HAL APV V5.1
HAL APV V5.1 Datasheet
8xy, HAL 100x
| Part | Datasheet |
|---|---|
HAL APV V5.1 |
HAL APV V5.1 (pdf) |
| PDF Datasheet Preview |
|---|
| Application Note 8xy, HAL 100x Programmer Board APN000046_03EN Edition Sept. 19, 2013 HAL8xy, HAL100x Programmer Board APPLICATION NOTE Copyright, Warranty, and Limitation of Liability The information and data contained in this document are believed to be accurate and reliable. The software and proprietary information contained therein may be protected by copyright, patent, trademark and/or other intellectual property rights of Micronas. All rights not expressly granted remain reserved by Micronas. Micronas assumes no liability for errors and gives no warranty representation or guarantee regarding the suitability of its products for any particular purpose due to these specifications. By this publication, Micronas does not assume responsibility for patent infringements or other rights of third parties which may result from its use. Commercial conditions, product availability and delivery are exclusively subject to the respective order confirmation. Any information and data which may be provided in the document can and do vary in different applications, and actual performance may vary over time. Do not use our products in life-supporting systems, military, aviation, or aerospace applications! Unless explicitly agreed to otherwise in writing between the parties, Micronas’ products are not designed, intended or authorized for use as components in systems intended for surgical implants into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the product could create a situation where personal injury or death could occur. No part of this publication may be reproduced, photocopied, stored on a retrieval system or transmitted without the express written consent of Micronas. Micronas Trademarks HAL Micronas Patents Sensor programming with VDD-Modulation protected by Micronas Patent No. EP 0 953 Third-Party Trademarks All other brand and product names or company names may be trademarks of their respective companies. Sept. 19, 2013 APN000046_03EN Micronas APPLICATION NOTE HAL8xy, HAL100x Programmer Board Contents Section Introduction Features Supported Micronas Hall-Effect Sensors Functional Description Software Firmware Power-On Self-Test The COM Port Parameters Connectors Pinning of the Interface Connector LED Description Error Flag Codes Usage of the Hall Programmer V Tips for Safe Programming of the Sensors Recommended Operating Conditions Recommended Wiring Maintenance and Calibration Firmware Update Operation Mode 0 Definition of the Protocol The Board Commands BCMD Monitoring of the Programming Voltage Programming of the Sensor Definition of Programming Pulses Definition of the Telegram Codes Number Formats Register Information HAL805/HAL815/HAL817 Programming Information Data Formats The Programming Procedure The Calibration Procedure Operation Mode 1 Definition of the Protocol The Board Commands BCMD HAL805, HAL815, HAL817, HAL810 and HAL1000 HAL82x, HAL83x, HAL880, HAL1002 Monitoring of the Programming Voltage Programming of the Sensor Definition of Programming Pulses Definition of the Telegram Codes Number Formats Register Information HAL805 / HAL815 / HAL817 Register Information HAL82x / HAL83x / HAL880 / HAL1002 Programming Information Data Formats The Programming Procedure Programming Procedure for HAL805, HAL810, HAL815, HAL817 and HAL1000 The Calibration Procedure Programming Procedure for HAL82x, HAL83x, HAL880 and HAL1002 The Calibration Procedure Micronas Sept. 19, 2013 APN000046_03EN HAL8xy, HAL100x Programmer Board Contents, continued 62 63 64 66 67 71 72 73 75 76 77 78 79 Section Operation Mode 2 Definition of the Protocol The Board Commands BCMD Monitoring of the Supply Voltage Programming of the Sensor Definition of Programming Pulses Definition of the Telegram Codes Number Formats Register Information Programming Information Data Formats The Programming Procedure The Programmable Output Characteristic The Calibration Procedure Operation Mode 3 Definition of the Protocol The Board Commands BCMD |
| More datasheets: SOMAM3517-10-1780FJIR | SOMAM3517-10-1780RJCR | ICS853016AGLF | 853016AMLFT | 853016AMLF | 853016AGLFT | ICS9LPRS419DFLFT | KSC3569YTU | 01250001H | 01250002H |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HALAPVV5.1 Datasheet file may be downloaded here without warranties.