INMP405ACEZ-R7

INMP405ACEZ-R7 Datasheet

INMP405

Part	Datasheet
INMP405ACEZ-R7	INMP405ACEZ-R7 (pdf)

Related Parts	Information
INMP405ACEZ-R0	INMP405ACEZ-R0

PDF Datasheet Preview
INMP405 Omnidirectional Microphone with Bottom Port and Analog Output The INMP405* is a high-quality, high-performance, low-power, analog-output bottom-ported omnidirectional MEMS microphone. The INMP405 consists of a MEMS microphone element, an impedance converter, and an output amplifier. The INMP405 sensitivity specification makes it an excellent choice for near-field applications. The INMP405 has a wideband frequency response, resulting in natural sound with high intelligibility. The specially designed low frequency cutoff reduces wind noise. Its low current consumption enables long battery life for portable applications. The INMP405 complies with the TIA-920 Telecommunications Telephone Terminal Equipment Transmission Requirements for Wideband Digital Wireline Telephones standard. The INMP405 is available in a miniature x mm surface-mount package. It is reflow solder compatible with no sensitivity degradation. The INMP405 is halide free. Protected by U.S. Patents 7,449,356 7,825,484 7,885,423 and Other patents are pending. • Mobile Devices • Teleconferencing Systems • Headsets • Security Panels • Intercom Devices • x mm Surface-Mount Package • SNR of 62 dBA • Sensitivity of −38 dBV • Flat Frequency Response from 200 Hz to 15 kHz • Low Current Consumption <250 µA • Single-Ended Analog Output • High PSR of −70 dBV • Compatible with Sn/Pb and Pb-free Solder Processes • RoHS/WEEE Compliant FUNCTIONAL BLOCK DIAGRAM OUTPUT AMPLIFIER OUTPUT INMP405 POWER VDD GND ORDERING INFORMATION PART INMP405ACEZ-R0 INMP405ACEZ-R7† EV_INMP405-FX * 13” Tape and Reel TEMP RANGE −40°C to +85°C −40°C to +85°C † 7” Tape and reel to be discontinued. Contact for availability. InvenSense reserves the right to change the detail specifications as may be required to permit improvements in the design of its products. InvenSense Inc. 1745 Technology Drive, San Jose, CA 95110 U.S.A +1 408 INMP405 TABLE OF CONTENTS Page 2 of 14 INMP405 SPECIFICATIONS TABLE ELECTRICAL CHARACTERISTICS TA = −40 to 85°C, VDD = to V, unless otherwise noted. All minimum and maximum specifications are guaranteed across temperature and voltage, and are specified in Table 1, unless otherwise noted. Typical specifications are not guaranteed. PARAMETER PERFORMANCE Directionality Sensitivity Signal-to-Noise Ratio SNR Equivalent Input Noise EIN Dynamic Range Frequency Response Total Harmonic Distortion THD Power-Supply Rejection PSR Maximum Acoustic Input POWER SUPPLY Voltage VDD Supply Current IS OUTPUT CHARACTERISTICS Output Impedance ZOUT Output DC Offset Output Current Limit Note 1 See Figure 3 and Figure CONDITIONS 1 kHz, 94 dB SPL −41 Derived from EIN and maximum acoustic input Low frequency −3 dB point High frequency −3 dB point 105 dB SPL 217 Hz, 100 mVp-p square wave superimposed on VDD = V Peak TYP MAX Omni −38 −35 200 15 −70 UNITS NOTES dBV dBA SPL Hz kHz dB SPL V µA Page 3 of 14 INMP405 ABSOLUTE MAXIMUM RATINGS Stress above those listed as Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these conditions is not implied. Exposure to the absolute maximum ratings conditions for extended periods may affect device reliability. TABLE ABSOLUTE MAXIMUM RATINGS PARAMETER Supply Voltage VDD Sound Pressure Level SPL Mechanical Shock Vibration Temperature Range RATING V to V 160 dB 10,000 g Per MIL-STD-883 Method 2007, Test Condition B −40°C to +85°C ESD CAUTION ESD electrostatic discharge sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection circuitry, damage may occur on devices subjected to high energy ESD. Therefore proper ESD precautions should be taken to avoid performance degradation or loss of functionality. Page 4 of 14 SOLDERING PROFILE TEMPERATURE ORDERING GUIDE PART INMP405ACEZ-R01 * INMP405ACEZ-R71† TEMP RANGE PACKAGE −40°C to +85°C 3-Terminal LGA_CAV −40°C to +85°C 3-Terminal LGA_CAV QUANTITY 10,000 1,000 EV_INMP405-FX Flex Evaluation Board * 13” Tape and Reel † 7” Tape and reel to be discontinued. Check with for availability. 1Z = RoHS-Compliant Part Initial Release Updated Compliance Disclaimer INMP405 Page 13 of 14 INMP405 COMPLIANCE DECLARATION DISCLAIMER InvenSense believes the environmental and other compliance information given in this document to be correct but cannot guarantee accuracy or completeness. Conformity documents substantiating the specifications and component characteristics are on file. InvenSense subcontracts manufacturing and the information contained herein is based on data received from vendors and suppliers, which has not been validated by InvenSense. This information furnished by InvenSense, Inc. is believed to be accurate and reliable. However, no responsibility is assumed by InvenSense for its use, or for any infringements of patents or other rights of third parties that may result from its use. Specifications are subject to change without notice. InvenSense reserves the right to make changes to this product, including its circuits and software, in order to improve its design and/or performance, without prior notice. InvenSense makes no warranties, neither expressed nor implied, regarding the information and specifications contained in this document. InvenSense assumes no responsibility for any claims or damages arising from information contained in this document, or from the use of products and services detailed therein. This includes, but is not limited to, claims or damages based on the infringement of patents, copyrights, mask work and/or other intellectual property rights. Certain intellectual property owned by InvenSense and described in this document is patent protected. No license is granted by implication or otherwise under any patent or patent rights of InvenSense. This publication supersedes and replaces all information previously supplied. Trademarks that are registered trademarks are the property of their respective companies. InvenSense sensors should not be used or sold in the development, storage, production or utilization of any conventional or mass-destructive weapons or for any other weapons or life threatening applications, as well as in any other life critical applications such as medical equipment, transportation, aerospace and nuclear instruments, undersea equipment, power plant equipment, disaster prevention and crime prevention equipment. 2014 InvenSense, Inc. All rights reserved. InvenSense, MotionTracking, MotionProcessing, MotionProcessor, MotionFusion, MotionApps, DMP, AAR, and the InvenSense logo are trademarks of InvenSense, Inc. Other company and product names may be trademarks of the respective companies with which they are associated. 2014 InvenSense, Inc. All rights reserved. Page 14 of 14

