MC13214R2

MC13214R2 Datasheet

Document Number MC1321x Rev. 03/2006

Part	Datasheet
MC13214R2	MC13214R2 (pdf)

Related Parts	Information
MC13214	MC13214

PDF Datasheet Preview
Freescale Semiconductor Technical Data MC1321x MC13211/212/213/214 ZigBee - Compliant Platform - Package Information Case 1664-01 71-pin LGA [9x9 mm] Ordering Information GHz Low Power Transceiver for the Standard plus Microcontroller 1 Introduction The MC1321x family is Freescale’s second-generation ZigBee platform which incorporates a low power GHz radio frequency transceiver and an 8-bit microcontroller into a single 9x9x1 mm 71-pin LGA package. The MC1321x solution can be used for wireless applications from simple proprietary point-to-point connectivity to a complete ZigBee mesh network. The combination of the radio and a microcontroller in a small footprint package allows for a cost-effective solution. Device Device Marking Package MC132111 MC132121 MC132131 MC132141 13211 13212 13213 13214 1 See Table 1 for more details. Contents 1 Introduction 1 2 MC1321x Pin Assignment and Connections 8 3 MC1321x Serial Peripheral Interface SPI 14 4 IEEE Modem 16 5 MCU 25 6 System Electrical Specification 46 7 Application Considerations 63 8 Mechanical Diagrams 68 The MC1321x contains an RF transceiver which is an IEEE 802.15.4-compliant radio that operates in the GHz ISM frequency band. The transceiver includes a low noise amplifier, 1mW nominal output power, PA with internal voltage controlled oscillator VCO , integrated transmit/receive switch, on-board power supply regulation, and full spread-spectrum encoding and decoding. The MC1321x also contains a microcontroller based on the HCS08 Family of Microcontroller Units MCU and can provide up to 60KB of flash memory and 4KB of RAM. The onboard MCU allows the communications Freescale reserves the right to change the detail specifications as may be required to permit improvements in the design of its products. Freescale Semiconductor, Inc., 2005, All rights reserved. stack and also the application to reside on the same system-in-package SIP . The MC1321x family is organized as follows: • The MC13211 has 16KB of flash and 1KB of RAM and is an ideal solution for low cost, proprietary applications that require wireless point-to-point or star network connectivity. The MC13211 combined with the Freescale Simple MAC SMAC provides the foundation for proprietary applications by supplying the necessary source code and application examples to get users started on implementing wireless connectivity. • The MC13212 contains 32K of flash and 2KB of RAM and is intended for use with the Freescale fully compliant MAC. Custom networks based on the standard MAC can be implemented to fit user needs. The standard supports star, mesh and cluster tree topologies as well as beaconed networks. • The MC13213 contains 60K of flash and 4KB of RAM and is also intended for use with the Freescale fully compliant MAC where larger memory is required. In addition, this device can support ZigBee applications that use a stack from 3rd party vendors. • The MC13214 is a fully compliant ZigBee platform. The MC13214 contains 60K of flash and 4KB of RAM and uses the Figure 8 Wireless ZigBee Stack Z-stack software. Applications can be added to develop fully certified ZigBee products. Applications include, but are not limited to, the following: • Residential and commercial automation Lighting control Security Access control Heating, ventilation, air-conditioning HVAC Automated meter reading AMR • Industrial Control Asset tracking and monitoring Homeland security Process management Environmental monitoring and control HVAC Automated meter reading • Health Care Patient monitoring Fitness monitoring Freescale Semiconductor Ordering Information Table 1 provides additional details about the MC1321x family. Table Orderable Parts Details Device MC13211 MC13211R2 MC13212 MC13212R2 MC13213 MC13213R2 MC13214 MC13214R2 Operating Temp Range Package Memory Options -40° to 85° C -40° to 85° C -40° to 85° C -40° to 85° C -40° to 85° C -40° to 85° C -40° to 85° C -40° to 85° C LGA Tape and Reel LGA LGA Tape and Reel LGA LGA Tape and Reel LGA Tape and Reel 1KB RAM, Intended for proprietary applications and Freescale 16KB Flash Simple MAC SMAC 1KB RAM, Intended for proprietary applications and Freescale 16KB Flash Simple MAC SMAC 2KB RAM, Intended for IEEE compliant applications and 32KB Flash Freescale MAC 2KB RAM, Intended for IEEE compliant applications and 32KB Flash Freescale MAC 4KB RAM, 60KB Flash Intended for IEEE compliant applications and Freescale MAC. Also supports ZigBee applications that use a stack from a 3rd party vendor. 