHS-compatible & Pb-free • Flash software upgradeable through USB • Software compatible with windows 7 / XP • Recording software The USB demonstration kit provides easy to use hardware and software for evaluation of MEAS pressure sensor. The software allows basic graphing and logging of the row and calibrated pressure and temperature as well as altitude data. The software interface also shows the sensor calibration words and provides tunable averaging of the measured data. • Supply voltage from USB • Graphing and data logging software • Fast measurement rate up to ~25 samples/s • Demonstrator for future products • Sample board for each sensors • 0°C to +50°C operation temperature PACKAGE CONTENT • 1 USB developer key • Samples boards on request. • 1 Software driver and manual on Compact Disk CD USBDEVELKIT DEVELOPMENT KIT V3_001 000USBDK2034 ECN1444 August 8, 2013 USBDEVELKIT DEVELOPMENT KIT V3 ABSOLUTE MAXIMUM RATINGS Parameter Supply voltage Storage temperature Symbol USBVDD TS Conditions Ta = 25 oC Max Unit Notes NOTE 1 Storage and operation in an environment of dry and non-corrosive gases. RECOMMANDED OPERATION CONDITIONS Ta = 25°C, VDD = V unless noted otherwise Parameter Symbol Conditions Min. Typ. Max Unit Supply voltage Supply current, Active Idle Update speed. Operating temperature range Internal Self Test Key VDDUSB IActive IIdle VDD = V Actual 25 Hz performance may vary 1 with time and computer P_error +25 +50 +/-5 °C mBar FUNCTION GENERAL The USB DEVEL module is meant for evaluation of new and future pressure sensor modules from MEAS Switzerland Sàrl. The module and software will allow the user to see the raw and calibration data read from the sensor as well the calculated pressure and altitude derived from those data. HUMIDITY, WATER PROTECTION The USB DEMO module case does not provide special water protection. LIGHT SENSITIVITY The USB DEMO module should provide adequate light protection for most indoor and outdoor lightning situations. ESD PRECAUTIONS Some ESD suppressor diodes help protect against the risks due to electrostatic discharges on the USB port connectors up to 2kV direct discharge. USBDEVELKIT DEVELOPMENT KIT V3_001 000USBDK2034 ECN1444 ORDERING INFORMATION Product USB DEVELOPMENT KIT PCB Internal connection Part Number / Art. Number PROTO-USBDEVELKIT PROTO-PCBDEVELBRD FACTORY CONTACTS NORTH AMERICA Measurement Specialties 45738 Northport Loop West Fremont, CA 94538 Tel +1 800 767 1888 Fax +1 510 498 1578 e-mail pfg.cs.amer chameas- spec.com Website: EUROPE MEAS Switzerland Sàrl Ch. Chapons-des-Prés 11 CH-2022 Bevaix Tel +41 32 847 9550 Fax + 41 32 847 9569 e-mail sales.chameas-spec.com Website: ASIA Measurement Specialties China , Ltd. No. 26 Langshan Road Shenzhen High-Tech Park North Nanshan District, Shenzhen, 518057 China Tel +86 755 3330 5088 Fax +86 755 3330 5099 e-mail pfg.cs.asiaameas-spec.com Website: USBDEVELKIT DEVELOPMENT KIT V3_001 000USBDK2034 ECN1444 August 8, 2013 |
| More datasheets: MDM-15PH002L | 50036WT | LTST-T680UBKT | BSM35GP120BOSA1 | M38999/10-12B | M38999/10-10B | M38999/10-18B | M38999/10-14B | DA15S | SPB800-BCP1 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PROTO-USBDEVELKIT Datasheet file may be downloaded here without warranties.