Part | Datasheet |
---|---|
![]() |
1.90180.4720000 (pdf) |
Related Parts | Information |
---|---|
![]() |
752701000 |
![]() |
508103000 |
![]() |
538702000 |
![]() |
538703000 |
![]() |
708901000 |
![]() |
508102000 |
![]() |
708903000 |
![]() |
752702000 |
![]() |
708902000 |
![]() |
752703000 |
![]() |
121000102 |
![]() |
121000101 |
![]() |
1110801 |
![]() |
1.90180.4710000 |
![]() |
615602263 |
![]() |
586800000 |
PDF Datasheet Preview |
---|
Miscellaneous Components, Hardware & Technical Data C&K Hardware AUXILIARY ACTUATORS Easy to assemble auxiliary actuators for the MM Series provides the end-user with the capability to operate the switch with force not directly in line with the operating button. Actuators are available in either the plain-leaf or roller-leaf style. Each actuator kit consists of the stainless steel spring-leaf with an integral side mounting plate, flexible insulator, two 2 #2-56 x 7/16” roundhead screws, with lockwashers and hex nuts. Actuator and hardware are supplied unassembled. Specially formed auxiliary actuators are available, consult Customer Service Center. ALS-1 LEAF ALS-2 LEAF Low Motion AWS-1 LEAF ROLLER AWS-2 LEAF ROLLER Low Motion ITT Industries Cannon Miscellaneous Components, Hardware & Technical Data C&K Hardware AUXILIARY ACTUATORS Basic precision HB Series switches, with any terminal style, can be used with these attachable actuators. As supplied, the actuator is not assembled to the switch the switch must be ordered separately. The actuator can be assembled to the switch before mounting, or the actuator can be mounted on the panel or chassis and the switch installed after wiring. Assembly screws, nuts and lockwashers are furnished. BB-1 SEALED PLUNGER For use with P0 actuator option. BB-2 SEALED PLUNGER For use with PS sealed actuator option. Actuator assembly sealed to mounting surface by flexible boot and o-ring seal. BJ-1 OVERTRAVEL PLUNGER For use with P0 actuator option. BJ-2 OVERTRAVEL PLUNGER For use with PS sealed actuator option. Provides up to in. total travel mounting by threaded bushing or two screws. ITT Industries Cannon Miscellaneous Components, Hardware & Technical Data C&K Hardware EP & TP SERIES, DIA. PLUNGERS DIA. 5,08Ø 2,54 3,94 508101000 508102000 508103000 WHITE BLACK RED 8600 & KM33 SERIES, DIA. PLUNGERS DIA. 6,22 4,75 2,03 PART NO. 785101000 WHITE 785102000 BLACK 785103000 RED 8020, 8060, E010, E020, KM11, L & TP SERIES DIA. PLUNGERS DIA. 7,87 3,51 L 6,35 801801000 WHITE 801802000 BLACK 801803000 RED EP11 & EP12 MODELS, DIA. SNAP-FITTING PLUNGERS CAPS TP SERIES, DIA. PLUNGERS Recommended for S9 plunger |
More datasheets: 708901000 | 508102000 | 708903000 | 752702000 | 708902000 | 752703000 | 121000102 | 121000101 | 1110801 | 1.90180.4710000 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 1.90180.4720000 Datasheet file may be downloaded here without warranties.