FODB101

FODB101 Datasheet

FODB100, FODB101, FODB102 Single Channel Microcoupler

Part	Datasheet
FODB101	FODB101 (pdf)

Related Parts	Information
FODB100	FODB100
FODB102	FODB102
FODB100V	FODB100V
FODB101V	FODB101V
FODB102V	FODB102V

PDF Datasheet Preview
FODB100, FODB101, FODB102 Single Channel Microcoupler July 2006 FODB100, FODB101, FODB102 tm Single Channel Microcoupler • Low package 1.20mm maximum mounted height • Land pattern allows for optimum board space savings • High Current Transfer Ratio CTR at low IF • Minimum isolation distance of 0.45mm • High steady state isolation voltage of 2500Vrms • Data rates up to 120Kbit/s NRZ • Minimum creepage distance of 2mm • Wide operating temperature range of -40°C to +125°C • Available in tape and reel quantities of 3000 units • Applicable to Pb-free Infrared Ray 260°C max • UL and VDE approved • Primarily suited for DC-DC converters • For ground loop isolation, signal to noise isolation Communications chargers, adapters Consumer appliances, set top boxes Industrial power supplies, motor control The FODB100, FODB101 and FODB102 single channel MICROCOUPLERS are all Pb-free, low miniature surface mount optocouplers in a Ball Grid Array BGA package. Each consists of an aluminum gallium arsenide AlGaAs infrared emitting diode driving a silicon phototransistor. Schematic ANODE 1 CATHODE 2 4 COLLECTOR 3 EMITTER Package Dimensions BALL #1 INDICATOR BOTTOM VIEW MAX MIN TOP VIEW MAX MIN MAX C SEATING PLANE MAX MIN NOTES UNLESS OTHERWISE SPECIFIED A ALL DIMENSIONS ARE IN MILLIMETERS. B NO JEDEC REGISTRATION REFERENCE AS OF NOVEMBER 2004 Fairchild Semiconductor Corporation FODB100, FODB101, FODB102 Single Channel Microcoupler Absolute Maximum Ratings TA = 25°C Unless otherwise Parameter TOTAL PACKAGE TSTG Storage Temperature TOPR Operating Temperature Junction Temperature EMITTER IF avg Continuous Forward Current Power Dissipation Derate linearly above 25°C DETECTOR

PDF Datasheet Preview

FODB100, FODB101, FODB102 Single Channel Microcoupler

July 2006

FODB100, FODB101, FODB102 tm

Single Channel Microcoupler
• Low package 1.20mm maximum mounted height
• Land pattern allows for optimum board space savings
• High Current Transfer Ratio CTR at low IF
• Minimum isolation distance of 0.45mm
• High steady state isolation voltage of 2500Vrms
• Data rates up to 120Kbit/s NRZ
• Minimum creepage distance of 2mm
• Wide operating temperature range of -40°C to +125°C
• Available in tape and reel quantities of 3000 units
• Applicable to Pb-free Infrared Ray 260°C max
• UL and VDE approved
• Primarily suited for DC-DC converters
• For ground loop isolation, signal to noise isolation

Communications chargers, adapters Consumer appliances, set top boxes Industrial power supplies, motor control

The FODB100, FODB101 and FODB102 single channel MICROCOUPLERS are all Pb-free, low miniature surface mount optocouplers in a Ball Grid Array BGA package. Each consists of an aluminum gallium arsenide AlGaAs infrared emitting diode driving a silicon phototransistor.

Schematic

ANODE 1 CATHODE 2
4 COLLECTOR 3 EMITTER

Package Dimensions

BALL #1

INDICATOR

BOTTOM VIEW

MAX MIN

TOP VIEW

MAX MIN

MAX C

SEATING PLANE

MAX MIN

NOTES UNLESS OTHERWISE SPECIFIED

A ALL DIMENSIONS ARE IN MILLIMETERS. B NO JEDEC REGISTRATION REFERENCE AS

OF NOVEMBER
2004 Fairchild Semiconductor Corporation

FODB100, FODB101, FODB102 Single Channel Microcoupler

Absolute Maximum Ratings TA = 25°C Unless otherwise

Parameter

TOTAL PACKAGE

TSTG

Storage Temperature

TOPR

Operating Temperature

Junction Temperature

EMITTER

IF avg

Continuous Forward Current

Power Dissipation

Derate linearly above 25°C

DETECTOR

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FODB101 Datasheet file may be downloaded here without warranties.

Datasheet ID: FODB101 514967