MENB1060A1803F01

MENB1060A1803F01 Datasheet

MENB1060

Part	Datasheet
MENB1060A1803F01	MENB1060A1803F01 (pdf)

Related Parts	Information
MENB1060A1803N01	MENB1060A1803N01
MENB1060A2403N01	MENB1060A2403N01
MENB1060A1503N01	MENB1060A1503N01
MENB1060A1503F01	MENB1060A1503F01
MENB1060A1203N01	MENB1060A1203N01
MENB1060A4803F01	MENB1060A4803F01
MENB1060A0903N01	MENB1060A0903N01
MENB1060A0551N01	MENB1060A0551N01

PDF Datasheet Preview
MENB1060 Universal Input 60 Watt Series Medical Switch-Mode Power Supply •100-240VAC Universal Input •Meets EISA2007, CEC Efficiency Level V, EU EC No 278/2009 Phase II •Certified to UL/EN60601-1 •Desktop Style •5V to 24V Single Output Models, up to 60W •Modified and Custom Designs Available •Regulated Output with Low Ripple •Impact-Resistant Polycarbonate Enclosure •No Load Power Consumption <0.5W 3 Year Warranty Specifications All Specifications are typical at nominal input, full load at 25°C unless otherwise stated. AC Input 100-240Vac, -/-10%, 47-63 Hz, MTBF >100,000 hours calculated Input Current 100VAC 1.5A max Hold-up Time 18 ms min. 115Vac, 60 ms min. 240 Vac Inrush Current 60 A peak, 264 V, cold start Overload Protection Hiccup Mode Input Fuse 2.0A, 250V Internal Primary Current Fuse is provided Short Circuit Protection Hiccup Mode Efficiency Output Voltage Meets EISA2007, CEC Efficiency Level V, EU EC No 278/2009 Phase II See chart Topology Safety Standards Switching Fixed Frequency Flyback EN/IEC/CSA/UL60601-1 Output Power See chart EMC See chart below Ripple and Noise Line/Load Voltage Regulation 1% pk-pk max., 20MHz BW Dielectric Withstand Line +/- 1%, Load +/-5% Operating Temperature Input-Output 5,656Vdc, Input-GND 1,500 Vac, Output-GND 500Vdc 0° to 40°C, no derating Transient Response 500µs max., 50% load step, typical Storage Temperature -30 to +85°C Minimum Load Not required Relative Humidity 5% to 95%, non-condensing Case Material Black 94V0 Polycarbonate Altitude 0 to 10,000 ft Case Dimensions Weight

PDF Datasheet Preview

MENB1060

Universal Input 60 Watt Series Medical Switch-Mode Power Supply
•100-240VAC Universal Input
•Meets EISA2007, CEC Efficiency Level V,

EU EC No 278/2009 Phase II
•Certified to UL/EN60601-1
•Desktop Style
•5V to 24V Single Output Models, up to 60W
•Modified and Custom Designs Available
•Regulated Output with Low Ripple
•Impact-Resistant Polycarbonate Enclosure
•No Load Power Consumption <0.5W
3 Year Warranty

Specifications

All Specifications are typical at nominal input, full load at 25°C unless otherwise stated.

AC Input
100-240Vac, -/-10%, 47-63 Hz, MTBF
>100,000 hours calculated

Input Current
100VAC 1.5A max Hold-up Time
18 ms min. 115Vac, 60 ms min. 240 Vac

Inrush Current
60 A peak, 264 V, cold start Overload Protection

Hiccup Mode

Input Fuse
2.0A, 250V Internal Primary Current Fuse is provided Short Circuit Protection

Hiccup Mode

Efficiency Output Voltage

Meets EISA2007, CEC Efficiency Level V, EU EC No 278/2009 Phase II

See chart

Topology Safety Standards

Switching Fixed Frequency Flyback EN/IEC/CSA/UL60601-1

Output Power

See chart EMC

See chart below

Ripple and Noise Line/Load Voltage Regulation
1% pk-pk max., 20MHz BW Dielectric Withstand Line +/- 1%, Load +/-5% Operating Temperature

Input-Output 5,656Vdc, Input-GND 1,500 Vac, Output-GND 500Vdc
0° to 40°C, no derating

Transient Response
500µs max., 50% load step, typical Storage Temperature
-30 to +85°C

Minimum Load

Not required Relative Humidity
5% to 95%, non-condensing

Case Material

Black 94V0 Polycarbonate Altitude
0 to 10,000 ft

Case Dimensions Weight

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MENB1060A1803F01 Datasheet file may be downloaded here without warranties.

Datasheet ID: MENB1060A1803F01 506442