ILC6383CIR33X

ILC6383CIR33X Datasheet

ILC6383

Part	Datasheet
ILC6383CIR33X	ILC6383CIR33X (pdf)

Related Parts	Information
ILC6383CIRADJX	ILC6383CIRADJX
ILC6383CIR50X	ILC6383CIR50X

PDF Datasheet Preview
ILC6383 1-Cell to 3-Cell Boost DC-DC Converter with True Load Disconnect, 3.3V, 5V or Adjustable Output • Guaranteed start up in PWM at 0.9V input • Synchronous requires no external diode • True load disconnect from battery input in shutdown • Up to 75mA at 3.3V and 40mA at 5V from 1V input • Up to 375mA at 3.3V and 300mA at 5V from 3V input • Peak > 90% • 1µA battery input current in shutdown with VOUT = 0V • Internal Oscillator frequency 300kHz to ±15% • ILC6383 Fixed 3.3V or 5V output • ILC6383-ADJ Adjustable output to 6V maximum • Low battery detector with 100ms transient rejection delay • Powergood output when VOUT is in regulation • Cellular Phones, Pagers • Palmtops, PDAs and portable electronics • High 1V step up converters The ILC6383 series of step-up DC-DC converters operate from 1-cell to 3-cell input. They are direct replacement for ILC6382, in applications where SYNC pin is not used. The PFM or PWM operating mode is user selectable through SEL pin connected to ground or left open, respectively. The choice should be dependent upon the current to be delivered to the load PFM is recommended for input voltage higher than 1.5V and loads below 100mA, while PWM is recommended for more than 50mA load current and in noise sensitive applications. In shutdown mode, the device allows true load disconnect from battery input. Designed for wireless communications applications, the oscillator frequency is set at 300kHz with no harmonics at sub 20kHz audio band or at 455kHz IF band. Internal synchronous and externally selectable PFM/PWM mode of operation allows the selection of the best at light or full load. The ILC6383 is capable of delivering 75mA at 3.3V output from a single cell input. The ILC6383-XX offers 3.3V or 5V output voltage while the ILC6383-ADJ allows adjustable output voltage to 6V maximum. Output voltage accuracy is over full operating temperature range. Additional features include power good output POK and an internal low battery detector with 100ms transient rejection delay. The device will reject low battery input transients under 100ms in duration. The ILC6383 series is available in a space saving eight lead micro SOP MSOP-8 package. 47µF VIN 1 to 3-cell ON OFF 15µH R5 R6 ILC6383-XX LX VOUT 8 2 VIN GND 7 3 LBI/SD LBO 6 4 SEL POK 5 PWM PFM MSOP-8 + 47µF VOUT COUT Low Battery Detector Output Power Good Output Figure ILC6383CIR-XX CIN 47µF VIN 1 to 3-cell ON OFF 15µH R5 R6 ILC6383-ADJ LX VOUT 8 2 VIN GND 7 3 LBI/SD LBO 6 4 SEL VFB 5 PWM PFM MSOP-8 + COUT 47µF VOUT R2 VOUT = 1+R1/R2 Figure ILC6383CIR-ADJ ILC6383 Ordering Information for Ta = -40°C to +85°C, MSOP-8 Package Part Number ILC6383CIR33X ILC6383CIR50X ILC6383CIRADJX Output Voltage 3.3V 5.0V Adjustable DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: Life support devices or systems are devices or systems which, a are intended for surgical implant into the body, or b support or sustain life, and c whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 6/13/02 0.0m 003 Stock#DS30006383 Fairchild Semiconductor Corporation

PDF Datasheet Preview

ILC6383
1-Cell to 3-Cell Boost DC-DC Converter with True Load Disconnect, 3.3V, 5V or Adjustable Output
• Guaranteed start up in PWM at 0.9V input
• Synchronous requires no external diode
• True load disconnect from battery input in shutdown
• Up to 75mA at 3.3V and 40mA at 5V from 1V input
• Up to 375mA at 3.3V and 300mA at 5V from 3V input
• Peak > 90%
• 1µA battery input current in shutdown with VOUT = 0V
• Internal Oscillator frequency 300kHz to ±15%
• ILC6383 Fixed 3.3V or 5V output
• ILC6383-ADJ Adjustable output to 6V maximum
• Low battery detector with 100ms transient rejection delay
• Powergood output when VOUT is in regulation
• Cellular Phones, Pagers
• Palmtops, PDAs and portable electronics
• High 1V step up converters

The ILC6383 series of step-up DC-DC converters operate from 1-cell to 3-cell input. They are direct replacement for ILC6382, in applications where SYNC pin is not used. The PFM or PWM operating mode is user selectable through SEL pin connected to ground or left open, respectively. The choice should be dependent upon the current to be delivered to the load PFM is recommended for input voltage higher than 1.5V and loads below 100mA, while PWM is recommended for more than 50mA load current and in noise sensitive applications. In shutdown mode, the device allows true load disconnect from battery input. Designed for wireless communications applications, the oscillator frequency is set at 300kHz with no harmonics at sub 20kHz audio band or at 455kHz IF band.

Internal synchronous and externally selectable PFM/PWM mode of operation allows the selection of the best at light or full load. The ILC6383 is capable of delivering 75mA at 3.3V output from a single cell input. The ILC6383-XX offers 3.3V or 5V output voltage while the ILC6383-ADJ allows adjustable output voltage to 6V maximum. Output voltage accuracy is over full operating temperature range.

Additional features include power good output POK and an internal low battery detector with 100ms transient rejection delay. The device will reject low battery input transients under 100ms in duration. The ILC6383 series is available in a space saving eight lead micro SOP MSOP-8 package.
47µF

VIN 1 to 3-cell

ON OFF
15µH R5 R6

ILC6383-XX

LX VOUT 8
2 VIN

GND 7
3 LBI/SD LBO 6
4 SEL POK 5

PWM PFM

MSOP-8
+ 47µF VOUT COUT

Low Battery Detector Output

Power Good Output

Figure ILC6383CIR-XX

CIN 47µF

VIN 1 to 3-cell

ON OFF
15µH R5 R6

ILC6383-ADJ

LX VOUT 8
2 VIN

GND 7
3 LBI/SD LBO 6
4 SEL

VFB 5

PWM PFM

MSOP-8
+ COUT 47µF

VOUT

R2 VOUT = 1+R1/R2

Figure ILC6383CIR-ADJ

ILC6383
Ordering Information for Ta = -40°C to +85°C, MSOP-8 Package

Part Number ILC6383CIR33X ILC6383CIR50X ILC6383CIRADJX

Output Voltage 3.3V 5.0V

Adjustable

DISCLAIMER

FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein:

Life support devices or systems are devices or systems which, a are intended for surgical implant into the body, or b support or sustain life, and c whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user.

A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
6/13/02 0.0m 003 Stock#DS30006383 Fairchild Semiconductor Corporation

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ILC6383CIR33X Datasheet file may be downloaded here without warranties.

Datasheet ID: ILC6383CIR33X 634023