4KB RAM, 60KB Flash Intended for IEEE compliant applications and Freescale MAC. Also supports ZigBee applications that use a stack from a 3rd party vendor. 4KB RAM, Intended for full ZigBee compliant applications using the 60KB Flash F8 Wireless Z-Stack 4KB RAM, Intended for full ZigBee compliant applications using the 60KB Flash F8 Wireless Z-Stack General Platform Features • IEEE standard compliant on-chip transceiver/modem 2.4GHz 16 selectable channels Programmable output power • Multiple power saving modes • 2V to 3.4V operating voltage with on-chip voltage regulators • -40°C to +85°C temperature range • Low external component count • Supports single 16 MHz crystal clock source operation or dual crystal operation • Support for SMAC, IEEE and ZigBee software • 9mm x 9mm x 1mm 71-pin LGA Freescale Semiconductor Microcontroller Features • Low voltage MCU with 40 MHz low power HCS08 CPU core • Up to 60K flash memory with block protection and security and 4K RAM MC13211 16KB Flash, 1KB RAM MC13212 32KB Flash, 2KB RAM MC13213 60KB Flash, 4KB RAM MC13214 60KB Flash, 4KB RAM with ZigBee Z-stack • Low power modes Wait plus Stop2 and Stop3 modes • Dedicated serial peripheral interface SPI connected internally to modem • One 4-channel and one 1-channel 16-bit timer/pulse width modulator TPM module with selectable input capture, output capture, and PWM capability. • 8-bit port keyboard interrupt KBI • 8-channel 8-10-bit ADC • Two independent serial communication interfaces SCI • Multiple clock source options Internal clock generator ICG with 243 kHz oscillator that has trimming resolution and deviation across voltage. Startup oscillator of approximately 8 MHz External crystal or resonator External source from modem clock for very high accuracy source or system low-cost option • Inter-integrated circuit IIC interface. • In-circuit debug and flash programming available via on-chip background debug module BDM Two comparator and 9 trigger modes Eight deep FIFO for storing change-of-flow addresses and event-only data Tag and force breakpoints In-circuit debugging with single breakpoint • System protection features Programmable low voltage interrupt LVI Optional watchdog timer COP Illegal opcode detection • Up to 32 MCU GPIO with programmable pullups Freescale Semiconductor RF Modem Features • Fully compliant IEEE transceiver supports 250 kbps O-QPSK data in MHz channels and full spread-spectrum encode and decode • Operates on one of 16 selectable channels in the GHz ISM band • -1 dBm to 0 dBm nominal output power, programmable from -27 dBm to +3 dBm typical • Receive sensitivity of <-92 dBm typical at 1% PER, 20-byte packet, much better than the IEEE specification of -85 dBm • Integrated transmit/receive switch • Dual PA ouput pairs which can be programmed for full differential single-port or dual-port operation that supports an external LNA and/or PA. • Three low power modes for increased battery life • Programmable frequency clock output for use by MCU • Onboard trim capability for 16 MHz crystal reference oscillator eliminates need for external variable capacitors and allows for automated production frequency calibration • Four internal timer comparators available to supplement MCU timer resources • Supports both packet data mode and streaming data mode • Seven GPIO to supplement MCU GPIO

PDF Datasheet Preview

Freescale Semiconductor Technical Data

MC1321x

MC13211/212/213/214

ZigBee - Compliant Platform -

Package Information Case 1664-01
71-pin LGA [9x9 mm]
Ordering Information

GHz Low Power Transceiver for the Standard plus Microcontroller
1 Introduction

The MC1321x family is Freescale’s second-generation ZigBee platform which incorporates a low power GHz radio frequency transceiver and an 8-bit microcontroller into a single 9x9x1 mm 71-pin LGA package. The MC1321x solution can be used for wireless applications from simple proprietary point-to-point connectivity to a complete ZigBee mesh network. The combination of the radio and a microcontroller in a small footprint package allows for a cost-effective solution.

