FOD2711T

FOD2711T Datasheet


FOD2711

Part Datasheet
FOD2711T FOD2711T FOD2711T (pdf)
Related Parts Information
FOD2711TV FOD2711TV FOD2711TV
FOD2711 FOD2711 FOD2711
FOD2711SV FOD2711SV FOD2711SV
FOD2711V FOD2711V FOD2711V
FOD2711SD FOD2711SD FOD2711SD
FOD2711S FOD2711S FOD2711S
FOD2711SDV FOD2711SDV FOD2711SDV
PDF Datasheet Preview
OPTICALLY ISOLATED ERROR AMPLIFIER

FOD2711

The FOD2711 Optically Isolated consists of the popular RC431A precision programmable shunt reference and an optocoupler. The optocoupler is a gallium arsenide GaAs light emitting diode optically coupled to a silicon phototransistor. The reference voltage tolerance is The current transfer ratio CTR ranges from 100% to

It is primarily intended for use as the error voltage/optocoupler function in isolated ac to dc power supplies and dc/dc converters.

When using the FOD2711, power supply designers can reduce the component count and
save space in tightly packaged designs. The tight tolerance reference eliminates the need
for adjustments in many applications.

The device comes in a 8-pin dip white package.
• Optocoupler, precision reference and error in single package
• 1.240V ± 1% reference
• CTR 100% to 200%
• 5,000V RMS isolation
• UL approval E90700, Volume 2

CSA approval 1296837 VDE approval 40002463 BSI approval 8702, 8703
• Power supplies regulation
• DC to DC converters

FUNCTIONAL BLOCK DIAGRAM

NC 1 C2 E3
8 LED 7 FB 6 COMP 5 GND

PIN DEFINITIONS

Pin Number
1 2 3 4 5 6 7 8

Pin Name

NC C E NC GND COMP FB LED

Pin function description

Not connected Phototransistor Collector Phototransistor Emitter Not connected Ground Error Compensation. This pin is the output of the error * Voltage Feedback. This pin is the inverting input to the error Anode LED. This pin is the input to the light emitting diode.
* The compensation network must be attached between pins 6 and
2002 Fairchild Semiconductor Corporation

Page 1 of 14
9/6/02

OPTICALLY ISOLATED ERROR AMPLIFIER

FOD2711

FAN4803

Control

FOD2711

R1 R2

ABSOLUTE MAXIMUM RATINGS TA = 25°C Unless otherwise

Parameter

Value

Units

Storage Temperature Operating Temperature Lead Solder Temperature Input Voltage Input DC Current Collector-Emitter Voltage Emitter-Collector Voltage Collector Current Input Power Dissipation note 1 Transistor Power Dissipation note 2 Total Power Dissipation note 3

TSTG
-55 to +125

TOPR
-40 to +85

TSOL
ORDERING INFORMATION

Example FOD2711

X Packaging Option T Lead Spacing S Surface Mount Lead Bend SR2 Surface Mount Tape and Reel 1000 per reel

Y V VDE tested

Carrier Tape "R2" Taping Orientation
d User Direction of Feed

Description Tape Width Tape Thickness Sprocket Hole Pitch Sprocket Hole Diameter Sprocket Hole Location

Pocket Location

Pocket Pitch

Pocket Dimensions

Cover Tape Width Cover Tape Thickness Max. Component Rotation or Tilt Min. Bending Radius

Symbol W t P0 D0 E F P2 P A0 B0 K0 W1 d
2002 Fairchild Semiconductor Corporation

Page 12 of 14

FOD2711

Dimension in mm ± ± ± ± ± ± ± ± ± max 10° 30
9/6/02

OPTICALLY ISOLATED ERROR AMPLIFIER

FOD2711

Fig.21 Recommended IR Reflow Profile
• Peak reflow temperature
• Time of temperature higher than 245°C
• Number of reflows
260° C package surface temperature 40 seconds or less Three
260°
245°
150 40 s

Time s

Temperature °C
2002 Fairchild Semiconductor Corporation

Page 13 of 14
9/6/02

OPTICALLY ISOLATED ERROR AMPLIFIER

FOD2711

DISCLAIMER

FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein:

Life support devices or systems are devices or systems which, a are intended for surgical implant into the body, or b support or sustain life, and c whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user.

A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
2002 Fairchild Semiconductor Corporation

Page 14 of 14
9/6/02
More datasheets: ATA5761N-TGSY | ATA5761N-TGQY | ATA5760N3-TGQY | DDM-HTT-RI-1 | DDM-MTT-1 | DDM-09S-109A-TR | DDM-09S-109A-TG30 | DDM-09S-209A-TR | 26800B-555 | AT103726 VI005


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FOD2711T Datasheet file may be downloaded here without warranties.

Datasheet ID: FOD2711T 514958