DM74S00N

DM74S00N Datasheet

DM74S00 Quad 2-Input NAND Gate

Part	Datasheet
DM74S00N	DM74S00N (pdf)

PDF Datasheet Preview
DM74S00 Quad 2-Input NAND Gate DM74S00 Quad 2-Input NAND Gate This device contains four independent gates each of which performs the logic NAND function. Ordering Code: Order Number Package Number Package Description DM74S00M M14A 14-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-120, Narrow DM74S00N N14A 14-Lead Plastic Dual-In-Line Package PDIP , JEDEC MS-001, Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Connection Diagram Function Table Y = AB Inputs H = HIGH Logic Level L = LOW Logic Level Output Y H L 2000 Fairchild Semiconductor Corporation DS006489 DM74S00 Absolute Maximum Ratings Note 1 Supply Voltage Input Voltage 5.5V Operating Free Air Temperature Range 0°C to +70°C Storage Temperature Range −65°C to +150°C Note 1 The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Recommended Operating Conditions VCC VIH VIL IOH IOL TA Parameter Supply Voltage HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Current LOW Level Output Current Free Air Operating Temperature −1 Electrical Characteristics over recommended operating free air temperature range unless otherwise noted Parameter Conditions VI VOH II IIH IIL IOS ICCH ICCL Input Clamp Voltage HIGH Level Output Voltage LOW Level Output Voltage Input Current Max Input Voltage HIGH Level Input Current LOW Level Input Current Short Circuit Output Current Supply Current with Outputs HIGH Supply Current with Outputs LOW VCC = Min, II = −18 mA VCC = Min, IOH = Max VIL = Max VCC = Min, IOL = Max VIH = Min VCC = Max, VI = 5.5V VCC = Max, VI = 2.7V VCC = Max, VI = 0.5V VCC = Max Note 3 VCC = Max VCC = Max Note 2 −2 −40 −100 Switching Characteristics at VCC = 5V and TA = 25°C See Section 1 for Test Waveforms and Output Load Parameter CL = 15 pF CL = 50 pF tPLH Propagation Delay Time LOW-to-HIGH Level Output

PDF Datasheet Preview

DM74S00 Quad 2-Input NAND Gate

DM74S00 Quad 2-Input NAND Gate

This device contains four independent gates each of which performs the logic NAND function.
Ordering Code:

Order Number Package Number

Package Description

DM74S00M

M14A
14-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-120, Narrow

DM74S00N

N14A
14-Lead Plastic Dual-In-Line Package PDIP , JEDEC MS-001, Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.

Connection Diagram

Function Table

Y = AB

Inputs

H = HIGH Logic Level L = LOW Logic Level

Output Y H L
2000 Fairchild Semiconductor Corporation DS006489

DM74S00

Absolute Maximum Ratings Note 1

Supply Voltage

Input Voltage
5.5V

Operating Free Air Temperature Range 0°C to +70°C

Storage Temperature Range
−65°C to +150°C

Note 1 The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation.

Recommended Operating Conditions

VCC VIH VIL IOH IOL TA

Parameter Supply Voltage HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Current LOW Level Output Current Free Air Operating Temperature
−1

Electrical Characteristics
over recommended operating free air temperature range unless otherwise noted

Parameter

Conditions

VI VOH

II IIH IIL IOS ICCH ICCL

Input Clamp Voltage HIGH Level Output Voltage LOW Level Output Voltage Input Current Max Input Voltage HIGH Level Input Current LOW Level Input Current Short Circuit Output Current Supply Current with Outputs HIGH Supply Current with Outputs LOW

VCC = Min, II = −18 mA VCC = Min, IOH = Max VIL = Max VCC = Min, IOL = Max VIH = Min VCC = Max, VI = 5.5V VCC = Max, VI = 2.7V VCC = Max, VI = 0.5V VCC = Max Note 3 VCC = Max VCC = Max

Note 2
−2
−40
−100

Switching Characteristics
at VCC = 5V and TA = 25°C See Section 1 for Test Waveforms and Output Load

Parameter

CL = 15 pF

CL = 50 pF
tPLH

Propagation Delay Time

LOW-to-HIGH Level Output

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DM74S00N Datasheet file may be downloaded here without warranties.

Datasheet ID: DM74S00N 513817