Device

Device Marking Package

MC132111 MC132121 MC132131 MC132141
13211 13212 13213 13214
1 See Table 1 for more details.

Contents
1 Introduction 1 2 MC1321x Pin Assignment and Connections 8 3 MC1321x Serial Peripheral Interface SPI 14 4 IEEE Modem 16 5 MCU 25 6 System Electrical Specification 46 7 Application Considerations 63 8 Mechanical Diagrams 68

The MC1321x contains an RF transceiver which is an IEEE 802.15.4-compliant radio that operates in the GHz ISM frequency band. The transceiver includes a low noise amplifier, 1mW nominal output power, PA with internal voltage controlled oscillator VCO , integrated transmit/receive switch, on-board power supply regulation, and full spread-spectrum encoding and decoding.

The MC1321x also contains a microcontroller based on the HCS08 Family of Microcontroller Units MCU and can provide up to 60KB of flash memory and 4KB of RAM. The onboard MCU allows the communications

Freescale reserves the right to change the detail specifications as may be required to permit improvements in the design of its products. Freescale Semiconductor, Inc., 2005, All rights reserved.
stack and also the application to reside on the same system-in-package SIP . The MC1321x family is organized as follows:
• The MC13211 has 16KB of flash and 1KB of RAM and is an ideal solution for low cost, proprietary applications that require wireless point-to-point or star network connectivity. The MC13211 combined with the Freescale Simple MAC SMAC provides the foundation for proprietary applications by supplying the necessary source code and application examples to get users started on implementing wireless connectivity.
• The MC13212 contains 32K of flash and 2KB of RAM and is intended for use with the Freescale fully compliant MAC. Custom networks based on the standard MAC can be implemented to fit user needs. The standard supports star, mesh and cluster tree topologies as well as beaconed networks.
• The MC13213 contains 60K of flash and 4KB of RAM and is also intended for use with the Freescale fully compliant MAC where larger memory is required. In addition, this device can support ZigBee applications that use a stack from 3rd party vendors.
• The MC13214 is a fully compliant ZigBee platform. The MC13214 contains 60K of flash and 4KB of RAM and uses the Figure 8 Wireless ZigBee Stack Z-stack software. Applications can be added to develop fully certified ZigBee products.

Applications include, but are not limited to, the following:
• Residential and commercial automation Lighting control Security Access control Heating, ventilation, air-conditioning HVAC Automated meter reading AMR
• Industrial Control Asset tracking and monitoring Homeland security Process management Environmental monitoring and control HVAC Automated meter reading
• Health Care Patient monitoring Fitness monitoring

Freescale Semiconductor
Ordering Information

Table 1 provides additional details about the MC1321x family.

Table Orderable Parts Details

Device MC13211 MC13211R2 MC13212 MC13212R2 MC13213

MC13213R2

MC13214 MC13214R2

Operating Temp Range

Package

Memory Options
-40° to 85° C -40° to 85° C -40° to 85° C -40° to 85° C -40° to 85° C
-40° to 85° C
-40° to 85° C -40° to 85° C

LGA Tape and Reel LGA

LGA Tape and Reel LGA

LGA Tape and Reel

LGA Tape and Reel
1KB RAM, Intended for proprietary applications and Freescale 16KB Flash Simple MAC SMAC
1KB RAM, Intended for proprietary applications and Freescale 16KB Flash Simple MAC SMAC
2KB RAM, Intended for IEEE compliant applications and 32KB Flash Freescale MAC
2KB RAM, Intended for IEEE compliant applications and 32KB Flash Freescale MAC
4KB RAM, 60KB Flash