PDF Datasheet Preview

INMP405

Omnidirectional Microphone with Bottom Port and Analog Output

The INMP405* is a high-quality, high-performance, low-power, analog-output bottom-ported omnidirectional MEMS microphone. The INMP405 consists of a MEMS microphone element, an impedance converter, and an output amplifier. The INMP405 sensitivity specification makes it an excellent choice for near-field applications. The INMP405 has a wideband frequency response, resulting in natural sound with high intelligibility. The specially designed low frequency cutoff reduces wind noise. Its low current consumption enables long battery life for portable applications.

The INMP405 complies with the TIA-920 Telecommunications Telephone Terminal Equipment Transmission Requirements for Wideband Digital Wireline Telephones standard.

The INMP405 is available in a miniature x mm surface-mount package. It is reflow solder compatible with no sensitivity degradation. The INMP405 is halide free.
*Protected by U.S. Patents 7,449,356 7,825,484 7,885,423 and Other patents are pending.
• Mobile Devices
• Teleconferencing Systems
• Headsets
• Security Panels
• Intercom Devices
• x mm Surface-Mount Package
• SNR of 62 dBA
• Sensitivity of −38 dBV
• Flat Frequency Response from 200 Hz to 15 kHz
• Low Current Consumption <250 µA
• Single-Ended Analog Output
• High PSR of −70 dBV
• Compatible with Sn/Pb and Pb-free Solder Processes
• RoHS/WEEE Compliant

FUNCTIONAL BLOCK DIAGRAM

OUTPUT AMPLIFIER

OUTPUT

INMP405

POWER VDD GND
ORDERING INFORMATION

PART

INMP405ACEZ-R0* INMP405ACEZ-R7† EV_INMP405-FX * 13” Tape and Reel

TEMP RANGE
−40°C to +85°C −40°C to +85°C
† 7” Tape and reel to be discontinued. Contact for availability.

InvenSense reserves the right to change the detail specifications as may be required to permit improvements in the design of its products.

InvenSense Inc. 1745 Technology Drive, San Jose, CA 95110 U.S.A
+1 408

INMP405

TABLE OF CONTENTS
Page 2 of 14

INMP405

SPECIFICATIONS

TABLE ELECTRICAL CHARACTERISTICS

TA = −40 to 85°C, VDD = to V, unless otherwise noted. All minimum and maximum specifications are guaranteed across temperature and voltage, and are specified in Table 1, unless otherwise noted. Typical specifications are not guaranteed.

