QVL25335

QVL25335 Datasheet

QVL25335

Part	Datasheet
QVL25335	QVL25335 (pdf)

PDF Datasheet Preview
SLOTTED OPTICAL SWITCH PACKAGE DIMENSIONS 2PLCS XX XXX SECTION X-X PIN IDENTIFICATION PIN 1 ANODE PIN 2 CATHODE PIN 3 COLLECTOR PIN 4 EMITTER NOTES Dimensions for all drawings are in inches mm . Tolerance of ± on all non-nominal dimensions unless otherwise specified. QVL25335 SCHEMATIC The QVL25335 consists of an infrared light emitting diode coupled to an NPN silicon photodarlington packaged into an injection molded housing. • 20 mm wide gap • PC Board mount • apertures • Sensor filter to attenuate visible light • High CTR 2001 Fairchild Semiconductor Corporation DS300380 11/29/01 1 OF 3 SLOTTED OPTICAL SWITCH QVL25335 ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise specified Symbol TOPR TSTG TSOL-I TSOL-F VR PD VCEO VECO IC PD Rating -40 to +85 -40 to +85 240 for 5 sec 260 for 10 sec 6 100 6 40 150 Unit °C °C °C °C V mA mW NOTES Derate power dissipation linearly mW/°C above 25°C. RMA flux is recommended. Methanol or isopropanol alcohols are recommended as cleaning agents. Soldering iron tip 1/16” mm minimum from housing. ELECTRICAL / OPTICAL CHARACTERISTICS TA =25°C TEST CONDITIONS UNITS IF = 20 mA VR = 5 V IE = 100 µA IC = 1 mA VCE = 10 V BVECO BVCEO ICEO IF = 10 mA, VCE = 5 V IC ON IF = 10 mA, IC = 2 mA VCE SAT

PDF Datasheet Preview

SLOTTED OPTICAL SWITCH

PACKAGE DIMENSIONS
2PLCS

XX XXX

SECTION X-X

PIN IDENTIFICATION

PIN 1 ANODE PIN 2 CATHODE PIN 3 COLLECTOR PIN 4 EMITTER

NOTES Dimensions for all drawings are in inches mm . Tolerance of ± on all non-nominal dimensions
unless otherwise specified.

QVL25335

SCHEMATIC

The QVL25335 consists of an infrared light emitting diode coupled to an NPN silicon photodarlington packaged into an injection molded housing.
• 20 mm wide gap
• PC Board mount
• apertures
• Sensor filter to attenuate visible light
• High CTR
2001 Fairchild Semiconductor Corporation DS300380 11/29/01
1 OF 3

SLOTTED OPTICAL SWITCH

QVL25335

ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise specified

Symbol TOPR TSTG TSOL-I TSOL-F

VR PD

VCEO

VECO IC PD

Rating -40 to +85 -40 to +85 240 for 5 sec 260 for 10 sec
6 100
6 40 150

Unit °C °C °C °C

V mA mW

NOTES Derate power dissipation linearly mW/°C above 25°C. RMA flux is recommended. Methanol or isopropanol alcohols are recommended as cleaning agents. Soldering iron tip 1/16” mm minimum from housing.

ELECTRICAL / OPTICAL CHARACTERISTICS TA =25°C

TEST CONDITIONS

UNITS

IF = 20 mA VR = 5 V

IE = 100 µA

IC = 1 mA VCE = 10 V

BVECO

BVCEO

ICEO

IF = 10 mA, VCE = 5 V

IC ON

IF = 10 mA, IC = 2 mA

VCE SAT

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived QVL25335 Datasheet file may be downloaded here without warranties.

Datasheet ID: QVL25335 634553