MENB1150A1251F01

MENB1150A1251F01 Datasheet

MENB1150

Part	Datasheet
MENB1150A1251F01	MENB1150A1251F01 (pdf)

Related Parts	Information
MENB1150A2451F01	MENB1150A2451F01
MENB1150A1851F01	MENB1150A1851F01
MENB1150A1551F01	MENB1150A1551F01

PDF Datasheet Preview
MENB1150 Universal Input 150 Watt Series Medical Switch-Mode Power Supply •90-264VAC Universal Input •Meets Efficiency Level V, EU EC No 278/2009 Phase II •Meets UL/EN/IEC60601-1, 3rd Edition, 2xMOPP •Desktop Style •12V to 24V Single Output Models, up to 150W •Modified and Custom Designs Available •Regulated Output with Low Ripple •Impact-Resistant Polycarbonate Enclosure •No Load Power Consumption <0.5W International Safety Agency Approvals 3 Year Warranty Specifications All Specifications are typical at nominal input, full load at 25C unless otherwise stated. AC Input Current Inrush Current 100-240Vac, +/-10%, 47-63 Hz, 100 Vac A 60A peak 264Vac, cold start MTBF Hold-up Time Turn-on Time 100,000 hours calculated 18 mS min 110Vac, 21mS min 240 Vac 2 sec max Input Fuse 3.15A, 250V Internal Primary Current Fuse provided Output Rise Time 200mS max 11//240Vac Efficiency Output Voltage Output Power Ripple and Noise Line/Load Regulation Transient Response Minimum Load Case Material Meets Efficiency Level V, ErPII See chart See chart 1% pk-pk max., 20MHz BW Excluding Cord Line +/- 1%, Load +/-5% 500us max., 50% load step, typical Not required Black 94V0 Polycarbonate Overload Protection Hiccup Mode Short Circuit Protection Hiccup Mode Topology Switching Fixed Frequency Flyback Safety and EMC Approvals EN/IEC/CSA/UL60601-1, 3rd Edition EMC See chart Dielectric Withstand Input-Output 2 x MOPP Input-GND:1 x MOPP, Output-GND 500Vdc Operating Temperature 0 to 40C, no derating Storage Temperature -30 to +85C Relative Humidity

PDF Datasheet Preview

MENB1150

Universal Input 150 Watt Series

Medical Switch-Mode Power Supply
•90-264VAC Universal Input
•Meets Efficiency Level V, EU EC No 278/2009 Phase II
•Meets UL/EN/IEC60601-1, 3rd Edition, 2xMOPP
•Desktop Style
•12V to 24V Single Output Models, up to 150W
•Modified and Custom Designs Available
•Regulated Output with Low Ripple
•Impact-Resistant Polycarbonate Enclosure
•No Load Power Consumption <0.5W

International Safety Agency Approvals
3 Year Warranty

Specifications

All Specifications are typical at nominal input, full load at 25C unless otherwise stated.

AC Input Current Inrush Current
100-240Vac, +/-10%, 47-63 Hz, 100 Vac A
60A peak 264Vac, cold start

MTBF Hold-up Time Turn-on Time
100,000 hours calculated 18 mS min 110Vac, 21mS min 240 Vac
2 sec max

Input Fuse
3.15A, 250V Internal Primary Current Fuse provided Output Rise Time
200mS max 11//240Vac

Efficiency Output Voltage Output Power Ripple and Noise

Line/Load Regulation Transient Response Minimum Load Case Material

Meets Efficiency Level V, ErPII See chart See chart
1% pk-pk max., 20MHz BW

Excluding Cord Line +/- 1%, Load +/-5%
500us max., 50% load step, typical Not required

Black 94V0 Polycarbonate

Overload Protection

Hiccup Mode

Short Circuit Protection

Hiccup Mode

Topology

Switching Fixed Frequency Flyback

Safety and EMC Approvals

EN/IEC/CSA/UL60601-1, 3rd Edition

EMC See chart

Dielectric Withstand

Input-Output 2 x MOPP

Input-GND:1 x MOPP, Output-GND 500Vdc

Operating Temperature
0 to 40C, no derating

Storage Temperature
-30 to +85C

Relative Humidity

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MENB1150A1251F01 Datasheet file may be downloaded here without warranties.

Datasheet ID: MENB1150A1251F01 506448