PARAMETER PERFORMANCE Directionality Sensitivity Signal-to-Noise Ratio SNR Equivalent Input Noise EIN

Dynamic Range

Frequency Response

Total Harmonic Distortion THD

Power-Supply Rejection PSR

Maximum Acoustic Input POWER SUPPLY Voltage VDD Supply Current IS OUTPUT CHARACTERISTICS

Output Impedance ZOUT

Output DC Offset Output Current Limit

Note 1 See Figure 3 and Figure

CONDITIONS
1 kHz, 94 dB SPL
−41

Derived from EIN and maximum acoustic input Low frequency −3 dB point High frequency −3 dB point 105 dB SPL 217 Hz, 100 mVp-p square wave superimposed on VDD = V Peak

TYP MAX

Omni
−38
−35
200 15
−70

UNITS NOTES
dBV dBA SPL

Hz kHz
dB SPL

V µA

Page 3 of 14

INMP405

ABSOLUTE MAXIMUM RATINGS

Stress above those listed as Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these conditions is not implied. Exposure to the absolute maximum ratings conditions for extended periods may affect device reliability.

TABLE ABSOLUTE MAXIMUM RATINGS

PARAMETER Supply Voltage VDD Sound Pressure Level SPL Mechanical Shock Vibration Temperature Range

RATING V to V 160 dB 10,000 g Per MIL-STD-883 Method 2007, Test Condition B −40°C to +85°C

ESD CAUTION

ESD electrostatic discharge sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection circuitry, damage may occur on devices subjected to high energy ESD. Therefore proper ESD precautions should be taken to avoid performance degradation or loss of functionality.

Page 4 of 14

SOLDERING PROFILE

TEMPERATURE
ORDERING GUIDE

PART INMP405ACEZ-R01 *

INMP405ACEZ-R71†

TEMP RANGE PACKAGE −40°C to +85°C 3-Terminal LGA_CAV
−40°C to +85°C 3-Terminal LGA_CAV

QUANTITY 10,000
1,000

EV_INMP405-FX

Flex Evaluation Board
* 13” Tape and Reel
† 7” Tape and reel to be discontinued. Check with for availability. 1Z = RoHS-Compliant Part

Initial Release

Updated Compliance Disclaimer

INMP405

Page 13 of 14

INMP405

COMPLIANCE DECLARATION DISCLAIMER

InvenSense believes the environmental and other compliance information given in this document to be correct but cannot guarantee accuracy or completeness. Conformity documents substantiating the specifications and component characteristics are on file. InvenSense subcontracts manufacturing and the information contained herein is based on data received from vendors and suppliers, which has not been validated by InvenSense.

This information furnished by InvenSense, Inc. is believed to be accurate and reliable. However, no responsibility is assumed by InvenSense for its use, or for any infringements of patents or other rights of third parties that may result from its use. Specifications are subject to change without notice. InvenSense reserves the right to make changes to this product, including its circuits and software, in order to improve its design and/or performance, without prior notice. InvenSense makes no warranties, neither expressed nor implied, regarding the information and specifications contained in this document. InvenSense assumes no responsibility for any claims or damages arising from information contained in this document, or from the use of products and services detailed therein. This includes, but is not limited to, claims or damages based on the infringement of patents, copyrights, mask work and/or other intellectual property rights.

Certain intellectual property owned by InvenSense and described in this document is patent protected. No license is granted by implication or otherwise under any patent or patent rights of InvenSense. This publication supersedes and replaces all information previously supplied. Trademarks that are registered trademarks are the property of their respective companies. InvenSense sensors should not be used or sold in the development, storage, production or utilization of any conventional or mass-destructive weapons or for any other weapons or life threatening applications, as well as in any other life critical applications such as medical equipment, transportation, aerospace and nuclear instruments, undersea equipment, power plant equipment, disaster prevention and crime prevention equipment.
2014 InvenSense, Inc. All rights reserved. InvenSense, MotionTracking, MotionProcessing, MotionProcessor, MotionFusion, MotionApps, DMP, AAR, and the InvenSense logo are trademarks of InvenSense, Inc. Other company and product names may be trademarks of the respective companies with which they are associated.
2014 InvenSense, Inc. All rights reserved.

Page 14 of 14

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived INMP405ACEZ-R7 Datasheet file may be downloaded here without warranties.

Datasheet ID: INMP405ACEZ-R7 639244