QVE00112

QVE00112 Datasheet

QVE00112

Part	Datasheet
QVE00112	QVE00112 (pdf)

PDF Datasheet Preview
OPTICAL INTERRUPTER SWITCH PACKAGE DIMENSIONS OPTICAL CL 350 ± 7 GREEN GND WHITE VOUT GRAY VCC GRN WHT GRY QVE00112 NOTES Dimensions for all drawings are in inches millimeters . Tolerance of ± on all non-nominal dimensions unless otherwise Wire gauge 24 AWG, 7 strand, pre-tinned copper. • No contact switching • Mounting tab • Wire leads for remote connection • 3 mm slot • Output Inverter open-collector • TTL/CMOS compatible output • Aperture width: 2004 Fairchild Semiconductor Corporation Page 1 of 5 6/10/04 OPTICAL INTERRUPTER SWITCH QVE00112 ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise Parameter Operating Temperature Storage Temperature Soldering Temperature Iron 2,3,4 SENSOR Output Current Supply Voltage Output Voltage Power Dissipation 2 Symbol TOPR TSTG TSOL-I IF VR PD IO VCC VD PD Rating -40 to +85 -40 to +85 240 for 5 sec 50 5 100 50 16 30 150 NOTES Applies to Max Ratings and Characteristics Tables. Derate power dissipation linearly mW/°C above 25°C. Derate power dissipation linearly mW/°C above 25°C. RMA is recommended. Methanol or isopropyl alcohols are recommended as cleaning agents. Units °C °C °C mA V mW mA V mW ELECTRICAL/OPTICAL CHARACTERISTICS TA =25°C PARAMETER TEST CONDITIONS IF = 20 mA VR = 5 V VCC = 16 V VCC = 5 V, RL = 360 VCC = 5 V, VOH = 30 V Light Path Blocked VCC = 5 V, RL = 360 VCC = 5 V, RL = 360 tPLH, tPHL tr, tf MIN. TYP.

PDF Datasheet Preview

OPTICAL INTERRUPTER SWITCH

PACKAGE DIMENSIONS

OPTICAL CL
350 ± 7

GREEN GND WHITE VOUT GRAY VCC

GRN WHT GRY

QVE00112

NOTES Dimensions for all drawings are in inches millimeters . Tolerance of ± on all non-nominal dimensions unless otherwise

Wire gauge 24 AWG, 7 strand, pre-tinned copper.
• No contact switching
• Mounting tab
• Wire leads for remote connection
• 3 mm slot
• Output Inverter open-collector
• TTL/CMOS compatible output
• Aperture width:
2004 Fairchild Semiconductor Corporation

Page 1 of 5
6/10/04

OPTICAL INTERRUPTER SWITCH

QVE00112

ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise

Parameter

Operating Temperature Storage Temperature Soldering Temperature Iron 2,3,4

SENSOR Output Current Supply Voltage Output Voltage Power Dissipation 2

Symbol TOPR TSTG TSOL-I

IF VR PD

IO VCC VD PD

Rating -40 to +85 -40 to +85 240 for 5 sec
50 5 100
50 16 30 150

NOTES Applies to Max Ratings and Characteristics Tables. Derate power dissipation linearly mW/°C above 25°C. Derate power dissipation linearly mW/°C above 25°C. RMA is recommended. Methanol or isopropyl alcohols are recommended as cleaning agents.

Units °C °C °C
mA V mW
mA V mW

ELECTRICAL/OPTICAL CHARACTERISTICS TA =25°C

PARAMETER

TEST CONDITIONS

IF = 20 mA

VR = 5 V

VCC = 16 V

VCC = 5 V, RL = 360

VCC = 5 V, VOH = 30 V Light Path Blocked

VCC = 5 V, RL = 360 VCC = 5 V, RL = 360
tPLH, tPHL tr, tf

MIN.

TYP.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived QVE00112 Datasheet file may be downloaded here without warranties.

Datasheet ID: QVE00112 634548