BT111-A-HCI

BT111-A-HCI Datasheet

BT111 Smart Ready HCI Module

Part	Datasheet
BT111-A-HCI	BT111-A-HCI (pdf)

PDF Datasheet Preview
BT111 Smart Ready HCI Module DATA SHEET Monday, 05 August 2013 Version Copyright 2000-2013 Bluegiga Technologies All rights reserved. Bluegiga Technologies assumes no responsibility for any errors which may appear in this manual. Furthermore, Bluegiga Technologies reserves the right to alter the hardware, software, and/or specifications detailed here at any time without notice and does not make any commitment to update the information contained here. Bluegiga’s products are not authorized for use as critical components in life support devices or systems. The WRAP is a registered trademark of Bluegiga Technologies The Bluetooth trademark is owned by the Bluetooth SIG Inc., USA and is licensed to Bluegiga Technologies. All other trademarks listed herein are owned by their respective owners. Bluegiga Technologies Oy VERSION HISTORY Version Comment First public release Minor changes FCC and CE update Low energy master and slave mode supported IC statement modified Contact details updated Formatting, reel dimensions Recommended PCB land pattern added Bluegiga Technologies Oy TABLE OF CONTENTS 1 BT111 Product numbering 2 Block Diagram 3 Pinout and Terminal Descriptions 4 External Dimensions and Land 11 5 Layout 13 BT111-A Layout 13 6 Electrical Characteristics 15 Absolute Maximum Ratings 15 Input/Output Terminal 15 USB Linear Regulator 15 High-voltage Linear Regulator 16 Digital 16 Current Consumption 17 7 RF Characteristics 20 Transmitter Characteristics 20 Receiver Characteristics 21 Radiated Spurious Emissions 22 Antenna Characteristics 22 8 Clock 23 9 Bluetooth Stack 24 10 Programmable I/O Ports 24 11 Wi-Fi Coexistence 24 12 Memory Management 25 Memory Management Unit 25 System RAM 25 Internal ROM Memory 5Mb 25 Internal EEPROM 25 13 Serial Interfaces 26 USB Interface 26 Programming and Debug Interface 26 14 Audio Interfaces 27 PCM Interface 27 PCM Interface Master/Slave 27 Long Frame Sync 28 Short Frame Sync 28 Multi-slot Operation 29 GCI Interface 29 Bluegiga Technologies Oy Slots and Sample 30 Additional Features 31 PCM Timing Information 31 PCM_CLK and PCM_SYNC Generation 35 PCM Configuration 36 Digital Audio Interface I2S 36 15 Power Control and Regulation 41 Voltage Regulator Enable 41 USB Linear Regulator 41 High Voltage Linear Regulator 41 Low Voltage Linear Regulators 42 Powering Sequence 42 Reset 42 16 Example Schematic 43 17 Software 44 On-chip 45 Bluetooth HCI Stack 45 Latest Feature of the HCI 45 18 Soldering 46 19 Certifications 47 Bluetooth 47 FCC/IC USA/Canada 47 FCC et IC 48 CE Europe 49 50 20 Moisture Sensitivity Level MSL classification 51 21 Packaging and Reel 52 22 Contact 54 Bluegiga Technologies Oy BT111 Bluetooth Smart Ready HCI Module BT111 is a low cost and ultrasmall Bluetooth Smart Ready HCI module that is designed for applications where both Bluetooth classic and Bluetooth low energy connectivity is needed. BT111 integrates a Bluetooth dual mode radio, HCI software stack, USB interface and an antenna. BT111 is compatible with Windows and Linux operating systems and Microsoft and BlueZ Bluetooth stacks and offers OEMs fast and risk free way to integrate Bluetooth connectivity into their applications. • Health and fitness gateways • Point of sale • M2M connectivity • Automotive aftermarket • Personal navigation devices • Consumer electronics • Industrial and home automation gateways KEY FEATURES • Bluetooth v.4.0, dual mode compliant • Support Bluetooth classic • Supports Bluetooth low energy master and slave mode • Radio capabilities • Transmit power +8dBm • Receiver sensitivity -89dBm • Line-of-sight range 100+ meters • Integrated antenna • Interfaces • HCI over USB host interface • co-existence interface • Software programmable GPIO • PCM or I2S audio interfaces • Supply voltage 1.7V to 3.6V or 3.1V to 3.6V • Temperature range -30C to +85C • Ultra compact size 13.05mm x 9.30mm • Bluetooth, CE, FCC, IC and Japan PHYSICAL OUTLOOK Bluegiga Technologies Oy 1 BT111 Product numbering Antenna: = Internal BT111-A-HCI

