FMS6400CSX

FMS6400CSX Datasheet

FMS6400 Dual Channel Video Drivers with Integrated Filters and Composite Video Summer

Part	Datasheet
FMS6400CSX	FMS6400CSX (pdf)

Related Parts	Information
FMS6400CS1X	FMS6400CS1X
FMS6400CS1	FMS6400CS1
FMS6400CS	FMS6400CS

PDF Datasheet Preview
FMS6400 Dual Channel Video Drivers with Integrated Filters and Composite Video Summer September 2005 FMS6400 Dual Channel Video Drivers with Integrated Filters and Composite Video Summer • MHz 5th order Y,C filters with composite summer • Selectable for 0dB or 6dB gain • 50dB stopband attenuation at 27MHz on Y, C and CV outputs • Better than dB flatness to 4.5MHz on Y,C and CV outputs • No external frequency selection components or clocks • < 5ns group delay deviation on Y, C and CV outputs • AC-Coupled Inputs • AC or DC-Coupled Outputs • Capable of PAL frequency selection components or clocks • / differential gain/phase on Y,C and CV channels • Integrated DC restore circuitry with low tilt • Lead Pb Free SOIC-8 Package • Cable and Satellite set top boxes • DVD players • Personal Video Recorders PVR • Video On Demand VOD The FMS6400 is a dual Y/C 5th order Butterworth lowpass video filter optimized for minimum overshoot and flat group delay. The device also contains a summing circuit to generate filtered composite video. In a typical application, the Y and C input signals from DACs are AC coupled into the filters. Both channels have DC restore circuitry to clamp the DC input levels during video sync. The Y and C channels use separate feedback clamps. The clamp pulse is derived from the Y channel. All outputs are capable of driving 2Vpp, AC or DC coupled, into either a single or dual video load. A single video load consists of a series impedance matching resistor connected to a terminated line. This presents a total of loading to the part. A dual load would be two of these in parallel which would present a total of to the part. The gain of the Y, C and CV signals can be selected for 0dB or 6dB with 1Vpp input levels. All video channels are clamped during sync to establish the appropriate output voltage reference levels. The FMS6400 typical cutoff frequency is 7.1MHz. Option for a lower cutoff frequency of 5MHz is available. Please refer to the FMS6400-1 datasheet for further information. Block Diagrams YIN 1 Sync Strip Reference and Timing VCC 7 0 or 6dB 8 YOUT CIN 4 250mV 250mV 0 or 6dB 3 GND 6 CVOUT 2 ASEL 5 COUT 2004 Fairchild Semiconductor Corporation FMS6400 Dual Channel Video Drivers with Integrated Filters and Composite Video Summer Pin Configuration YIN 1 ASEL 2 GND 3 CIN 4 FAIRCHILD FMS6400 8L SOIC Pin Assignments Pin# 8 YOUT 7 VCC 6 CVOUT 5 COUT ASEL GND CIN COUT CVOUT VCC YOUT Type Input Luminance Luma Input In a typical system, this pin is connected to the Luma or composite video output pin from the external video encoder. Input Channel Gain Select. ‘0’= 0dB, ‘1’ = 6dB Ordering Information Model FMS6400 Part Number FMS6400CS FMS6400CSX Lead Free Yes Package SOIC-8 SOIC-8 Container Rail Reel Pack Qty 95 2500 Temperature range for all parts 0°C to 70°C. FMS6400 Dual Channel Video Drivers with Integrated Filters and Composite Video Summer TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx FACT Quiet Series ISOPLANAR SuperFET ActiveArray LittleFET Power247 SuperSOT -3 Bottomless FASTr MICROCOUPLER SuperSOT -6 CoolFET MicroFET SuperSOT -8 CROSSVOLT FRFET MicroPak SyncFET DOME GlobalOptoisolator MICROWIRE QT Optoelectronics EcoSPARK GTO Quiet Series TINYOPTO E2CMOSTM HiSeC MSXPro RapidConfigure TruTranslation EnSignaTM FACT ImpliedDisconnect OCXPro RapidConnect

