538702000

538702000 Datasheet


538701000 WHITE 538702000 BLACK 538703000 RED

Part Datasheet
538702000 538702000 538702000 (pdf)
Related Parts Information
752701000 752701000 752701000
508103000 508103000 508103000
538703000 538703000 538703000
708901000 708901000 708901000
508102000 508102000 508102000
708903000 708903000 708903000
752702000 752702000 752702000
708902000 708902000 708902000
752703000 752703000 752703000
121000102 121000102 121000102
121000101 121000101 121000101
1110801 1110801 1110801
1.90180.4710000 1.90180.4710000 1.90180.4710000
1.90180.4720000 1.90180.4720000 1.90180.4720000
615602263 615602263 615602263
586800000 586800000 586800000
PDF Datasheet Preview
Miscellaneous Components, Hardware & Technical Data

C&K Hardware

AUXILIARY ACTUATORS

Easy to assemble auxiliary actuators for the MM Series provides the end-user with the capability to operate the switch with force not directly in line with the operating button. Actuators are available in either the plain-leaf or roller-leaf style. Each actuator kit consists of the stainless steel spring-leaf with an integral side mounting plate, flexible insulator, two 2 #2-56 x 7/16” roundhead screws, with lockwashers and hex nuts. Actuator and hardware are supplied unassembled. Specially formed auxiliary actuators are available, consult Customer Service Center.

ALS-1 LEAF

ALS-2 LEAF Low Motion

AWS-1 LEAF ROLLER

AWS-2 LEAF ROLLER Low Motion

ITT Industries

Cannon

Miscellaneous Components, Hardware & Technical Data

C&K Hardware

AUXILIARY ACTUATORS

Basic precision HB Series switches, with any terminal style, can be used with these attachable actuators. As supplied, the actuator is not assembled to the switch the switch must be ordered separately. The actuator can be assembled to the switch before mounting, or the actuator can be mounted on the panel or chassis and the switch installed after wiring. Assembly screws, nuts and lockwashers are furnished.

BB-1 SEALED PLUNGER For use with P0 actuator option. BB-2 SEALED PLUNGER For use with PS sealed actuator option.

Actuator assembly sealed to mounting surface by flexible boot and o-ring seal.

BJ-1 OVERTRAVEL PLUNGER For use with P0 actuator option.

BJ-2 OVERTRAVEL PLUNGER For use with PS sealed actuator option.

Provides up to in. total travel mounting by threaded bushing or two screws.

ITT Industries

Cannon

Miscellaneous Components, Hardware & Technical Data

C&K Hardware

EP & TP SERIES, DIA. PLUNGERS

DIA. 5,08Ø
2,54
3,94
508101000 508102000 508103000

WHITE BLACK RED
8600 & KM33 SERIES, DIA. PLUNGERS

DIA. 6,22
4,75
2,03

PART NO. 785101000 WHITE 785102000 BLACK 785103000 RED
8020, 8060, E010, E020, KM11, L & TP SERIES DIA. PLUNGERS

DIA. 7,87 3,51

L 6,35
801801000 WHITE 801802000 BLACK 801803000 RED

EP11 & EP12 MODELS, DIA. SNAP-FITTING PLUNGERS

CAPS

TP SERIES, DIA. PLUNGERS Recommended for S9 plunger
More datasheets: DK807AP | DK959P | DK949P | DK947BP | DK957BP | DK809P | DK759P | DK859P | 752701000 | 508103000


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 538702000 Datasheet file may be downloaded here without warranties.

Datasheet ID: 538702000 522441