5525DSO-SB001GS
5525DSO-SB001GS Datasheet
SENSOR SOLUTIONS ///MS5525DSO
| Part | Datasheet |
|---|---|
5525DSO-SB001GS |
5525DSO-SB001GS (pdf) |
| PDF Datasheet Preview |
|---|
| SENSOR SOLUTIONS ///MS5525DSO MS5525DSO Digital Small Outline SPECIFICATIONS • Integrated Digital Pressure Sensor 24-bit ADC • Fast Conversion Down to 1 ms • Low Power, 1 µA standby < µA • Supply Voltage to 3.6V • Pressure Range 1 to 30 PSI • I2C and SPI Interface The MS5525DSO is a new generation of Digital Small Outline pressure sensors from MEAS with SPI and I2C bus interface designed for high volume OEM users. The sensor module includes a pressure sensor and an ultra low power 24-bit ADC with internal factory calibrated coefficients. It provides a 24-bit digital pressure and temperature value and different operation modes that allow the user to optimize for conversion speed and current consumption. The MS5525DSO can be interfaced to virtually any microcontroller. The communication protocol is simple, without the need of programming internal registers in the device. This new sensor module generation is based on leading MEMS technology and latest benefits from TE proven experience and know-how in high volume manufacturing of pressure modules, which have been widely used for over a decade. The rugged engineered thermoplastic transducer is available in single and dual port configurations, and can measure absolute, gauge, compound, and differential pressure from 1 to 30psi. 06/2017 MS5525DSO Digital Small Outline • Small Outline IC Package • Barbed Pressure Ports • Low Power, High Resolution ADC • Digital Pressure and Temperature Outputs • Factory Automation • Altitude and Airspeed Measurements • Medical Instruments • Leak Detection STANDARD RANGES PSI FS Pressure 1 2 5 15 30 Absolute DB, DH,FT DB, DH,FT Gauge DB, SB, ST, DH,FT DB, SB, ST, DH,FT DB, SB, ST, DH,FT DB, SB, ST, DH,FT DB, SB, ST, DH,FT Differential DB, SB,ST, DH DB, SB,ST, DH DB, SB,ST ,DH DB, DH DB, DH See Package Configurations DB= Dual Barb, DH= Dual Hole, SB=Single Barb, ST=Single Tube, FT=Front Side Tube SENSOR SOLUTIONS ///MS5525DSO 06/2017 MS5525DSO Digital Small Outline ABSOLUTE MAXIMUM RATING Parameter Supply Voltage Storage Temperature Overpressure Burst Pressure ESD Solder Temperature Conditions TA = 25°C TA = 25 °C, both Ports TA = 25 °C, Port 1 HBM 250°C, 5 sec max. Table 1- BURST PRESSURE BY RANGE AND PORT DESIGNATION. Range 001 002 005 015 030 Port 1 10 20 50 120 Port 2 10 20 15 60 120 Unit Symbol/Notes See Table 1 EN 61000-4-2 Unit psi ENVIRONMENTAL SPECIFICATIONS Parameter Mechanical Shock Mechanical Vibration Thermal Shock Life MTTF Conditions Mil Spec 202F, Method 213B, Condition C, 3 Drops Mil Spec 202F, Method 214A, Condition 1E, 1Hr Each Axis 100 Cycles over Storage Temperature, 30 minute dwell 1 Million FS Cycles >10Yrs, 70 ºC, 1 Million Pressure Cycles, 120%FS Pressure SENSOR SOLUTIONS ///MS5525DSO ORDERING INFORMATION 5525DSO Model - Package Style MS5525DSO - DB = Dual Barb SB = Single Barb ST = Single Tube DH = Dual Hole FT = Front Tube Pressure Range Pressure Type A = Absolute D = Differential G = Gauge S Pin Style S = Gull Wing NORTH AMERICA Measurement Specialties, Inc., a TE Connectivity company Tel 800-522-6752 Email: EUROPE Measurement Specialties Europe , Ltd., a TE Connectivity Company Tel 800-440-5100 Email: ASIA Measurement Specialties China Ltd., a TE Connectivity company Tel 0400-820-6015 Email: TE.com/sensorsolutions Measurement Specialties, Inc., a TE Connectivity company. Measurement Specialties, TE Connectivity, TE Connectivity logo and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. 2015 TE Connectivity Ltd. family of companies All Rights Reserved. SENSOR SOLUTIONS ///MS5525DSO 06/2017 Page 22 |
| More datasheets: HR30-6PA-6P(71) | HR30-6R-6SD(71) | HR30-6R-6PD(71) | HR30-8R-12SD(71) | HR30-SC-111 | HR30-PC-211 | HR30-PC-111 | HR30-8P-T02 | HT102/HR30-1 | HR30-6R-3P-T01 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 5525DSO-SB001GS Datasheet file may be downloaded here without warranties.