QVE00832C

QVE00832C Datasheet

QVE00832

Part	Datasheet
QVE00832C	QVE00832C (pdf)

PDF Datasheet Preview
PHOTOTRANSISTOR OPTICAL INTERRUPTER SWITCH QVE00832 PACKAGE DIMENSIONS CL OPTICAL 2X NOM MIN 4X PINS 4X SQ. TYP KNOB PIN 1 ANODE PIN 2 CATHODE PIN 3 COLLECTOR PIN 4 EMITTER NOTES Dimensions for all drawings are in inches millimeters . Tolerance of ± on all non-nominal dimensions unless otherwise specified. • No contact switching • 5mm wide slot • mm aperture width • Opaque black plastic housing • Locating knobs on housing base for accurate mounting • Transistor Output SCHEMATIC NOTES Derate power dissipation linearly mW/°C above 25°C. RMA flux is recommended. Methanol or isopropyl alcohols are recommended as cleaning agents. Soldering iron tip 1/16” 1.6mm from housing. ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise specified Symbol TOPR TSTG TSOL-I TSOL-F IF VR PD VCEO VECO IC PD Rating -55 to +100 -55 to +100 240 for 5 sec 260 for 10 sec 60 6 150 30 20 150 Units °C °C °C °C mA V mW V mA mW 2001 Fairchild Semiconductor Corporation DS300257 1/3/02 1 OF 4 PHOTOTRANSISTOR OPTICAL INTERRUPTER SWITCH QVE00832 ELECTRICAL / OPTICAL CHARACTERISTICS TA = 25°C PARAMETER TEST CONDITIONS UNITS IF = 20 mA VR = 4 V IF = 20 mA VCE = 10 V, IF = 0 mA IF = 20 mA, VCE = 10 V IF = 20 mA, IC = mA

PDF Datasheet Preview

PHOTOTRANSISTOR OPTICAL INTERRUPTER SWITCH

QVE00832

PACKAGE DIMENSIONS

CL OPTICAL
2X NOM

MIN 4X

PINS 4X

SQ. TYP

KNOB

PIN 1 ANODE PIN 2 CATHODE

PIN 3 COLLECTOR PIN 4 EMITTER

NOTES Dimensions for all drawings are in inches millimeters . Tolerance of ± on all non-nominal dimensions
unless otherwise specified.
• No contact switching
• 5mm wide slot
• mm aperture width
• Opaque black plastic housing
• Locating knobs on housing base
for accurate mounting
• Transistor Output

SCHEMATIC

NOTES

Derate power dissipation linearly mW/°C above 25°C. RMA flux is recommended. Methanol or isopropyl alcohols are recommended as
cleaning agents. Soldering iron tip 1/16” 1.6mm from housing.

ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise specified

Symbol TOPR TSTG TSOL-I TSOL-F

IF VR PD

VCEO VECO

IC PD

Rating -55 to +100 -55 to +100 240 for 5 sec 260 for 10 sec
60 6 150
30 20 150

Units °C °C °C °C
mA V mW

V mA mW
2001 Fairchild Semiconductor Corporation DS300257 1/3/02
1 OF 4

PHOTOTRANSISTOR OPTICAL INTERRUPTER SWITCH

QVE00832

ELECTRICAL / OPTICAL CHARACTERISTICS TA = 25°C

PARAMETER

TEST CONDITIONS

UNITS

IF = 20 mA VR = 4 V IF = 20 mA

VCE = 10 V, IF = 0 mA

IF = 20 mA, VCE = 10 V IF = 20 mA, IC = mA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived QVE00832C Datasheet file may be downloaded here without warranties.

Datasheet ID: QVE00832C 634551