783

783 Datasheet


PRODUCT ID 783

Part Datasheet
783 783 783 (pdf)
PDF Datasheet Preview
2 x 2032 Coin Cell Battery Holder - 6V output with On/Off switch

PRODUCT ID 783

This tiny coin cell battery holder is ideal for small portable or wearable projects. It holds two 20mm coin cells 2032 are the most popular size in series to generate 6V nominal. If you want only 3V, we suggest sticking a crumpled piece of tin foil in one of the slots. 20mm coin cells are popular as they are used in keychain lights, so they are easy to get, and fairly low cost. They tend to have about 220mAh capacity so this holder would give you 6V 220mAh with two cells.

The holder is made of plastic and snaps open and closed. You can tape it closed if you need more security than just the plastic snap. A nice extra is the on/off switch up top. We had the factory place a 2mm JST PH connector on the end but you can cut it off if you want to solder on a different connector.

This item does not include any 2032 coin cells. We do stock those separately, so if you want batteries to go with this, please pick up two of them!
11/12/2015

Technical Details

Weight grams when empty, grams with two 2032 batteries installed Size 53mm x 23mm x 6mm 6" long 150mm wires
More datasheets: G82-27000EU | TISP3240F3P | TISP3320F3SL | TISP3240F3SL | TISP3260F3P | TISP3260F3SL | TISP3290F3SL | TISP3320F3P | TISP3380F3P | TISP3380F3SL


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 783 Datasheet file may be downloaded here without warranties.

Datasheet ID: 783 514711