B39162B9877P810

B39162B9877P810 Datasheet

B9877 B39162B9877P810

Part	Datasheet
B39162B9877P810	B39162B9877P810 (pdf)

PDF Datasheet Preview
RF360 Europe GmbH A Qualcomm TDK Joint Venture SAW Components SAW GPS + GLONASS Filter Series/type Ordering code: Date Version: B9877 B39162B9877P810 June 17, 2013 RF360 products mentioned within this document are offered by RF360 Europe GmbH and other subsidiaries of RF360 Holdings Singapore Pte. Ltd. collectively, the “RF360 Subsidiaries” . RF360 Holdings Singapore Pte. Ltd. is a joint venture of Qualcomm Global Trading Pte. Ltd. and EPCOS AG. References in this documentation to EPCOS AG should properly reference, and shall be read to reference, the RF360 Subsidiaries. RF360 Europe GmbH, Anzinger Str. 13, München, Germany 2016 RF360 Europe GmbH and/or its affiliated companies. All rights reserved. SAW Components SAW GPS + GLONASS Filter Series/type Ordering code: Date Version: B9877 B39162B9877P810 June 17, 2013 EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. SAW Components SAW GPS + GLONASS Filter Data Sheet Application s Low-loss RF GPS + GLONASS filter s Simultaneous usage of GPS band and GLONASS band s Usable passbands MHz for GPS and MHz for GLONASS s Unbalanced to unbalanced operation s Very low insertion attenuation s High out of band selectivity s Low amplitude ripple s Filter impedance 50 s No matching network required for operation at 50 s Input & Output can be exchanged, B9877 is bidirec- tional type. Features s Package size x mm3 s RoHS compatible s Approximate weight g s Package for Surface Mount Technology SMT s Ni, gold-plated terminals s Electrostatic Sensitive Device ESD s Moisture Sensitivity Level 3 MSL3 Pin configuration Input / Output unbalanced Output / Input unbalanced s 2,3,5 To be grounded B9877 MHz bottom view side view top view Please read cautions and warnings and important notes at the end of this document. 2 June 17, 2013 SAW Components SAW GPS + GLONASS Filter Data Sheet Characteristics of Filter Temperature range for specification Terminating source impedance Terminating load impedance: T = to ZS = 50 ZL = 50 B9877 MHz Center frequency B9877 min. typ. max. Maximum insertion attenuation MHz αmax VSWR Input MHz VSWR Output MHz Group delay ripple1 MHz 10 ns Attenuation 1 Measured with aperture 2 MHz. Please read cautions and warnings and important notes at the end of this document. Type Ordering code Marking and package Packaging Date codes S-parameters Soldering profile RoHS compatible Moldability Matching coils B9877 B39162B9877P810 C61157-A8-A30 F61074-V8255-Z000 L_1126 B9877_NB.s2p, B9877_WB.s2p see file header for port/pin assignment table S_6001 RoHS-compatible means that products are compatible with the requirements according to Art. 4 substance restrictions of Directive 2011/65/EU of the European Parliament and of the Council of June 8th, 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment "Directive" with due regard to the application of exemptions as per Annex III of the Directive in certain cases. Before using in overmolding environment, please contact your EPCOS sales office. See Inductor pdf-catalog and Data Library for circuit simulation For further information please contact your local EPCOS sales office or visit our webpage at Published by EPCOS AG Systems, Acoustics, Waves Business Group P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 7 June 17, 2013 Important notes The following applies to all products named in this publication: Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health e.g. in accident prevention or life-saving systems , it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer e.g. installation of protective circuitry or redundancy that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions e.g. because they are classed as hazardous . Useful information on this will be found in our Material Data Sheets on the Internet Should you have any more detailed questions, please contact our sales We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product Please check therefore to what extent product descriptions and contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association ZVEI . The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at 8 June 17, 2013

PDF Datasheet Preview

RF360 Europe GmbH A Qualcomm TDK Joint Venture

SAW Components

SAW GPS + GLONASS Filter
Series/type Ordering code:

