XM1283C915XE1
XM1283C915XE1 Datasheet
Product Brief XM1283 RFMicrocontroller 433/868/915 MHz module
| Part | Datasheet |
|---|---|
XM1283C915XE1 |
XM1283C915XE1 (pdf) |
| Related Parts | Information |
|---|---|
XM1283C868XE1 |
XM1283C868XE1 |
XM1283C433XE1 |
XM1283C433XE1 |
| PDF Datasheet Preview |
|---|
| Product Brief XM1283 RFMicrocontroller 433/868/915 MHz module XM1283 433 / 868 / 915 MHz Transceiver board with low power 8-bit microcontroller The XM1283 is a radio module based on the highly integrated XE1283 combining an ISM-band radio transceiver and a low power microcontroller on one chip. The XM1283 consists of a DP1283 Drop Module soldered onto a DP to XM adapter. The XM1283 transceiver module enables high data rate communication up to kbit/s. The module is optimized for low power consumption. In transmit mode maximum output power is +15 dBm without any external power amplifier. Three frequency ranges are available to satisfy either the European ETSI300 220-1 or the North American FCC part standards. XM modules may also be ordered as part of a Starter Kit, which includes a microcontroller interface and a PC-based graphical user interface to enable range testing and more detailed product evaluation. ORDERING INFORMATION Part XM1283-C433XEM-1 XM1283-C868XEM-1 XM1283-C915XEM-1 Version TrueRF Pin-package Board with Antenna Board with Antenna Board with Antenna KEY PRODUCT FEATURES • Direct digital interface • Supply voltage down to 2.4V • Minimum external component count • Frequency synthesizer step 500 Hz • Output power programmable up to 15 dBm • High reception sensitivity down to -113 dBm • Data rate from kbit/s to kbit/s • Low Power consumption • 8-bits microcontroller, RISC core • Up to 6 MIPS, 300 uA at 1 MIPS operation • Up to 22 kByte 8kW MTP, 512 Byte RAM XEMICS SA • web: APPLICATION CONNECTOR The XM1283 TrueRF can be connected to test equipment or XEMICS’ development tools via a 20 pins connector. Pin #1 "SCK" Output , Clock of the 3-wire interface Pin #2 "VDD" Connect to a 3.3V power supply. Pin #3 "SI" Output , Data of the 3-wire interface Pin #4 "GND" Connect to Ground Pin #5 "SO" Input , Data of the 3-wire interface Pin #6 "TX" Input , Transmitter selection of the antenna switch not connected by default Pin #7 NC Pin #8 "RX" Input , Receiver selection of the antenna switch not connected by default Pin #9 "SWITCH" Input / Output , RF mode selection / indication Microcontroller Programming connector Microcontroller Mode selection Product Brief XM1283 RFMicrocontroller 433/868/915 MHz module Pin #10 "CLKOUT" Output , Output clock at or MHz Pin #11 NC, grounded Pin #12 “PB 0 ” Input / Output port B pin #13 NC, grounded Pin #14 “PB 1 ” Input / Output port B pin Pin #15 “PB 5 ” Input / Output port B pin Pin #16 “PB 2 ” Input / Output port B pin Pin #17 “PB 6 ” Input / Output port B pin Pin #18 “PB 3 ” Input / Output port B pin Pin #19 “PB 7 ” Input / Output port B pin Pin #20 “PB 4 ” Input / Output port B pin The microcontroller can be programmed via the “programming connector” using a XE8000MP. Jumper VDD 12 34 56 78 9 10 11 12 13 14 15 16 17 18 19 20 Application connector XEMICS 2005 All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. TrueRF is a XEMICS trademark. |
| More datasheets: FOD0708 | AP3154AFG-7 | FQB12N60TM_AM002 | FQI12N60TU | 1B0220-3 | 26042 | 1041930000 | 1041630000 | 1041640000 | 1041940000 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived XM1283C915XE1 Datasheet file may be downloaded here without warranties.