FSAU3157P6X

FSAU3157P6X Datasheet


NC7SBU3157, FSAU3157 Low-Voltage SPDT Analog Switch or 2:1 Multiplexer / De-multiplexer Bus Switch

Part Datasheet
FSAU3157P6X FSAU3157P6X FSAU3157P6X (pdf)
PDF Datasheet Preview
NC7SBU3157, FSAU3157 Low-Voltage SPDT Analog Switch or 2:1 Multiplexer / De-multiplexer Bus Switch

April 2008

NC7SBU3157, FSAU3157 Low-Voltage SPDT Analog Switch or 2:1 Multiplexer / De-multiplexer Bus Switch
• Analog and digital applications
• Space-saving, SC70 6-lead, surface-mount package
• Low on resistance <10Ω on typical at 3.3V VCC
• Broad VCC operating range 1.65V to 5.5V
• Rail-to-rail signal handling
• Power-down, high-impedance control input
• Over-voltage tolerance of control input to 7.0V
• Break-before-make enable circuitry
• 250 MHz, 3dB bandwidth

The NC7SBU3157 / FSAU3157 is a high-performance, single-pole / double-throw SPDT analog switch or 2:1 multiplexer / de-multiplexer bus switch.

The device is fabricated with advanced sub-micron CMOS technology to achieve high-speed enable and disable times and low on resistance. The break-beforemake select circuitry prevents disruption of signals on the B port due to both switches temporarily being enabled during select pin switching. The device is specified to operate over the to 5.5V VCC operating range. The control input tolerates voltages up to 5.5V, independent of the VCC operating range.

Fairchild's integrated Undershoot Hardened Circuit senses undershoot at the I/Os, and responds by preventing voltage differentials from developing and turning the switch on.
Ordering Information

Part Number NC7SBU3157P6X FSAU3157P6X

Top Mark B7A

Operating Temperature

Range

Package Description

Packing Method
-40 to +85°C
6-Lead, SC70, EIAJ SC88, 1.25mm Wide Package
3000 Units Tape and Reel
-40 to +85°C
6-Lead, SC70, EIAJ SC88, 1.25mm Wide Package
3000 Units Tape and Reel

All packages are lead free per JEDEC J-STD-020B standard.

MicroPak is a trademark of Fairchild Semiconductor Corporation.
is a registered trademark of Fairchild Semiconductor Corporation.

NC7SBU3157, FSAU3157 Low-Voltage SPDT Analog Switch or 2:1 Multiplexer / De-multiplexer Bus Switch

Logic Symbol

Figure Logic Symbol

Analog Symbol

Figure Analog Symbol

Function Table

Input S Logic Level Low Logic Level High

Function B0 Connected to A B1 Connected to A

Pin Descriptions

Pin Names A, B0, B1 S

Description Data Ports Control Input

Connection Diagrams

Pin Assignments SC70

Figure Pin One Orientation Note Orientation of top mark determines pin one location. Read the top mark left to right and pin one is the lower left pin see Figure
2005 Fairchild Semiconductor Corporation

NC7SBU3157, FSAU3157 Low-Voltage SPDT Analog Switch or 2:1 Multiplexer / De-multiplexer Bus Switch

Absolute Maximum Ratings

Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only

Parameter

Min. Max. Units

Supply Voltage

DC Switch Voltage 1

DC Input Voltage 1

IIK IOUT

DC Input Diode Current at VIN < 0V DC Output Current
More datasheets: MS4015F | CY28158OXCT | CY28158OXC | CYV15G0101DXB-BBXI | CYW15G0101DXB-BBI | CYV15G0101DXB-BBI | CYW15G0101DXB-BBXI | CYV15G0101DXB-BBC | CYP15G0101DXB-BBI | CYW15G0101DXB-BBC


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FSAU3157P6X Datasheet file may be downloaded here without warranties.

Datasheet ID: FSAU3157P6X 515489