Date Version:

B9877 B39162B9877P810

June 17, 2013

RF360 products mentioned within this document are offered by RF360 Europe GmbH and other subsidiaries of RF360 Holdings Singapore Pte. Ltd. collectively, the “RF360 Subsidiaries” . RF360 Holdings Singapore Pte. Ltd. is a joint venture of Qualcomm Global Trading Pte. Ltd. and EPCOS AG. References in this documentation to EPCOS AG should properly reference, and shall be read to reference, the RF360 Subsidiaries. RF360 Europe GmbH, Anzinger Str. 13, München, Germany 2016 RF360 Europe GmbH and/or its affiliated companies. All rights reserved.

SAW Components

SAW GPS + GLONASS Filter
Series/type Ordering code:

Date Version:

B9877 B39162B9877P810

June 17, 2013

EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.

EPCOS AG is a TDK Group Company.

SAW Components SAW GPS + GLONASS Filter

Data Sheet

Application
s Low-loss RF GPS + GLONASS filter s Simultaneous usage of GPS band and GLONASS
band s Usable passbands MHz for GPS and MHz
for GLONASS s Unbalanced to unbalanced operation s Very low insertion attenuation s High out of band selectivity s Low amplitude ripple s Filter impedance 50 s No matching network required for operation at 50 s Input & Output can be exchanged, B9877 is bidirec-
tional type.

Features s Package size x mm3 s RoHS compatible s Approximate weight g s Package for Surface Mount Technology SMT s Ni, gold-plated terminals s Electrostatic Sensitive Device ESD s Moisture Sensitivity Level 3 MSL3

Pin configuration

Input / Output unbalanced

Output / Input unbalanced
s 2,3,5 To be grounded

B9877 MHz
bottom view
side view
top view

Please read cautions and warnings and important notes at the end of this document.
2 June 17, 2013

SAW Components SAW GPS + GLONASS Filter Data Sheet

Characteristics of Filter Temperature range for specification Terminating source impedance Terminating load impedance:

T = to

ZS = 50 ZL = 50

B9877 MHz

Center frequency

B9877
min. typ. max.

Maximum insertion attenuation MHz
αmax

VSWR Input MHz

VSWR Output MHz

Group delay ripple1 MHz
10 ns

Attenuation
1 Measured with aperture 2 MHz.

Please read cautions and warnings and important notes at the end of this document.
Type Ordering code Marking and package Packaging Date codes S-parameters Soldering profile RoHS compatible

Moldability Matching coils

B9877

B39162B9877P810

C61157-A8-A30

F61074-V8255-Z000

L_1126

B9877_NB.s2p, B9877_WB.s2p see file header for port/pin assignment table

S_6001

RoHS-compatible means that products are compatible with the requirements according to Art. 4 substance restrictions of Directive 2011/65/EU of the European Parliament and of the Council of June 8th, 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment "Directive" with due regard to the application of exemptions as per Annex III of the Directive in certain cases.

Before using in overmolding environment, please contact your EPCOS sales office.

See Inductor pdf-catalog
and Data Library for circuit simulation

For further information please contact your local EPCOS sales office or visit our webpage at

Published by EPCOS AG Systems, Acoustics, Waves Business Group P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives.

Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.

Please read cautions and warnings and important notes at the end of this document.
7 June 17, 2013

Important notes

The following applies to all products named in this publication:

Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product is suitable for use in a particular customer application.

We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health e.g. in accident prevention or life-saving systems , it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer e.g. installation of protective circuitry or redundancy that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component.

The warnings, cautions and notes must be observed. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions e.g. because they are classed as hazardous . Useful information on this will be found in our Material Data Sheets on the Internet Should you have any more detailed questions, please contact our sales We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product Please check therefore to what extent product descriptions and contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association ZVEI . The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at
8 June 17, 2013

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived B39162B9877P810 Datasheet file may be downloaded here without warranties.

Datasheet ID: B39162B9877P810 507258