FSD200

FSD200 Datasheet

FSD210, FSD200

Part	Datasheet
FSD200	FSD200 (pdf)

Related Parts	Information
FSD210	FSD210

PDF Datasheet Preview
FSD210, FSD200 Green Mode Fairchild Power Switch FPSTM • Single Chip 700V Sense FET Power Switch • Precision Fixed Operating Frequency 134kHz • Advanced Burst-Mode operation Consumes under 0.1W at 265Vac and no load FSD210 only • Internal Start-up Switch and Soft Start • Under Voltage Lock Out UVLO with Hysteresis • Pulse by Pulse Current Limit • Over Load Protection OLP • Internal Thermal Shutdown Function TSD • Auto-Restart Mode • Frequency Modulation for EMI • FSD200 does not require an auxiliary bias winding • Charger & Adaptor for Mobile Phone, PDA & MP3 • Auxiliary Power for White Goods, PC, C-TV & Monitor The FSD200 and FSD210 are integrated Pulse Width Modulators PWM and Sense FETs specially designed for high performance off-line Switch Mode Power Supplies SMPS with minimal external components. Both devices are monolithic high voltage power switching regulators which combine an LDMOS Sense FET with a voltage mode PWM control block. The integrated PWM controller features include a fixed oscillator with frequency modulation for reduced EMI, Under Voltage Lock Out UVLO protection, Leading Edge Blanking LEB , optimized gate turn-on/turnoff driver, thermal shut down protection TSD , temperature compensated precision current sources for loop compensation and fault protection circuitry. When compared to a discrete MOSFET and controller or RCC switching converter solution, the FSD200 and FSD210 reduce total component count, design size, weight and at the same time increase efficiency, productivity, and system reliability. The FSD200 eliminates the need for an auxiliary bias winding at a small cost of increased supply power. Both devices are a basic platform well suited for cost effective designs of flyback converters. PRODUCT FSD210 FSD200 FSD210M FSD200M OUTPUT POWER TABLE 230VAC ±15% 3 85-265VAC Adapter 1 Open Frame 2 Adapter 1 Open Frame 2 Table Notes Typical continuous power in a non-ventilated enclosed adapter measured at 50°C ambient. Maximum practical continuous power in an open frame design at 50°C ambient. 230 VAC or 100/115 VAC with doubler. Typical Circuit AC IN Vstr Drain PWM Source DC OUT Figure Typical Flyback Application using FSD210 AC IN Vstr Drain PWM Source DC OUT 2004 Fairchild Semiconductor Corporation FSD210, FSD200 Internal Block Diagram Vcc 5 UVLO Voltage Ref 5uA 250uA Frequency Modulation Vfb 4 BURST V BURST Reset OLP TSD Internal Bias 8.7/6.7V Vck Vstr 8 DRIVER Ordering Information Product Number FSD210 FSD200 FSD210M FSD200M Package 7DIP 7LSOP Rating 700V, 0.5A 700V, 0.5A 700V, 0.5A 700V, 0.5A Topr °C −25°C to +85°C −25°C to +85°C −25°C to +85°C −25°C to +85°C DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: Life support devices or systems are devices or systems which, a are intended for surgical implant into the body, or b support or sustain life, and c whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 6/21/04 0.0m 001 2004 Fairchild Semiconductor Corporation

PDF Datasheet Preview

FSD210, FSD200

Green Mode Fairchild Power Switch FPSTM
• Single Chip 700V Sense FET Power Switch
• Precision Fixed Operating Frequency 134kHz
• Advanced Burst-Mode operation Consumes under 0.1W
at 265Vac and no load FSD210 only
• Internal Start-up Switch and Soft Start
• Under Voltage Lock Out UVLO with Hysteresis
• Pulse by Pulse Current Limit
• Over Load Protection OLP
• Internal Thermal Shutdown Function TSD
• Auto-Restart Mode
• Frequency Modulation for EMI
• FSD200 does not require an auxiliary bias winding
• Charger & Adaptor for Mobile Phone, PDA & MP3
• Auxiliary Power for White Goods, PC, C-TV & Monitor

The FSD200 and FSD210 are integrated Pulse Width Modulators PWM and Sense FETs specially designed for high performance off-line Switch Mode Power Supplies SMPS with minimal external components. Both devices are monolithic high voltage power switching regulators which combine an LDMOS Sense FET with a voltage mode PWM control block. The integrated PWM controller features include a fixed oscillator with frequency modulation for reduced EMI, Under Voltage Lock Out UVLO protection, Leading Edge Blanking LEB , optimized gate turn-on/turnoff driver, thermal shut down protection TSD , temperature compensated precision current sources for loop compensation and fault protection circuitry. When compared to a discrete MOSFET and controller or RCC switching converter solution, the FSD200 and FSD210 reduce total component count, design size, weight and at the same time increase efficiency, productivity, and system reliability. The FSD200 eliminates the need for an auxiliary bias winding at a small cost of increased supply power. Both devices are a basic platform well suited for cost effective designs of flyback converters.

PRODUCT

FSD210 FSD200 FSD210M FSD200M

OUTPUT POWER TABLE
230VAC ±15% 3
85-265VAC

Adapter 1

Open Frame 2

Adapter 1

Open Frame 2

Table Notes Typical continuous power in a non-ventilated enclosed adapter measured at 50°C ambient. Maximum practical continuous power in an open frame design at 50°C ambient. 230 VAC or 100/115 VAC with doubler.

Typical Circuit

AC IN

Vstr Drain PWM

Source

DC OUT

Figure Typical Flyback Application using FSD210

AC IN

Vstr Drain PWM

Source

DC OUT
2004 Fairchild Semiconductor Corporation

FSD210, FSD200

Internal Block Diagram

Vcc 5

UVLO

Voltage Ref
5uA 250uA

Frequency Modulation

Vfb 4

BURST V BURST

Reset

OLP TSD

Internal Bias 8.7/6.7V Vck

Vstr 8

DRIVER
Ordering Information

Product Number FSD210 FSD200 FSD210M FSD200M

Package 7DIP
7LSOP

Rating 700V, 0.5A 700V, 0.5A 700V, 0.5A 700V, 0.5A

Topr °C −25°C to +85°C −25°C to +85°C −25°C to +85°C −25°C to +85°C

DISCLAIMER

FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein:

Life support devices or systems are devices or systems which, a are intended for surgical implant into the body, or b support or sustain life, and c whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user.

A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
6/21/04 0.0m 001 2004 Fairchild Semiconductor Corporation

More datasheets: CT-1020 | FJP3835TU | AT26DF321-SU | 26800C-553 | M5423 SL005 | M5423 SL002 | M5423 SL001 | 102990925 | CAN-DEMOBOARD1 | FSD210

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FSD200 Datasheet file may be downloaded here without warranties.

Datasheet ID: FSD200 515521