3052-002-P

3052-002-P Datasheet

Model 3052

Part	Datasheet
3052-002-P	3052-002-P (pdf)

Related Parts	Information
3052-005-P	3052-005-P
3052-050-P	3052-050-P
3052-100-P	3052-100-P
3052-010-P	3052-010-P
3052-020-P	3052-020-P

PDF Datasheet Preview
Model 3052 PC Board Mountable Accelerometer Millivolt Output Integral Temperature Compensation Vibration/Shock Monitoring Modal Analysis Motion Control Crash Testing Aerospace Adhesive Mount Non-linearity Typical Temperature Performance Typical Dc Response Built-in Damping Built-in Overrange Stops Low Power STANDARD RANGES Range Range ±20 ±50 ±10 ±100 The Model 3052 is a piezoresistive silicon accelerometer with integral temperature compensation. It is packaged on a ceramic substrate with an epoxy sealed ceramic cover and is designed for adhesive mounting. The accelerometer consists of a micro machined silicon mass suspended by multiple beams from a silicon frame. Piezoresistors located in the beams change their resistance as the motion of the suspended mass changes the strain in the beams. Silicon caps on the top and bottom of the device are added to provide over-range stops. This design provides for a very low profile, high shock resistance, durability and built-in damping over a wide usable bandwidth. Each sensor is individually serialized. For an accelerometer with a mounting bracket which can be used to bolt the sensor to the mounting location see the Model For uncompensated accelerometers, please refer to the Models 3022 and 2-20 Accelerometer Unamplified PC Board Mountable Accelerometer CALIBRATION DATA Model 3052 Figure Calibration Data Sheet A calibration data sheet similar to the sample shown above is included with each unit. The calibration sheet provides the measured test and calibration data for the sensor. CONNECTIONS Accelerometer Unamplified PIN NUMBER 1 2 3 4 5 RESISTOR R1 R2 R3 R5 R6 R7 FUNCTION Rzb Rset Rlo Rhi Rstc Rztc FUNCTION GROUND ICS USE ONLY SUPPLY -OUTPUT +OUTPUT OHMS 10-50 250-350 800-1250 7.5K-50K 3K-99K 0.15M-4M April 2000 2-21 Model 3052 PC Board Mountable Accelerometer PERFORMANCE SPECIFICATIONS Supply Voltage VDC Ambient Temperature 25°C Unless otherwise specified PARAMETERS Frequency Response [MIN] Mounted Resonant Frequency [MIN] Sensitivity MIN/MAX ±2g 0-250 RANGE ±5g 0-300 ±10g 0-400 1000 UNITS Hz mV/g NOTES 1, 2 1, 3 PARAMETERS Frequency Response [MIN] Mounted Resonant Frequency [MIN] Sensitivity MIN/MAX ORDERING INFORMATION 3052 - 005 - P Electrical Connection P = Pins Acceleration Range Model 20 - 500 g ± ± ± ± ± ± Accelerometer Unamplified Feel free to contact customer service with any questions at Toll free 1 800 745-8008 Phone 757 766-1500 Fax 757 766-4297 April 2000 2-23

PDF Datasheet Preview

Model 3052

PC Board Mountable Accelerometer Millivolt Output Integral Temperature Compensation

Vibration/Shock Monitoring Modal Analysis Motion Control Crash Testing Aerospace

Adhesive Mount Non-linearity Typical Temperature Performance Typical Dc Response Built-in Damping Built-in Overrange Stops Low Power

STANDARD RANGES

Range

Range
±20
±50
±10
±100

The Model 3052 is a piezoresistive silicon accelerometer with integral temperature compensation. It is packaged on a ceramic substrate with an epoxy sealed ceramic cover and is designed for adhesive mounting.

The accelerometer consists of a micro machined silicon mass suspended by multiple beams from a silicon frame. Piezoresistors located in the beams change their resistance as the motion of the suspended mass changes the strain in the beams. Silicon caps on the top and bottom of the device are added to provide over-range stops. This design provides for a very low profile, high shock resistance, durability and built-in damping over a wide usable bandwidth. Each sensor is individually serialized.

For an accelerometer with a mounting bracket which can be used to bolt the sensor to the mounting location see the Model For uncompensated accelerometers, please refer to the Models 3022 and
2-20

Accelerometer Unamplified

PC Board Mountable Accelerometer CALIBRATION DATA

Model 3052

Figure Calibration Data Sheet A calibration data sheet similar to the sample shown above is included with each unit. The calibration sheet provides the measured test and calibration data for the sensor.

CONNECTIONS

Accelerometer Unamplified

PIN NUMBER 1 2 3 4 5

RESISTOR R1 R2 R3 R5 R6 R7

FUNCTION Rzb Rset Rlo Rhi Rstc Rztc

FUNCTION GROUND ICS USE ONLY SUPPLY -OUTPUT +OUTPUT

OHMS 10-50 250-350 800-1250 7.5K-50K 3K-99K 0.15M-4M

April 2000
2-21

Model 3052

PC Board Mountable Accelerometer

PERFORMANCE SPECIFICATIONS

Supply Voltage VDC Ambient Temperature 25°C Unless otherwise specified

PARAMETERS Frequency Response [MIN] Mounted Resonant Frequency [MIN] Sensitivity MIN/MAX
±2g 0-250

RANGE
±5g 0-300
±10g 0-400 1000

UNITS Hz
mV/g

NOTES 1, 2 1, 3

PARAMETERS Frequency Response [MIN] Mounted Resonant Frequency [MIN] Sensitivity MIN/MAX
ORDERING INFORMATION
3052 - 005 - P

Electrical Connection P = Pins Acceleration Range Model
20 - 500 g
± ±
± ±
± ±

Accelerometer Unamplified

Feel free to contact customer service with any questions at Toll free 1 800 745-8008 Phone 757 766-1500 Fax 757 766-4297

April 2000
2-23

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 3052-002-P Datasheet file may be downloaded here without warranties.

Datasheet ID: 3052-002-P 647599