5.82.000.000/0710

5.82.000.000/0710 Datasheet


Part Datasheet
5.82.000.000/0710 5.82.000.000/0710 5.82.000.000/0710 (pdf)
Related Parts Information
3.13.002.922/0000 3.13.002.922/0000 3.13.002.922/0000
PDF Datasheet Preview
RS 76 full-travel keyswitches

General data

The RS 76 full-travel keyswitches are designed for configuring keyboards. They offer very comfortable operation with an overall height of / mm and a key travel of 4 mm. The modular system with a grid of 3/4“ = mm enables you to design any key block you may want. Mechanical contact system RS 76 M

A gold alloy is used as the contact material and provides high contact reliability, low contact resistance and short bouncing time. Solid-state contact system RS 76 C

The solid-state switch in Hall-IC technology ensures bounce-free and wear-free switching and a long operating life. Function When pressing the keys, a permanent magnet changes its position relative to the Hall-IC and thereby generates an output signal. Their use is especially recommended in hostile environments and for heavy duty applications.

Content

RS 76 M full-travel keyswitch, non-illuminated RS 76 M keyswitch, non-illuminated RS 76 M keyswitch with diode, non-illuminated

RS 76 M keyswitch, illuminated RS 76 M keyswitch, illuminated, momentary RS 76 M keyswitch, illuminated, latching RS 76 MX keyswitch, fully illuminated

RS 76 C keyswitch, non-illuminated RS 76 C keyswitch, non-illuminated

RS 76 C keyswitch, illuminated RS 76 C keyswitch, illuminated, momentary RS 76 C keyswitch, illuminated, latching

Keycaps for RS 76, non-illuminated Keycap for RS 76, opaque Keycap for RS 76, opaque, with nail protection Keycap for RS 76 with legend insert

Keycaps for RS 76, illuminated Keycap for RS 76 with light bar Keycap for RS 76, illuminated, with legend insert Keycap for RS 76, illuminated, with nail protection and legend insert Keycap for RS 76, illuminated, with legend insert Keycap, fully illuminated, for RS 76 MX

Keycaps for RS 76, with legend, two-shot moulded/keycap sets Keycap set for RS 76, symbols A-Z Keycap set for RS 76, symbols 0-9

RS 76 accessories Cover for RS 76 IP40

PCB Keyswitches

Stock items are marked by bold printed order numbers.
4 - 126
4 - 127 4 - 127
4 - 128 4 - 129 4 - 129 4 - 130
4 - 132 4 - 133
4 - 134 4 - 135 4 - 135
4 - 136 4 - 136 4 - 137 4 - 137
4 - 138 4 - 138 4 - 139 4 - 139 4 - 140 4 - 140 RS 4 - 142 76 4 - 142 4 - 143
4 - 144 4 - 144
4 - 119

The Rafi full-travel keyswitches RS 76 are modular systems for designing individual key blocks and keyboards in the 3/4 inch = mm grid.

Definitions

Momentary keyswitches Momentary keyswitches return to their initial position after being pressed momentary action .

Latching keyswitches Latching keyswitches lock when actuated and are returned to their initial position when pressed again push-push action .

Keycap materials Keycap without legend insert ABS Keycap with legend insert Keycap body ABS Lens PC

Keycap, n-module A 2-module keycap f. ex. has the twofold length of a 1-module keycap.

RS 76 full-travel keyswitches

Contact principle There are two contact principles Mechanical M Cross contact RS 76 M

Bridge contact RS 76 M, illuminated Contactless C Based on Hall-IC RS 76 C

Soldering The soldering temperature should not exceed 250 °C, the soldering time not be longer tahn 3 seconds. All RS 76 C-keyswitches can be soldered in solder bathes. The assembled PCB should be cleaned only by using brushing machines from the soldering side ot the PCB. The cleaning agend should not exceed the component side ot the PCB.

All keyswitches can be flow-soldered, provided that an acid fluxer is used and that the whole unit is cleaned afterwards in de-ionised water.

Cleaning Keyswitches should not be washed in freon or similar substances as a lubricant is used, otherwise the operating life of the keyswitches will be reduced. If complete keyboards are to be cleaned by dipping, it must be remembered that they keyboard may only be dipped in the dipping solution as far as the component side of the PCB.

Legending of keycaps

Keycaps can be legended by different methods:

Engraving

In this labour intensive process the keycaps are engraved
More datasheets: MURS120-13 | FDC633N_F095 | FDC633N | PT7M7434TAE | PT7M7434TAEX | 76000788 | 992 | M213142 SL005 | M213142 SL001 | M213142 SL002


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 5.82.000.000/0710 Datasheet file may be downloaded here without warranties.

Datasheet ID: 5.82.000.000/0710 522634