PDF Datasheet Preview

FMS6400 Dual Channel Video Drivers with Integrated Filters and Composite Video Summer

September 2005

FMS6400 Dual Channel Video Drivers with Integrated Filters and Composite Video Summer
• MHz 5th order Y,C filters with composite summer
• Selectable for 0dB or 6dB gain
• 50dB stopband attenuation at 27MHz on Y, C and CV outputs
• Better than dB flatness to 4.5MHz on Y,C and CV outputs
• No external frequency selection components or clocks
• < 5ns group delay deviation on Y, C and CV outputs
• AC-Coupled Inputs
• AC or DC-Coupled Outputs
• Capable of PAL frequency selection components or clocks
• / differential gain/phase on Y,C and CV channels
• Integrated DC restore circuitry with low tilt
• Lead Pb Free SOIC-8 Package
• Cable and Satellite set top boxes
• DVD players
• Personal Video Recorders PVR
• Video On Demand VOD

The FMS6400 is a dual Y/C 5th order Butterworth lowpass video filter optimized for minimum overshoot and flat group delay. The device also contains a summing circuit to generate filtered composite video. In a typical application, the Y and C input signals from DACs are AC coupled into the filters. Both channels have DC restore circuitry to clamp the DC input levels during video sync. The Y and C channels use separate feedback clamps. The clamp pulse is derived from the Y channel.

All outputs are capable of driving 2Vpp, AC or DC coupled, into either a single or dual video load. A single video load consists of a series impedance matching resistor connected to a terminated line. This presents a total of loading to the part. A dual load would be two of these in parallel which would present a total of to the part. The gain of the Y, C and CV signals can be selected for 0dB or 6dB with 1Vpp input levels. All video channels are clamped during sync to establish the appropriate output voltage reference levels.

The FMS6400 typical cutoff frequency is 7.1MHz. Option for a lower cutoff frequency of 5MHz is available. Please refer to the FMS6400-1 datasheet for further information.

Block Diagrams

YIN 1

Sync Strip Reference and

Timing

VCC 7
0 or 6dB
8 YOUT

CIN 4
250mV
250mV
0 or 6dB
3 GND
6 CVOUT
2 ASEL
5 COUT
2004 Fairchild Semiconductor Corporation

FMS6400 Dual Channel Video Drivers with Integrated Filters and Composite Video Summer

Pin Configuration

YIN 1 ASEL 2 GND 3

CIN 4

FAIRCHILD FMS6400 8L SOIC

Pin Assignments

Pin#
8 YOUT
7 VCC
6 CVOUT
5 COUT

ASEL GND CIN

COUT CVOUT VCC YOUT

Type

Input

Luminance Luma Input In a typical system, this pin is connected to the Luma or composite video output pin from the external video encoder.

Input Channel Gain Select. ‘0’= 0dB, ‘1’ = 6dB
Ordering Information

Model FMS6400

Part Number FMS6400CS FMS6400CSX

Lead Free Yes

Package SOIC-8 SOIC-8

Container Rail Reel

Pack Qty 95 2500

Temperature range for all parts 0°C to 70°C.

FMS6400 Dual Channel Video Drivers with Integrated Filters and Composite Video Summer

TRADEMARKS

The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.

ACEx

FACT Quiet Series ISOPLANAR

SuperFET

ActiveArray

LittleFET

Power247

SuperSOT -3

Bottomless FASTr

MICROCOUPLER

SuperSOT -6

CoolFET

MicroFET

SuperSOT -8

CROSSVOLT FRFET

MicroPak

SyncFET

DOME

GlobalOptoisolator MICROWIRE

QT Optoelectronics

EcoSPARK GTO

Quiet Series

TINYOPTO

E2CMOSTM

HiSeC

MSXPro

RapidConfigure

TruTranslation

EnSignaTM FACT

ImpliedDisconnect OCXPro

RapidConnect

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FMS6400CSX Datasheet file may be downloaded here without warranties.

Datasheet ID: FMS6400CSX 514924