FAN8100N

FAN8100N Datasheet

FAN8100N/FAN8100MTC

Part	Datasheet
FAN8100N	FAN8100N (pdf)

Related Parts	Information
FAN8100MTC	FAN8100MTC

PDF Datasheet Preview
FAN8100N/FAN8100MTC Low Voltage/Low Saturation 2-CH DC Motor Driver • Two channel H-bridge drivers with built-in NPN and vertical-PNP power transistors • Four functions for each channel - Forward/Reserve/Stop/ Brake functions • Special output pin for an RC car application - for a Turbo function for Ch.A five-function RF receiver chip RX-2 interface • Low stand-by current typ. 0.1uA • Wide supply voltage range PVCC=1.8V ~ 9.0V suitable for battery operated applications • 3.3V and 5V micro-controller interface • Low output saturation voltage upper and lower total typ. 0.2A • High current outputs max. 1.5A/Ch. • Parallel connection Max Current 3A • High thermal capability for high continuous output currents • Built-in spark killing diodes • Built-in a thermal shutdown TSD function with hysteresis • Short circuit protected • Temperature independent internal voltage reference The FAN8100N/FAN8100MTC is a monolithic two channel dc motor drive IC designed for low voltage operated systems. It has dual H-bridge drivers, using NPN and verticalPNP power transistors with a low saturation voltage. Power packages with heat sinks endure high continuous output current. The high current and low saturation voltage feature make this device suitable for dc motor applications such as toy cars. It has also a built-in thermal shutdown protection circuit with hysteresis. 12-DIPH-300 14-TSSOP • General purpose dc motor driver • Electronic toys - robots, RC cars • Digital still camera DSC and film camera • Home appliances and office equipment • Precision instruments Ordering Information Device FAN8100N FAN8100MTC FAN8100MTCX Package 12-DIPH-300 14-TSSOP 14-TSSOP Operating Temp. −20 ~ +75°C −20 ~ +75°C −20 ~ +75°C 2005 Fairchild Semiconductor Corporation OUT2B GND OUT1B PVCCB VCC GND OUT1B PVCCB VCC D1A PVCCA OUT1A FAN8100N/FAN8100MTC Pin Assignments 12 11 10 FIN FAN8100N 14 13 12 11 10 9 8 FAN8100MTC 123 4567 Pin Definitions Pin Number 1 12 2 13 3 14 FIN 1 4 2 5 3 6 4 7 5 8 6 9 7 FIN 8 10 9 11 10 12 11 OUT2B GND OUT1B PVCCB Note FAN8100MTC Pin Function Description Forward logic input for channel B Output2 of channel B Ground Output1 of channel B Supply voltage for channel B output Logic and control circuit supply voltage Cathode of OUT1A upper diode Supply voltage for channel A output Output1 of channel A Ground Output2 of channel A Forward logic input for channel A Internal Block Diagram Ch. A Control Circuit Bias & TSD Circuit Ch. B Control Circuit FAN8100N/FAN8100MTC 7 D1A 8 PVCCA 9 OUT1A 10 OUT2A 5 PVCCB 4 OUT1B 3 OUT2B Fin GND

PDF Datasheet Preview

FAN8100N/FAN8100MTC

Low Voltage/Low Saturation 2-CH DC Motor Driver
• Two channel H-bridge drivers with built-in NPN and vertical-PNP power transistors
• Four functions for each channel - Forward/Reserve/Stop/ Brake functions
• Special output pin for an RC car application - for a Turbo function for Ch.A five-function RF receiver chip RX-2 interface
• Low stand-by current typ. 0.1uA
• Wide supply voltage range PVCC=1.8V ~ 9.0V suitable
for battery operated applications
• 3.3V and 5V micro-controller interface
• Low output saturation voltage upper and lower total typ.
0.2A
• High current outputs max. 1.5A/Ch.
• Parallel connection Max Current 3A
• High thermal capability for high continuous output
currents
• Built-in spark killing diodes
• Built-in a thermal shutdown TSD function with
hysteresis
• Short circuit protected
• Temperature independent internal voltage reference

The FAN8100N/FAN8100MTC is a monolithic two channel dc motor drive IC designed for low voltage operated systems. It has dual H-bridge drivers, using NPN and verticalPNP power transistors with a low saturation voltage. Power packages with heat sinks endure high continuous output current. The high current and low saturation voltage feature make this device suitable for dc motor applications such as toy cars. It has also a built-in thermal shutdown protection circuit with hysteresis.
12-DIPH-300
14-TSSOP
• General purpose dc motor driver
• Electronic toys - robots, RC cars
• Digital still camera DSC and film camera
• Home appliances and office equipment
• Precision instruments
Ordering Information

Device FAN8100N FAN8100MTC FAN8100MTCX

Package 12-DIPH-300 14-TSSOP 14-TSSOP

Operating Temp. −20 ~ +75°C −20 ~ +75°C −20 ~ +75°C
2005 Fairchild Semiconductor Corporation

OUT2B GND

OUT1B PVCCB

VCC GND OUT1B PVCCB VCC D1A PVCCA OUT1A

FAN8100N/FAN8100MTC

Pin Assignments
12 11 10 FIN

FAN8100N
14 13 12 11 10 9 8

FAN8100MTC
123 4567

Pin Definitions

Pin Number 1 12 2 13 3 14 FIN 1 4 2 5 3 6 4 7 5 8 6 9 7 FIN 8 10 9 11 10 12 11

OUT2B GND

OUT1B PVCCB

Note FAN8100MTC

Pin Function Description

Forward logic input for channel B

Output2 of channel B

Ground

Output1 of channel B

Supply voltage for channel B output

Logic and control circuit supply voltage

Cathode of OUT1A upper diode

Supply voltage for channel A output

Output1 of channel A

Ground

Output2 of channel A

Forward logic input for channel A

Internal Block Diagram

Ch. A Control Circuit

Bias & TSD Circuit

Ch. B Control Circuit

FAN8100N/FAN8100MTC
7 D1A 8 PVCCA 9 OUT1A 10 OUT2A
5 PVCCB 4 OUT1B 3 OUT2B

Fin GND

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FAN8100N Datasheet file may be downloaded here without warranties.

Datasheet ID: FAN8100N 513999