Intended for IEEE compliant applications and Freescale MAC. Also supports ZigBee applications that use a stack from a 3rd party vendor.
4KB RAM, 60KB Flash

Intended for IEEE compliant applications and Freescale MAC. Also supports ZigBee applications that use a stack from a 3rd party vendor.
4KB RAM, Intended for full ZigBee compliant applications using the 60KB Flash F8 Wireless Z-Stack
4KB RAM, Intended for full ZigBee compliant applications using the 60KB Flash F8 Wireless Z-Stack

General Platform Features
• IEEE standard compliant on-chip transceiver/modem 2.4GHz 16 selectable channels Programmable output power
• Multiple power saving modes
• 2V to 3.4V operating voltage with on-chip voltage regulators
• -40°C to +85°C temperature range
• Low external component count
• Supports single 16 MHz crystal clock source operation or dual crystal operation
• Support for SMAC, IEEE and ZigBee software
• 9mm x 9mm x 1mm 71-pin LGA

Freescale Semiconductor

Microcontroller Features
• Low voltage MCU with 40 MHz low power HCS08 CPU core
• Up to 60K flash memory with block protection and security and 4K RAM

MC13211 16KB Flash, 1KB RAM MC13212 32KB Flash, 2KB RAM MC13213 60KB Flash, 4KB RAM MC13214 60KB Flash, 4KB RAM with ZigBee Z-stack
• Low power modes Wait plus Stop2 and Stop3 modes
• Dedicated serial peripheral interface SPI connected internally to modem
• One 4-channel and one 1-channel 16-bit timer/pulse width modulator TPM module with selectable input capture, output capture, and PWM capability.
• 8-bit port keyboard interrupt KBI
• 8-channel 8-10-bit ADC
• Two independent serial communication interfaces SCI
• Multiple clock source options Internal clock generator ICG with 243 kHz oscillator that has trimming resolution
and deviation across voltage. Startup oscillator of approximately 8 MHz External crystal or resonator External source from modem clock for very high accuracy source or system low-cost option
• Inter-integrated circuit IIC interface.
• In-circuit debug and flash programming available via on-chip background debug module BDM Two comparator and 9 trigger modes Eight deep FIFO for storing change-of-flow addresses and event-only data Tag and force breakpoints In-circuit debugging with single breakpoint
• System protection features Programmable low voltage interrupt LVI Optional watchdog timer COP Illegal opcode detection
• Up to 32 MCU GPIO with programmable pullups

Freescale Semiconductor

RF Modem Features
• Fully compliant IEEE transceiver supports 250 kbps O-QPSK data in MHz channels and full spread-spectrum encode and decode
• Operates on one of 16 selectable channels in the GHz ISM band
• -1 dBm to 0 dBm nominal output power, programmable from -27 dBm to +3 dBm typical
• Receive sensitivity of <-92 dBm typical at 1% PER, 20-byte packet, much better than the IEEE
specification of -85 dBm
• Integrated transmit/receive switch
• Dual PA ouput pairs which can be programmed for full differential single-port or dual-port
operation that supports an external LNA and/or PA.
• Three low power modes for increased battery life
• Programmable frequency clock output for use by MCU
• Onboard trim capability for 16 MHz crystal reference oscillator eliminates need for external
variable capacitors and allows for automated production frequency calibration
• Four internal timer comparators available to supplement MCU timer resources
• Supports both packet data mode and streaming data mode
• Seven GPIO to supplement MCU GPIO

More datasheets: 67095-010LF | 67095-005LF | 67095-002LF | 67095-003LF | 67095-004LF | CA3102R20-15SF183 | QHW100A1-Q | QHW075A1-Q | QHW050A1-Q | MC13214

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MC13214R2 Datasheet file may be downloaded here without warranties.

Datasheet ID: MC13214R2 635474