PDF Datasheet Preview

BT111 Smart Ready HCI Module

DATA SHEET

Monday, 05 August 2013 Version

Copyright 2000-2013 Bluegiga Technologies

All rights reserved. Bluegiga Technologies assumes no responsibility for any errors which may appear in this manual. Furthermore, Bluegiga Technologies reserves the right to alter the hardware, software, and/or specifications detailed here at any time without notice and does not make any commitment to update the information contained here. Bluegiga’s products are not authorized for use as critical components in life support devices or systems. The WRAP is a registered trademark of Bluegiga Technologies The Bluetooth trademark is owned by the Bluetooth SIG Inc., USA and is licensed to Bluegiga Technologies. All other trademarks listed herein are owned by their respective owners.

Bluegiga Technologies Oy

VERSION HISTORY Version

Comment

First public release Minor changes

FCC and CE update Low energy master and slave mode supported

IC statement modified Contact details updated Formatting, reel dimensions Recommended PCB land pattern added

Bluegiga Technologies Oy

TABLE OF CONTENTS
1 BT111 Product numbering 2 Block Diagram 3 Pinout and Terminal Descriptions 4 External Dimensions and Land 11 5 Layout 13

BT111-A Layout 13 6 Electrical Characteristics 15

Absolute Maximum Ratings 15 Input/Output Terminal 15

USB Linear Regulator 15 High-voltage Linear Regulator 16 Digital 16 Current Consumption 17 7 RF Characteristics 20 Transmitter Characteristics 20 Receiver Characteristics 21 Radiated Spurious Emissions 22 Antenna Characteristics 22 8 Clock 23 9 Bluetooth Stack 24 10 Programmable I/O Ports 24 11 Wi-Fi Coexistence 24 12 Memory Management 25 Memory Management Unit 25 System RAM 25 Internal ROM Memory 5Mb 25 Internal EEPROM 25 13 Serial Interfaces 26 USB Interface 26 Programming and Debug Interface 26 14 Audio Interfaces 27 PCM Interface 27 PCM Interface Master/Slave 27 Long Frame Sync 28 Short Frame Sync 28 Multi-slot Operation 29 GCI Interface 29

Bluegiga Technologies Oy

Slots and Sample 30 Additional Features 31 PCM Timing Information 31 PCM_CLK and PCM_SYNC Generation 35 PCM Configuration 36 Digital Audio Interface I2S 36 15 Power Control and Regulation 41 Voltage Regulator Enable 41 USB Linear Regulator 41 High Voltage Linear Regulator 41 Low Voltage Linear Regulators 42 Powering Sequence 42 Reset 42 16 Example Schematic 43 17 Software 44 On-chip 45 Bluetooth HCI Stack 45 Latest Feature of the HCI 45 18 Soldering 46 19 Certifications 47 Bluetooth 47 FCC/IC USA/Canada 47 FCC et IC 48 CE Europe 49 50 20 Moisture Sensitivity Level MSL classification 51 21 Packaging and Reel 52 22 Contact 54

Bluegiga Technologies Oy

BT111 Bluetooth Smart Ready HCI Module

BT111 is a low cost and ultrasmall Bluetooth Smart Ready HCI module that is designed for applications where both Bluetooth classic and Bluetooth low energy connectivity is needed. BT111 integrates a Bluetooth dual mode radio, HCI software stack, USB interface and an antenna. BT111 is compatible with Windows and Linux operating systems and Microsoft and BlueZ Bluetooth stacks and offers OEMs fast and risk free way to integrate Bluetooth connectivity into their applications.
• Health and fitness gateways
• Point of sale
• M2M connectivity
• Automotive aftermarket
• Personal navigation devices
• Consumer electronics
• Industrial and home automation gateways

KEY FEATURES
• Bluetooth v.4.0, dual mode compliant
• Support Bluetooth classic
• Supports Bluetooth low energy master and slave mode
• Radio capabilities
• Transmit power +8dBm
• Receiver sensitivity -89dBm
• Line-of-sight range 100+ meters
• Integrated antenna
• Interfaces
• HCI over USB host interface
• co-existence interface
• Software programmable GPIO
• PCM or I2S audio interfaces
• Supply voltage 1.7V to 3.6V or 3.1V to 3.6V
• Temperature range -30C to +85C
• Ultra compact size 13.05mm x 9.30mm
• Bluetooth, CE, FCC, IC and Japan

PHYSICAL OUTLOOK

Bluegiga Technologies Oy
1 BT111 Product numbering

Antenna:
= Internal

BT111-A-HCI

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived BT111-A-HCI Datasheet file may be downloaded here without warranties.

Datasheet ID: BT111-A-HCI 521929