PW174KB0503F01

PW174KB0503F01 Datasheet

PW174KB

Part	Datasheet
PW174KB0503F01	PW174KB0503F01 (pdf)

Related Parts	Information
PW174KB0903F01	PW174KB0903F01
PW174KB1203F01	PW174KB1203F01
PW174KB2403F01	PW174KB2403F01
PW174KB1503F01	PW174KB1503F01
PW174KB1803F01	PW174KB1803F01
PW174KB4803F01	PW174KB4803F01

PDF Datasheet Preview
PW174KB Universal 60 65 Watt Series ITE Switch-Mode Power Supply •100-240VAC Universal Input •Desktop Style •9V to 48V Single Output Models, up to 65W •Modified and Custom Designs Available •Regulated Output with Low Ripple •Impact-Resistant Polycarbonate Enclosure •No load Power Consumption < 0.5W •Meets EISA Requirements see next page for details . •Meets Energy Star Level IV 3 Year Warranty Specifications All Specifications are typical at nominal input, full load at 25°C unless otherwise stated. AC Input 100-240VAC, -/-10%, 47-63 Hz, MTBF >100,000 hours calculated Input Current 90VAC 1.5A Hold-up Time 18 ms min. 120VAC Inrush Current Inrush limiting provided. Overvoltage Protection Built-in Input Fuses Internal Primary Current Fuse is provided. Overload Protection Hiccup Mode Efficiency Meet EISA Requirements see page 2 Short Circuit Protection Hiccup Mode Output Voltage See chart. Topology Switching Fixed Frequency Flyback Output Power See chart Approvals and Safety Standards EN/IEC/CSA/UL60950-1, EMC EN55022/55024/61000 Ripple and Noise 1% pk-pk max., 20MHz BW Dielectric Withstand Input-Output 3000VAC, Input-GND 1500VAC, Output-GND 500VDC Line & Load Voltage Regulation Excluding Cord Line +/- 1%, Load: Operating Temperature 0° to 40°C, no derating Transient Response max., 50% load step, typical Storage Temperature -30 to +85°C. Minimum Load Not required. Relative Humidity 5% to 95%, non-condensing Case Material Black 94V0 Polycarbonate Altitude 0 to 10,000 ft. Case Dimensions See outline drawing. Output Connections Cable 18AWG, 1500mm, 2 conductor. Connector 2.5mm barrel type Ault #3 connector, center contact Other connector options are available. PW174 K B 12 03 F 01 Modification Designator. "01" is standared part, "02" and higher denotes a modified model. Input Receptacle. See Below for options. "F" receptacle IEC320, C14 type, grounded is noted above. Output Connector. "03" connector is standard. See below. Other output connectors available. Output Voltage Manufacturing Location Product Family SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone • Fax • Email • 1 of 3

PDF Datasheet Preview

PW174KB

Universal 60 65 Watt Series ITE Switch-Mode Power Supply
•100-240VAC Universal Input
•Desktop Style
•9V to 48V Single Output Models, up to 65W
•Modified and Custom Designs Available
•Regulated Output with Low Ripple
•Impact-Resistant Polycarbonate Enclosure
•No load Power Consumption < 0.5W
•Meets EISA Requirements see next page for details .
•Meets Energy Star Level IV
3 Year Warranty

Specifications

All Specifications are typical at nominal input, full load at 25°C unless otherwise stated.

AC Input 100-240VAC, -/-10%, 47-63 Hz,

MTBF >100,000 hours calculated

Input Current 90VAC 1.5A

Hold-up Time 18 ms min. 120VAC

Inrush Current Inrush limiting provided.

Overvoltage Protection Built-in

Input Fuses Internal Primary Current Fuse is provided.

Overload Protection Hiccup Mode

Efficiency Meet EISA Requirements see page 2

Short Circuit Protection Hiccup Mode

Output Voltage See chart.

Topology Switching Fixed Frequency Flyback

Output Power See chart

Approvals and Safety Standards EN/IEC/CSA/UL60950-1, EMC EN55022/55024/61000

Ripple and Noise 1% pk-pk max., 20MHz BW

Dielectric Withstand Input-Output 3000VAC, Input-GND 1500VAC, Output-GND 500VDC

Line & Load Voltage Regulation Excluding Cord Line +/- 1%, Load:

Operating Temperature 0° to 40°C, no derating

Transient Response max., 50% load step, typical

Storage Temperature -30 to +85°C.

Minimum Load Not required.

Relative Humidity 5% to 95%, non-condensing

Case Material Black 94V0 Polycarbonate

Altitude 0 to 10,000 ft.

Case Dimensions See outline drawing.

Output Connections Cable 18AWG, 1500mm, 2 conductor. Connector 2.5mm barrel type Ault #3 connector, center contact Other connector options are available.

PW174 K B 12 03 F 01

Modification Designator. "01" is standared part, "02" and higher denotes a modified model.

Input Receptacle. See Below for options. "F" receptacle IEC320, C14 type, grounded is noted above.

Output Connector. "03" connector is standard. See below. Other output connectors available.

Output Voltage

Manufacturing Location

Product Family

SL Power Electronics Corp
• 6050 King Drive Ventura, CA 93003
• Phone
• Fax
• Email
•
1 of 3

More datasheets: BDW23ATU | BDW23BTU | BDW23CTU | 2N3905TAR | 2N3905_D29Z | 2N3905TFR | 2N3905TF | 2N3905TA | 2N3905BU | AO4821_101

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PW174KB0503F01 Datasheet file may be downloaded here without warranties.

Datasheet ID: PW174KB0503F01 506472